Milling Cutters for Machining Aluminium and Non-Ferrous Materials

Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm


£6.13 excl. VAT
£7.36 incl. VAT
£3.98excl. VAT
£4.78incl. VAT
Ali-Mill 3 Flute 45 Degree Carbide Milling Cutters for Aluminium
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£9.08 excl. VAT
£10.90 incl. VAT
£5.90excl. VAT
£7.08incl. VAT
HSC Series 2 Flute Tialn Coated HSS Milling Cutters
- 2 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£10.93 excl. VAT
£13.12 incl. VAT
£7.10excl. VAT
£8.52incl. VAT
HSC Series 3 Flute Tialn Coated HSS Milling Cutters
- 3 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£9.10 excl. VAT
£10.92 incl. VAT
£5.92excl. VAT
£7.10incl. VAT
HSCR Series Tialn Coated Fine Pitch Roughing HSS Milling Cutters
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£19.51 excl. VAT
£23.41 incl. VAT
£12.68excl. VAT
£15.22incl. VAT
Ali-Mill 2 Flute 45 Degree Carbide Milling Cutters for Aluminium
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£9.08 excl. VAT
£10.90 incl. VAT
£5.90excl. VAT
£7.08incl. VAT
Ali-Max 3 Flute Long Length Milling Cutters For Aluminium
ALI-MAX Solid Carbide 3 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
£17.32 excl. VAT
£20.78 incl. VAT
£16.52excl. VAT
£19.82incl. VAT
HSC Series 4 Flute Tialn Coated HSS Milling Cutters
- 4 flute HSSE end mill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£10.93 excl. VAT
£13.12 incl. VAT
£7.10excl. VAT
£8.52incl. VAT
Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm


£6.13 excl. VAT
£7.36 incl. VAT
£3.98excl. VAT
£4.78incl. VAT
Ali-Max 2 Flute Solid Carbide Milling Cutters for Machining Aluminium
ALI-MAX Solid Carbide 2 Flute Slot Drill from Nano-Mill
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
- Ideal for aluminium and non-ferrous machining
£7.40 excl. VAT
£8.88 incl. VAT
£3.80excl. VAT
£4.56incl. VAT
Ali-Max 3 Flute Solid Carbide Milling Cutters for Machining Aluminium
ALI-MAX Solid Carbide 3 Flute End Mill from Nano-Mill
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
- Ideal for aluminium and non-ferrous machining
£8.23 excl. VAT
£9.88 incl. VAT
Alu-Cut 2544K Series 2 & 3 Flute Long Length Milling Cutters
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- GLT coated for improved tool life, works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£38.73 excl. VAT
£46.48 incl. VAT
£33.57excl. VAT
£40.28incl. VAT
Eco-Mill 2 Flute Coated Solid Carbide Slot Drill
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm


£6.13 excl. VAT
£7.36 incl. VAT
£3.98excl. VAT
£4.78incl. VAT
FRANKEN Alu-Cut 2544 Series 2 & 3 Flute Long Length End mill
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£28.86 excl. VAT
£34.63 incl. VAT
£25.01excl. VAT
£30.01incl. VAT
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£14.68 excl. VAT
£17.62 incl. VAT
£12.48excl. VAT
£14.98incl. VAT
Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium
Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£9.79 excl. VAT
£11.75 incl. VAT
£8.32excl. VAT
£9.98incl. VAT
2 Flute Long Length End Mill for Aluminium LAE Series
ALI-MAX Solid Carbide 2 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
£17.32 excl. VAT
£20.78 incl. VAT
£119.47excl. VAT
£143.36incl. VAT
2 Flute Carbide Reduced Neck End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£14.31 excl. VAT
£17.17 incl. VAT
£12.16excl. VAT
£14.59incl. VAT
Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill
Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon shank
- Suitable for a wide range of materials
£7.12 excl. VAT
£8.54 incl. VAT
£6.05excl. VAT
£7.26incl. VAT
Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill
Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill
- HSS 8% cobalt
- Uncoated
- Weldon shank
- Suitable for a wide range of materials
£4.85 excl. VAT
£5.82 incl. VAT
£4.12excl. VAT
£4.94incl. VAT
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£21.70 excl. VAT
£26.04 incl. VAT
£18.45excl. VAT
£22.14incl. VAT
Alu-XP 2 Flute Carbide Slot Drill for Aluminium
Alu-XP 2 Flute Carbide Slot Drill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
£9.64 excl. VAT
£11.57 incl. VAT
£8.19excl. VAT
£9.83incl. VAT
NANO-MILL Ali-Max AB**02 Series 2 Flute Ball Nose Solid Carbide End Mill for Machining Aluminium
ALI-MAX Solid Carbide 2 Flute Ball Nose End Mill from Nano-Mill is 1st choice for machining aluminium and non ferrous material, giving superior surface finish. The special Hi-Helix geometry enables better chip removal.
£9.55 excl. VAT
£11.46 incl. VAT
£4.98excl. VAT
£5.98incl. VAT