Milling Tools

MasterMill VX6 175329 Series 6 Flute High Performance Long Length End Mill

• Solid micrograin carbide
• Long design
• Optimised for high speed and trochoidal milling
• Corner radius
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials

ZCC-CT ZOHX-GF-YBG252 indexable milling inserts for use with the ZCC-CT BMR04 and QCH-ZOHX indexable face milling bodies.

Max-Mill Coated Carbide 2 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill

• Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
• Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
• End mills and torus Mills.
• HSC/HPC machining.
• AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.

ZCC-CT HM-4EFP 4 Flute Reduced Neck End Mill with Straight Shank For Hardened Steels

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

FRANKEN Top-Cut 4 Flute Short Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Pulsar Blue 3 Flute Ball Nose End Mill for Hardened Steel

• Premium nanograin carbide
• Suitable for dry cutting
• Suitable for machining upto 70HRC
• High speed cutting
• 30 degree helix
• Excellent workpiece finish

MasterMill VX6 174329 Series 6 Flute High Performance End Mill

• Solid micrograin carbide
• Optimised for high speed and trochoidal milling
• Chamfered for corner protection
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials

Pulsar Blue 4 Flute High Feed Long Length Corner Radius End Mill for Hardened Steel

• Premium nanograin carbide
• Suitable for dry cutting
• Suitable for machining upto 70HRC
• Corner radius
• High speed cutting
• High feed geometry
• Short flute for maximum strength

CLARKSON TiALN HSS Co8 2 Flute Short Length Slot Drill

• HSS 8% coablt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

ALU-XP 2 Flute Short Length Slot Drill for Aluminium

• Suitable for machining of aluminium and other non-ferrous materials.

• Excellent surface finishes, superior chip removal.

• Corner protected.

• Mirror polished flutes.

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

Clarkson 6 Flute HSS Threaded Shank Long Length End Mill

• Used for profile milling and producing open slots.

• Bright finish.

• Flute type: 30° helix.

• Manufactured to BS 12

2 Flute Corner Radius Long Length End Mill for Aluminium

• Newly developed geometry
• New KMD401 diamond like coating for significantly improved tool life
• Wide range of radii available on larger diameters

• Diameter range Ø21 – 60 mm
• For cast iron
• Groove widths 9, 11, 14, 18, 22, 28 mm

2 Flute CrN Coated Carbide Aluminium Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 1mm-12mm 

ZCC-CT RCKT-DM-YBC301 indexable milling inserts for use with the ZCC-CT FMR01 and FMR02 indexable face milling bodies.

Franken Alu-Cut solid carbide 3 flute long length end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

Features:

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Several corner radii per cutting diameter
• Suitable for z-axis milling
• Suitable for roughing and finishing
• Low-vibration machining

ZCC-CT UM-4EL Series 4 Flute Long Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill

• Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
• Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
• End mills and torus Mills.
• HSC/HPC machining.
• AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.

• Diameter range Ø16–40 mm
• For steel, stainless steel, cast iron, nonferrous metals and heat-resistant alloys
• For square-shoulder, slot and plunge milling
• Milling cutter with positive, soft cutting geometry
• Inserts with two cutting edges
• For metric ISO threads according to DIN standard only

• Diameter range Ø40 – 125 mm
• Sharp cutting edge geometry combined with robust tangential inserts
• First choice for large cutting depths with high feed rates.
• Specially designed cutting edge with high precision control for high quality 90 degree square shoulder milling