Aluminium & Non-Ferrous Milling Cutters Milling Tools

CLARKSON HSS Co8 TiAlN Coated 3 Flute Long Length End Mill

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill 

• HSS 8% cobalt
• Uncoated 
• Weldon shank
• Suitable for a wide range of materials

CLARKSON TiALN HSS Co8 2 Flute Long Length Ball Nose Slot Drill

• HSS 8% cobalt 
• TiALN coated
• Weldon (flatted) shank
• Suitable for a wide range of materials

CLARKSON HSS CO8 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank
• Suitable for aluminium and non-ferrous materials

Clarkson 4-6 Flute HSS Co8 TiAlN Coated Short Length End Mill

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

ALU-XP 113202 2 Flute Extended Neck High Helix Ball Nose Milling Cutter for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Excellent surface finishes

• Superior chip removal.

• Neck relief.

• Mirror polished flutes.

Alu-XP 126103 2 Flute Long Weldon Rougher for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Exellent surface finishes.

• superior chip removal.

• Corner protected

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• GLT coated for improved tool life works in copper alloys in addition to aluminium
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Clarkson 2 Flute HSS Co8 TiALN Coated Extra-Long Length Slot Drill

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

AL-2R 2 Flute Corner Radius End Mill for Aluminium

• Newly developed geometry
• New KMD401 diamond like coating for significantly improved tool life
• Wide range of radii available on larger diameters

Franken Alu-Cut solid carbide 3 flute end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

Features:

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Several corner radii per cutting diameter
• Suitable for z-axis milling
• Suitable for roughing and finishing
• Low-vibration machining

CLARKSON HSS Co8 4 Flute Ball Nose End Mill

• HSS 8% cobalt 
• Uncoated
• Weldon (flatted) shank
• Suitable for a wide range of materials

CLARKSON HSS TiALN coated 1 Flute End Mill for Aluminium

• HSS
• Uncoated
• Suitable for aluminium and non-ferrous material

ALU-XP 155303 2 Flute Extended Neck 30 Degree Helix Corner Radius End Mill for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Excellent surface finishes.

• Superior chip removal.

• Corner radius

CLARKSON TiALN HSS Co8 2 Flute Ball Nose Slot Drill

• HSS 8% cobalt 
• TiALN coated
• Weldon (flatted) shank
• Suitable for a wide range of materials

Alu-XP 126303 2 Flute Long Roughing End Mill for Aluminium

• Excellent surface finishes.

• Superior chip removal.

• Reinforced cutting edge.

• Corner protected.

• Mirror polished" flutes.

CLARKSON Series HSS Co8 3 Flute Long Length Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.

Clarkson 3 Flute HSS Co8 Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

4 Flute CrN Coated Carbide Aluminium End Mill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 1mm-12mm 

Clarkson 3 Flute HSS Co8 TiAlN Coated Short Length End Mill 

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

Clarkson 2 Flute HSS Co8 Extra-Long Length Slot Drill

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

Alu-XP 125103 3 Flute Long Roughing End Mill for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Exellent surface finishes

• Superior chip removal.

• Corner protected.