Expert advice available from time served engineers.We offer free carriage on all orders over £39 to mainland UK.Chat with us either by phone, online or email.Click to view our current special offers.
Filter by:

Milling Cutters ZCC-CT

Image of product.

ZCC-CT Coated Carbide 2 Flute Slot Drills Long Length

Series: PM2EL
  • For Machining Up To 55HRC
  • Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
  • Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
  • Diameter Range 3mm - 20mm 
  • Solid Micrograin Carbide
  • PVD Coated Substrate
Starting From:
£22.16 excl. VAT
£26.59 incl. VAT
Offer Price From:
£16.45excl. VAT
£19.74incl. VAT
15% DISCOUNT

Image of product.

ZCC-CT Coated Carbide 4 Flute End Mills Long Length

Series: PM4EL
  • For Machining Up To 55HRC
  • Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
  • Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
  • Diameter Range 3mm - 20mm 
  • Solid Micrograin Carbide
  • PVD Coated Substrate
Starting From:
£22.69 excl. VAT
£27.23 incl. VAT
Offer Price From:
£16.83excl. VAT
£20.20incl. VAT
15% DISCOUNT

ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

2 Flute Coated Aluminium Rib Processing Micro Slot Drill

Series: NM-2EP

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
Starting From:
£19.12 excl. VAT
£22.94 incl. VAT

ZCC-CT NM-2BP 2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro End Mill

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

Series: NM-2BP

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
Starting From:
£21.75 excl. VAT
£26.10 incl. VAT

ZCC-CT 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining

ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining

Series: HM-2BL

ZCC-CT 2 Flute Long Length Ball Nose Slot Drill 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
In stock
Starting From:
£41.61 excl. VAT
£49.93 incl. VAT

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank

ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters

Series: HM-4E

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£16.48 excl. VAT
£19.78 incl. VAT

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck.

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck for Hardened Steel

Series: HM-2EP

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£21.56 excl. VAT
£25.87 incl. VAT

ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank

ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining

Series: HM-2B

ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
In stock
Starting From:
£32.22 excl. VAT
£38.66 incl. VAT

Image of product.

ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters

Series: HM-2BP

ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£23.79 excl. VAT
£28.55 incl. VAT

ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank

ZCC-CT HM-2ES Series 2 Flute Micro Diameter End Mill with Straight Shank for Hardened Steel Machining

Series: HM-2ES

ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
  • Starting at 0.3mm diameter
Starting From:
£13.45 excl. VAT
£16.14 incl. VAT

ZCC-CT HM-4R 4 Flute Corner Radius End Mill with Straight Shank.

ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel

Series: HM-4R

ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£27.85 excl. VAT
£33.42 incl. VAT

ZCC-CT 4 Flute Long Length End Mill

ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel

Series: HM-4EL

ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£25.56 excl. VAT
£30.67 incl. VAT

ZCC-CT HM-6E 6 Flute End Mill with Straight Shank

ZCC-CT HM-6E Series 6 Flute End Mill with Straight Shank for Hardened Steel Machining

Series: HM-6E

ZCC-CT HM-6E 6 Flute End Mill with Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
In stock
Starting From:
£29.05 excl. VAT
£34.86 incl. VAT

ZCC-CT 4 Flute Reduced Neck End Mill for Hardened Steel Machining.

ZCC-CT HM-4EFP 4 Flute With Reduced Neck for Hardened Steel

Series: HM-4EFP

ZCC-CT HM-4EFP 4 Flute Reduced Neck End Mill with Straight Shank For Hardened Steels

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£35.18 excl. VAT
£42.22 incl. VAT

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

ZCC-CT HM-6EL Series 6 Flute End Mill with Long Straight Shank for Hardened Steel Machining

Series: HM-6EL

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£33.17 excl. VAT
£39.80 incl. VAT

ZCC-CT 2 Flute Long Length Corner Radius End Mill.

2 Flute Corner Radius Long Length End Mill for Aluminium

Series: AL-2RL

2 Flute Corner Radius Long Length End Mill for Aluminium

  • Newly developed geometry
  • New KMD401 diamond like coating for significantly improved tool life
  • Wide range of radii available on larger diameters
Starting From:
£50.22 excl. VAT
£60.26 incl. VAT

ZCC-CT 2 Flute CrN Coated Aluminium End Mill

2 Flute CrN Coated Carbide Aluminium Slot Drill

Series: NM-2E

2 Flute CrN Coated Carbide Aluminium Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 1mm-12mm 
Starting From:
£14.39 excl. VAT
£17.27 incl. VAT

ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel Machining.

ZCC-CT HM-4RP 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel

Series: HM-4RP

ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£26.25 excl. VAT
£31.50 incl. VAT

Image of product.

ZCC-CT HM-2E Series 2 Flute End Mill with Straight Shank for Hardened Steel Machining

Series: HM-2E

ZCC-CT HM-2E 2 Flute End Mill with Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£19.11 excl. VAT
£22.93 incl. VAT

ZCC-CT 2 Flute Corner Radius End Mill.

AL-2R 2 Flute Corner Radius End Mill for Aluminium

Series: AL-2R

AL-2R 2 Flute Corner Radius End Mill for Aluminium

  • Newly developed geometry
  • New KMD401 diamond like coating for significantly improved tool life
  • Wide range of radii available on larger diameters
Starting From:
£44.68 excl. VAT
£53.62 incl. VAT

Image of product.

ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel

Series: HM-4BL

ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£41.61 excl. VAT
£49.93 incl. VAT

ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank

ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel

Series: HM-4B

ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£35.54 excl. VAT
£42.65 incl. VAT

ZCC-CT 4 Flute CrN Coated Aluminium End Mill

4 Flute CrN Coated Carbide Aluminium End Mill

Series: NM-4E

4 Flute CrN Coated Carbide Aluminium End Mill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 1mm-12mm 
Starting From:
£15.91 excl. VAT
£19.09 incl. VAT