Burnishing Tools

• Tool designed for burnishing on sliding head lathes, on various profiles
• The roll is supported between axial bearings
• Usable on pieces of different types of materials with hardness of 45 HRC
• Tool supplied with a single burnishing roll

• Tool designed for burnishing on sliding head lathes, on various profiles
• Possibility of burnishing up to one face
• Usable on pieces of different types of materials with hardness of 45 HRC
• Tool supplied with a single burnishing roll

• Tool designed for burnishing on sliding head lathes, on various profiles
• The roll is supported between axial bearings
• Usable on pieces of different types of materials with hardness of 45 HRC
• Tool supplied with a single burnishing roll

• Tool designed for burnishing on sliding head lathes, on various profiles
• Possibility of burnishing up to one face
• Usable on pieces of different types of materials with hardness of 45 HRC
• Tool supplied with a single burnishing roll

• Tool designed for burnishing on lathes, on various profiles
• Rotating head with graduated scale (Fig. 1&2)
• Head provided with an internal spring system that regulates the pressure making it homogeneous in all the parts (Fig.3)
• The roll is supported between axial bearings
• Usable on pieces of different types of materials with hardness of 45 HRC
• Carbide pin
• Provided with a U type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4
• Tool supplied with a single burnishing roll

• Tool designed for burnishing on lathes, on various profiles
• Usable on pieces of different types of materials with hardness of 45 HRC
• Provided with a U type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4
• Tool supplied with a single burnishing roll

• Tool designed for burnishing on lathes, on various profiles
• Usable on pieces of different types of materials with hardness of 45 HRC
• Provided with a E type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4
• Tool supplied with a single burnishing roll

• Tool designed for burnishing on lathes, on various profiles
• Usable on pieces of different types of materials with hardness of 45 HRC
• Provided with a B type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4
• Tool supplied with a single burnishing roll

• Tool designed for burnishing internal and/or external surfaces
• For burnishing holes from Ø22 mm x 70 mm deep
• Usable on workpiece of different types of materials with hardness up to 45 HRC
• Tool supplied with a single burnishing roll

• Usable on pieces of different types of materials with hardness of 45 HRC
• Form E roll for use with form E tools
• Provided with a U type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4
• Tool supplied with a single burnishing roll

• Form B for use with form B tools
• Usable on pieces of different types of materials with hardness of 45 HRC
• Provided with a B type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4
• Tool supplied with a single burnishing roll

• Usable on pieces of different types of materials with hardness of 45 HRC
• Form U for use with form U tools
• Provided with a U type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4

• Tool designed for burnishing external diameters of various shapes on sliding head lathes
• The diamond tip is aligned with the top face of the shank
• The pressure of the head can be adjusted in order to obtain different levels of burnishing on the workpiece
• Can be used on workpiece made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the life of the tool

• Tool designed for burnishing on lathes, on various profiles
• Diamond tip aligned with the top face of the shank
• The head is equipped with an internal spring system to regulate the pressure of the diamond tip, making it homogeneous on all parts
• Can be used on workpieces made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the life of the tool

• Tool designed for burnishing on lathes, on various profiles
• Diamond tip aligned with the the centre of the shank
• The head is equipped with an interal spring system to regulate the pressure of the diamond tip, making it homogenous on all parts (Fig.1)
• Can be used on workpieces made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the life of the tool

• Tool designed for burnishing on lathes, on various profiles
• Diamond tip aligned with the top face of the shank
• The head is equipped with an internal spring sytem to regulate the pressure of the diamond tip, making it homogeneous on all parts (Fig.3)
• Can be used on workpieces made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the tool life

• Tool designed for burnishing on lathes, on various profiles
• Diamond tip aligned with the top of the shank
• Rotating head with graduated scale
• Can be used on workpieces made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the life of the tool

• 30 degree angle
• Tool designed for burnishing on lathes, external surfaces of various shapes
• Compact design
• Indexable diamond tip for extended tool life
• Tool head supported by an internal preload spring system, for constant pressure on all parts
• Can be used on different mateiral with hardness up to 63HRC
• Diamond tip not included

• 45 degree angle
• Tool designed for burnishing on lathes, external surfaces of various shapes
• Compact design
• Indexable diamond tip for extended tool life
• Tool head supported by an internal preload spring system, for constant pressure on all parts
• Can be used on different mateiral with hardness up to 63HRC
• Diamond tip not included

• 60 degree angel
• Tool designed for burnishing on lathes, external surfaces of various shapes
• Compact design
• Indexable diamond tip for extended tool life
• Tool head supported by an internal preload spring system, for constant pressure on all parts
• Can be used on different mateiral with hardness up to 63HRC
• Diamond tip not included

• High performance diamond tip
• For burnishing materials up to HRC 63
• Polished surface Ra 0.2
• Various positions of use by indexing the tip, to increase the tool life
• 0.4mm - 2mm radius available