Carbide End Mills Milling Cutters Milling Tools

FRANKEN Top-Cut 4 Flute Short Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

MasterMill VX6 174329 Series 6 Flute High Performance End Mill

• Solid micrograin carbide
• Optimised for high speed and trochoidal milling
• Chamfered for corner protection
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

ZCC-CT UM-4EL Series 4 Flute Long Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill

• Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
• Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
• End mills and torus Mills.
• HSC/HPC machining.
• AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.

MasterMill VX5 172323 Series 5 Flute High Performance End Mill

• Solid micrograin carbide
• Chamfered for corner protection
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials
• High rigidity of flute for heavy profiling and high speed machining
• Reinforced cutting edge

FRANKEN Top-Cut 3 Flute High Performance Short Length End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill

• Solid micrograin carbide
• Variable helix geometry
• ALTiN coated
• Sharp cutting edge designed for HRSA
• Smooth machining with minimal vibration
• One tool for roughing and finishing
• Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
• High metal removal rates

FRANKEN Top-Cut Long Length High Performance End Mill 3XD

• Solid micrograin carbide
• TiALN coated 
•  Long Series (3XD) 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill With Through Coolant

• Solid micrograin carbide 
• Variable helix geometry
• ALTiN coated
• Through coolant
• Sharp cutting edge designed for HRSA
• Smooth machining with minimal vibration
• One tool for roughing and finishing
• Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
• High metal removal rates

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• GLT coated for improved tool life works in copper alloys in addition to aluminium
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Alu-XP 126103 2 Flute Long Weldon Rougher for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Exellent surface finishes.

• superior chip removal.

• Corner protected

MasterMill VX5 174323 Series 5 Flute High Performance Corner Radius End Mill

• Solid micrograin carbide
• Corner radius
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials
• High rigidity of flute for heavy profiling and high speed machining
• Reinforced cutting edge

MasterMill VX5 173323 Series 5 Flute High Performance Short Corner Radius End Mill

• Solid micrograin carbide
• Short design
• Corner radius
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials
• High rigidity of flute for heavy profiling and high speed machining
• Reinforced cutting edge

Alu-XP 126303 2 Flute Long Roughing End Mill for Aluminium

• Excellent surface finishes.

• Superior chip removal.

• Reinforced cutting edge.

• Corner protected.

• Mirror polished" flutes.

4 Flute CrN Coated Carbide Aluminium End Mill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 1mm-12mm 

Alu-XP 125103 3 Flute Long Roughing End Mill for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Exellent surface finishes

• Superior chip removal.

• Corner protected.