Milling Tools

ZCC-CT WPGT-YBM351 indexable milling inserts for use with the ZCC-CT XMR01-WPGT (end mill), XMR01-WPGT (shell mill) and QCH-WPGT ndexable face milling bodies.

ZCC-CT WPGT-YBC302 indexable milling inserts for use with the ZCC-CT XMR01-WPGT - end mill, XMR01-WPGT - shell mill and QCH-WPGT indexable face milling bodies.

Powder Metal 2 Flute Slot Drill Weldon Shank (Europa) 

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials.

Powder Metal 2 Flute End Mill Weldon Shank (Europa) 

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials

• For Machining Up To 55HRC
• Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
• Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
• Diameter Range 3mm - 20mm 
• Solid Micrograin Carbide
• PVD Coated Substrate

• For Machining Up To 55HRC
• Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
• Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
• Diameter Range 3mm - 20mm 
• Solid Micrograin Carbide
• PVD Coated Substrate

Powder Metal 2 Flute Short Length Ball Nosed Slot Drill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials.

Powder Metal 2 Flute Standard Length Ball Nose Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials.

Powder Metal 3 Flute End Mill Short Length (Europa) 

• Sabre coating for increased wear resistance at highspeeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials.

Powder Metal 3 Flute Standard Length End Mill Weldon Shank (Europa) 

• Sabre coating for increased wear resistance at highspeeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials.

Powder Metal 4 Flute Standard Length End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials. 

Powder Metal Flute Short Length Fine Pitch End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Fine pitch

Powder Metal Long Length Fine Pitch End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Fine pitch 

Powder Metal Extended Neck Fine Pitch End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Fine pitch 

Powder Metal Short Length Coarse Pitch End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Coarse pitch 

Powder Metal Extended Neck Coarse Pitch Ripper (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Coarse pitch  

45 Degree Indexable Milling Set Supplied With SNMX 8 Edged Inserts (Europa)

• For steel, stainless steel, heat-resistant alloys, hardened steel and cast iron
• Inserts with 8 cutting edges
• Double sided, thicker inserts for high stability and deeper cutting depths 
• Supplied with ET612 grade inserts, excellent versatility across a range of materials 

True 90 Degree Face Mill Indexable Milling Set Supplied With WNEX 6 Edged Inserts (Europa)

• Supplied with ET612 grade inserts, excellent versatility across a range of materials

• Negative geometry with a positive cutting action
• Excellent swarf evacuation for cleaner cuts
• High positive rake angle
• 08 insert size with unique chip groove
• Precise pocket contact ensures a robust, stable and secure insert fit

• Optimised chipcurl and minimised burr
• Suitable for a wide range of applications
• Stronger milling bodies than standard tools
• Superior surface finish due to the wide wiper edge
• Low cutting force with smooth cutting action
• Double sided insert reducing cost per edge 

True 90 Degree Face Mill Indexable Set Supplied With TPKT Inserts (Europa)

• Supplied with ET612 grade inserts, excellent versatility across a range of materials

• True 90º cutting edge
• High process security
• Larger core diameter with optimal insert placement

• Cost effective machining
• Stronger milling bodies than standard tools
• Low cutting force with smooth cutting action