Aluminium & Non-Ferrous Milling Cutters Milling Tools
CLARKSON HSS 1 Flute End Mill for Aluminium
CLARKSON HSS 1 Flute End Mill for Aluminium
- HSS
- Uncoated
- Suitable for aluminium and non-ferrous material
£8.15 excl. VAT
£9.78 incl. VAT
CLARKSON HSS TiALN Coated 1 Flute End Mill for Aluminium
CLARKSON HSS TiALN coated 1 Flute End Mill for Aluminium
- HSS
- Uncoated
- Suitable for aluminium and non-ferrous material
£13.88 excl. VAT
£16.66 incl. VAT
2 Flute CrN Coated Carbide Aluminium Slot Drill
2 Flute CrN Coated Carbide Aluminium Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£14.38 excl. VAT
£17.26 incl. VAT
AL-2R 2 Flute Corner Radius End Mill for Aluminium
AL-2R 2 Flute Corner Radius End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£43.38 excl. VAT
£52.06 incl. VAT
Alu-XP 142303 Series 3 Flute Carbide Corner Radius End Mill for Aluminium & Non-Ferrous Machining
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£12.63 excl. VAT
£15.16 incl. VAT
ALU-XP 155303 2 Flute Extended Neck 30 Degree Helix Corner Radius End Mill for Aluminium
£20.29 excl. VAT
£24.35 incl. VAT
Alu-XP 156303 Series 2 Flute Carbide Corner Radius Reduced Neck End Mill for Aluminium & Non-Ferrous Machining
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£39.85 excl. VAT
£47.82 incl. VAT
Alu-XP 125103 Series 3 Flute Long Length Roughing End Mill for Machining Aluminium
£23.86 excl. VAT
£28.63 incl. VAT
Alu-XP 126103 Series 2 Flute 45 Degree Helix Long Length Weldon Shank Roughing End Mill for Machining Aluminium
£36.90 excl. VAT
£44.28 incl. VAT
Alu-XP 126303 Series 2 Flute 45 Degree Helix Long Length Plain Shank Roughing End Mill for Machining Aluminium
£36.90 excl. VAT
£44.28 incl. VAT
FRANKEN 3 Flute Carbide Ripper For Aluminium
Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
- High performance tool.
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Plain Shank
£49.67 excl. VAT
£59.60 incl. VAT
FRANKEN 3 Flute Coated Carbide Ripper for Aluminium
Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
- High performance tool.
- GLT coated for improved tool life works in copper alloys in addition to aluminium
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Plain Shank
£59.24 excl. VAT
£71.09 incl. VAT
Franken 3 Flute Carbide Corner Radius End Mill for Aluminium
Franken Alu-Cut solid carbide 3 flute end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
Features:
- High performance tool.
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Several corner radii per cutting diameter
- Suitable for z-axis milling
- Suitable for roughing and finishing
- Low-vibration machining
£31.07 excl. VAT
£37.28 incl. VAT
FRANKEN 3 Flute Long Length Corner Radius For Aluminium
Franken Alu-Cut solid carbide 3 flute long length end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
Features:
- High performance tool.
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Several corner radii per cutting diameter
- Suitable for z-axis milling
- Suitable for roughing and finishing
- Low-vibration machining
£40.95 excl. VAT
£49.14 incl. VAT
Clarkson 2 Flute HSS Co8 Extra-Long Length Slot Drill
Clarkson 2 Flute HSS Co8 Extra-Long Length Slot Drill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£17.65 excl. VAT
£21.18 incl. VAT
Clarkson 4-6 Flute HSS Co8 Short Length End Mill
Clarkson 4-6 Flute HSS Co8 (Cobalt) Short Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£6.35 excl. VAT
£7.62 incl. VAT
Clarkson 4-6 Flute HSS Co8 Long Length End Mill
Clarkson 4-6 Flute HSS Co8 Long Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£9.05 excl. VAT
£10.86 incl. VAT
CLARKSON TiALN HSS Co8 2 Flute Short Length Slot Drill
CLARKSON TiALN HSS Co8 2 Flute Short Length Slot Drill
- HSS 8% coablt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£8.89 excl. VAT
£10.67 incl. VAT
CLARKSON HSS Co8 3 Flute 37 Degree Helix Coarse Pitch Short Length Roughing End Mill
CLARKSON HSS CO8 TiALN coated 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for aluminium and non-ferrous materials
£35.92 excl. VAT
£43.10 incl. VAT
Clarkson 4 Flute HSS Co8 TiAlN Coated Long Length End Mill
Clarkson 4 Flute HSS Co8 TiAlN Coated Long Length End Mill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£44.08 excl. VAT
£52.90 incl. VAT
CLARKSON HSS Co8 4 Flute Long Length Ball Nose End Mill
CLARKSON HSS Co8 4 Flute Long Length Ball Nose End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£33.92 excl. VAT
£40.70 incl. VAT
CLARKSON TiALN HSS Co8 4 Flute Ball Nose End Mill
CLARKSON TiALN HSS Co8 4 Flute Ball Nose End Mill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£17.51 excl. VAT
£21.01 incl. VAT
ALU-XP 113202 2 Flute Extended Neck 50 Degree Helix Ball Nose Milling Cutter for Aluminium
£20.79 excl. VAT
£24.95 incl. VAT
CLARKSON TiALN HSS Co8 2 Flute Ball Nose Slot Drill
CLARKSON TiALN HSS Co8 2 Flute Ball Nose Slot Drill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£15.19 excl. VAT
£18.23 incl. VAT