Filter by:
ZCC-CT Carbide Milling Cutters for All Applications
ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters
Series: HM-4E
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£14.53 excl. VAT
£17.44 incl. VAT
£14.53 excl. VAT
£17.44 incl. VAT
ZCC-CT UM-4E Series 4 Flute Variable Helix Milling Cutters
Series: UM-4E
ZCC-CT UM-4E Series 4 Flute Standard Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
Starting From:
£15.19 excl. VAT
£18.23 incl. VAT
£15.19 excl. VAT
£18.23 incl. VAT
Offer Price From:
£12.91excl. VAT
£15.49incl. VAT
£12.91excl. VAT
£15.49incl. VAT
ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters
Series: HM-2BP
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£21.79 excl. VAT
£26.15 incl. VAT
£21.79 excl. VAT
£26.15 incl. VAT
ZCC-CT HM-6E Series 6 Flute End Mill with Straight Shank for Hardened Steel Machining
Series: HM-6E
ZCC-CT HM-6E 6 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£26.10 excl. VAT
£31.32 incl. VAT
£26.10 excl. VAT
£31.32 incl. VAT
ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining
Series: HM-2BL
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£38.11 excl. VAT
£45.73 incl. VAT
£38.11 excl. VAT
£45.73 incl. VAT
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck for Hardened Steel
Series: HM-2EP
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£19.74 excl. VAT
£23.69 incl. VAT
£19.74 excl. VAT
£23.69 incl. VAT
ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel
Series: HM-4EL
ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£22.97 excl. VAT
£27.56 incl. VAT
£22.97 excl. VAT
£27.56 incl. VAT
ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel
Series: HM-4R
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£25.50 excl. VAT
£30.60 incl. VAT
£25.50 excl. VAT
£30.60 incl. VAT
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
Series: HM-4B
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£32.54 excl. VAT
£39.05 incl. VAT
£32.54 excl. VAT
£39.05 incl. VAT
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
Series: NM-2BP
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
Starting From:
£20.11 excl. VAT
£24.13 incl. VAT
£20.11 excl. VAT
£24.13 incl. VAT
ZCC-CT HM-2ES Series 2 Flute Micro Diameter End Mill with Straight Shank for Hardened Steel Machining
Series: HM-2ES
ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
- Starting at 0.3mm diameter
Starting From:
£12.31 excl. VAT
£14.77 incl. VAT
£12.31 excl. VAT
£14.77 incl. VAT
ZCC-CT UM-4R 4 Flute Corner Radius Variable Helix End Mill
Series: UM-4R
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
Starting From:
£22.26 excl. VAT
£26.71 incl. VAT
£22.26 excl. VAT
£26.71 incl. VAT
Offer Price From:
£18.92excl. VAT
£22.70incl. VAT
£18.92excl. VAT
£22.70incl. VAT
2 Flute Corner Radius Long Length End Mill for Aluminium
Series: AL-2RL
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
Starting From:
£45.15 excl. VAT
£54.18 incl. VAT
£45.15 excl. VAT
£54.18 incl. VAT
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
Series: NM-2EP
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
Starting From:
£17.68 excl. VAT
£21.22 incl. VAT
£17.68 excl. VAT
£21.22 incl. VAT
ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill
Series: VSM-4E
ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill
- Solid micrograin carbide
- Variable helix geometry
- ALTiN coated
- Sharp cutting edge designed for HRSA
- Smooth machining with minimal vibration
- One tool for roughing and finishing
- Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
- High metal removal rates
Starting From:
£20.39 excl. VAT
£24.47 incl. VAT
£20.39 excl. VAT
£24.47 incl. VAT
Offer Price From:
£17.33excl. VAT
£20.80incl. VAT
£17.33excl. VAT
£20.80incl. VAT
ZCC-CT HM-4RP 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel
Series: HM-4RP
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£26.25 excl. VAT
£31.50 incl. VAT
£26.25 excl. VAT
£31.50 incl. VAT
ZCC-CT HM-2E Series 2 Flute End Mill with Straight Shank for Hardened Steel Machining
Series: HM-2E
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£17.49 excl. VAT
£20.99 incl. VAT
£17.49 excl. VAT
£20.99 incl. VAT
ZCC-CT UM-4EFP 4 Flute Short Cutting Edge Variable Helix End Mill
Series: UM-4EFP
ZCC-CT UM-4EFP Series 4 Flute Short Cutting Edge AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
Starting From:
£22.36 excl. VAT
£26.83 incl. VAT
£22.36 excl. VAT
£26.83 incl. VAT
Offer Price From:
£19.01excl. VAT
£22.81incl. VAT
£19.01excl. VAT
£22.81incl. VAT
ZCC-CT UM-4ELP-W 4 Flute Long Cutting Edge Weldon Shank Variable Helix End Mill
Series: UM-4ELP-W
ZCC-CT UM-4ELP-W Series 4 Flute Long Length Weldon shank AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
Starting From:
£25.13 excl. VAT
£30.16 incl. VAT
£25.13 excl. VAT
£30.16 incl. VAT
Offer Price From:
£21.36excl. VAT
£25.63incl. VAT
£21.36excl. VAT
£25.63incl. VAT
ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining
Series: HM-2B
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
4 Flute CrN Coated Carbide Aluminium End Mill
Series: NM-4E
4 Flute CrN Coated Carbide Aluminium End Mill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
Starting From:
£14.70 excl. VAT
£17.64 incl. VAT
£14.70 excl. VAT
£17.64 incl. VAT
ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel
Series: HM-4BL
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£38.11 excl. VAT
£45.73 incl. VAT
£38.11 excl. VAT
£45.73 incl. VAT
ZCC-CT HM-6EL Series 6 Flute End Mill with Long Straight Shank for Hardened Steel Machining
Series: HM-6EL
ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£29.81 excl. VAT
£35.77 incl. VAT
£29.81 excl. VAT
£35.77 incl. VAT
2 Flute CrN Coated Carbide Aluminium Slot Drill
Series: NM-2E
2 Flute CrN Coated Carbide Aluminium Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
Starting From:
£13.30 excl. VAT
£15.96 incl. VAT
£13.30 excl. VAT
£15.96 incl. VAT