Milling Tools
APKT Insert For Machining Steel & Stainless Steel YBM253 (ZCC-CT)
Series: APKT-PM YBM253
ZCC-CT APKT-PM-YBM253 indexable milling inserts for use with the ZCC-CT EMP01, EMP02, EMP03, HMP01 and QCH-APKT indexable face milling bodies.
Starting From:
£6.05 excl. VAT
£7.26 incl. VAT
£6.05 excl. VAT
£7.26 incl. VAT
SPMT Insert For Machining Steel & Stainless Steel YBM253 (ZCC-CT)
Series: SPMT-PM YBM253
Starting From:
£5.19 excl. VAT
£6.23 incl. VAT
£5.19 excl. VAT
£6.23 incl. VAT
PNEG Insert For Machining Cast iron YBD152 (ZCC-CT)
Series: PNEG-CR YBD152
Starting From:
£13.25 excl. VAT
£15.90 incl. VAT
£13.25 excl. VAT
£15.90 incl. VAT
Powder Metal 2 Flute End Mill Weldon Shank
Series: 101140
- Sabre coating for increased wear resistance at high speeds.
- Designed for steels, stainless steels and cast iron.
- Suitable for use on difficult to cut materials
Starting From:
£23.54 excl. VAT
£28.25 incl. VAT
£23.54 excl. VAT
£28.25 incl. VAT
4 FLUTE POWDER METAL END MILL LONG SERIES
Series: 108140
- Powder Metal
- Sabre coating for increased wear resistance at high speeds.
- Designed for steels, stainless steels and cast iron.
- Suitable for use on difficult to cut materials
Starting From:
£14.53 excl. VAT
£17.44 incl. VAT
£14.53 excl. VAT
£17.44 incl. VAT
2 Flute Long Series carbide Slot Drill for Aluminium (STARKE Ali-Mill)
Series: AL452
- Suitable for machining of aluminium and other non-ferrous materials.
- Mirror polished fl utes
- Excellent surface finishes, superior chip removal.
- Micrograin carbide
- Hi-helix geometry
- Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
Ali-Mill 3 Flute Long Series carbide Slot Drill for Aluminium (STARKE AL453)
Series: AL453
- Suitable for machining aluminium and other non-ferrous materials
- Mirror polishied flutes
- Excellent surface finishe and superior chip removal
- Micrograin carbide
- Hi-helix geometry
- Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
Ali-Mill 2 Flute Ball Nosed Solid Carbide for Aluminium
Series: AB382
- Solid micrograin carbide
- 38 degree helix geometry enable better chip removal
- Polished flutes for superior surface finish
- 2 flutes
4 Flute Coated Carbide Long Series General Purpose End Mill (STARKE Eco-Mill)
Series: EL454
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
ZCC-CT Coated Carbide 2 Flute Slot Drills Long Length
Series: PM2EL
- For Machining Up To 55HRC
- Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
- Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
- Diameter Range 3mm - 20mm
- Solid Micrograin Carbide
- PVD Coated Substrate
Starting From:
£16.67 excl. VAT
£20.00 incl. VAT
£16.67 excl. VAT
£20.00 incl. VAT
ZCC-CT Coated Carbide 4 Flute End Mills Long Length
Series: PM4EL
- For Machining Up To 55HRC
- Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
- Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
- Diameter Range 3mm - 20mm
- Solid Micrograin Carbide
- PVD Coated Substrate
Starting From:
£17.06 excl. VAT
£20.47 incl. VAT
£17.06 excl. VAT
£20.47 incl. VAT