2 Flute Milling Cutters Milling Tools
Pulsar Blue 2 Flute Rib Processing Slot Drill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£26.94 excl. VAT
£32.33 incl. VAT
Alu-XP 3 Flute Long Length Weldon Shank Ripper
Alu-XP 3 Flute Long Length Weldon Shank Ripper
- Excellent surface finishes.
- Superior chip removal.
- Flatted shank.
- Micrograin solid carbide substrate.
- Corner protected.
£25.00 excl. VAT
£30.00 incl. VAT
£10.38 excl. VAT
£12.46 incl. VAT
CLARKSON HSS Co8 2 Flute Ball Nose Slot Drill
CLARKSON HSS Co8 2 Flute Ball Nose Slot Drill
- HSS 8% cobalt
- uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£11.94 excl. VAT
£14.33 incl. VAT
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£19.10 excl. VAT
£22.92 incl. VAT
NANO-MILL Max-Mill JLNR Series Coated Carbide 2 Flute Corner Radius Long Length End Mill
Max-Mill Coated Carbide 2 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£13.50 excl. VAT
£16.20 incl. VAT
CLARKSON TiALN HSS Co8 2 Flute Long Length Ball Nose Slot Drill
CLARKSON TiALN HSS Co8 2 Flute Long Length Ball Nose Slot Drill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£36.10 excl. VAT
£43.32 incl. VAT
ZCC-CT HM-2E Series 2 Flute End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£18.90 excl. VAT
£22.68 incl. VAT
ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£33.18 excl. VAT
£39.82 incl. VAT
Clarkson 2 Flute HSS Co8 Weldon Shank Long Length Slot Drill
Clarkson 2 Flute HSS Co8 Weldon Shank Long Length Slot Drill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£31.82 excl. VAT
£38.18 incl. VAT
CLARKSON HSS Co8 2 Flute Long Length Threaded Shank Slot Drill
CLARKSON HSS Co8 2 Flute Long Length Threaded Shank Slot Drill
- HSS 8% cobalt
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£8.67 excl. VAT
£10.40 incl. VAT
CLARKSON HSS Co8 Threaded Shank End Mill
CLARKSON HSS Co8 Threaded Shank End Mill
- HSS 8% cobalt
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£6.15 excl. VAT
£7.38 incl. VAT
Alu-XP 154303 Series 2 Flute Carbide Long Length End Mill for Aluminium & Non-Ferrous Machining
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£11.82 excl. VAT
£14.18 incl. VAT
Clarkson 2 Flute HSS Threaded Shank Long Length Slot Drill
Clarkson 2 Flute HSS Threaded Shank Long Length Slot Drill
- HSS
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£6.27 excl. VAT
£7.52 incl. VAT
Clarkson 2 Flute HSS Threaded Shank Slot Drill
Clarkson 2 Flute HSS Threaded Shank Slot Drill
- HSS
- Threaded shank
- Uncoated
- Suitable for a wide range of materials
£4.05 excl. VAT
£4.86 incl. VAT
NANO-MILL Max-Mill JKB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 150mm OAL
£33.65 excl. VAT
£40.38 incl. VAT
2 Flute CrN Coated Carbide Aluminium Slot Drill
2 Flute CrN Coated Carbide Aluminium Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£14.38 excl. VAT
£17.26 incl. VAT
AL-2R 2 Flute Corner Radius End Mill for Aluminium
AL-2R 2 Flute Corner Radius End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£43.38 excl. VAT
£52.06 incl. VAT
Pulsar Blue 2 Flute Corner Radius Rib Processing Slot Drill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Corner Radius Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£34.21 excl. VAT
£41.05 incl. VAT
Pulsar Blue 2 Flute Corner Radius Rib Processing End Mill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Corner Radius Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£30.02 excl. VAT
£36.02 incl. VAT
Pulsar Blue 2 Flute Rib Processing Ball Nose Micro End Mill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Ball Nosed Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£39.42 excl. VAT
£47.30 incl. VAT
Alu-XP 156303 Series 2 Flute Carbide Corner Radius Reduced Neck End Mill for Aluminium & Non-Ferrous Machining
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£39.85 excl. VAT
£47.82 incl. VAT
Alu-XP 125103 Series 3 Flute Long Length Roughing End Mill for Machining Aluminium
£23.86 excl. VAT
£28.63 incl. VAT
Alu-XP 126103 Series 2 Flute 45 Degree Helix Long Length Weldon Shank Roughing End Mill for Machining Aluminium
£36.90 excl. VAT
£44.28 incl. VAT