ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

0.5MM 2 FLUTE CrN COATED MICRO END MILL

Solid Carbide End Mill Ø 0.5; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 0.5; Z=2; Shaft HA; coated

0.8MM 2 FLUTE MICRO END MILL CrN COATED

Solid Carbide End Mill Ø 0.8; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 0.8; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 0.8; Z=2; Shaft HA; coated

1MM 2 FLUTE CrN COATED ALUMINIUM END MILL

Solid Carbide End Mill Ø 1.0; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 1.0; Z=2; Shaft HA; coated

2 FLUTE CrN COATED ALUMINIUM END MILL

2 FLUTE CrN COATED ALUMINIUM END MILL

2 FLUTE CrN COATED ALUMINIUM SLOT DRILL

1.5MM 2 FLUTE CrN COATED ALUMINIUM CUTTER

Solid Carbide End Mill Ø 1.5; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

2 FLUTE CrN COATED ALUMINIUM END MILL

2 FLUTE CrN COATED ALUMINIUM END MILL

2.5MM 2 FLUTE ALU RIP PROCESSING CUTTER

Solid Carbide End Mill Ø 3.0; Z=2; Shaft HA; coated

2 FLUTE CrN COATED ALUMINIUM END MILL

Solid Carbide End Mill Ø 4.0; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 4.0; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 5.0; Z=2; Shaft HA; coated

Solid Carbide End Mill Ø 5.0; Z=2; Shaft HA; coated