


Emuge-Franken 2546 Series 3 Flute Carbide Corner Radius End Mill for Aluminium & Non-Ferrous Machining
Series: 2546
Franken Alu-Cut solid carbide 3 flute end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
Features:- High performance tool.
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Several corner radii per cutting diameter
- Suitable for z-axis milling
- Suitable for roughing and finishing
- Low-vibration machining
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R0,5 / 6 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,0 / 6 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,0 / 8 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,5 / 8 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R2,0 / 8 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,0 / 10 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,5 / 10 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R2,0 / 10 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,0 / 12 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,5 / 12 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R2,0 / 12 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R2,5 / 12 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R3,0 / 12 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R4,0 / 12 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,0 / 16 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,5 / 16 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R2,0 / 16 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R2,5 / 16 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R3,0 / 16 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R4,0 / 16 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,0 / 20 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R1,5 / 20 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R2,0 / 20 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R2,5 / 20 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R3,0 / 20 mm
In Stock
subject to
availability
Carbide end mill Alu-Cut long typeW R4,0 / 20 mm