Long End Mills

• Micrograin Carbide
• TIALN coated to machine up to 45 HRC
• Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
• Centre cutting
• Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm

• Suitable for machining aluminium and other non-ferrous materials
• Mirror polishied flutes
• Excellent surface finishe and superior chip removal
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

FRANKEN 4 Flute Long Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

FRANKEN Top-Cut 3 Flute High Performance Long Length End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

FRANKEN Extra Long Length High Performance End Mill 4XD

• Solid micrograin carbide
• TiALN coated 
• Extra long (4XD) 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Clarkson HSS Co8 Long Length Threaded Shank End Mill

• HSS 8% cobalt
• 4-8 flutes
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

CLARKSON TiALN Coated HSS Co8 Multi Flute Long Length Fine Pitch Ripper

• HSS 8% cobalt
• Fine pitch
• TiALN coated
• Weldon (flatted) shank
• Suitable for a wide range of materials

ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

Alu-XP 3 Flute Long Length Weldon Shank Ripper

• Excellent surface finishes.
• Superior chip removal.
• Flatted shank.
• Micrograin solid carbide substrate.
• Corner protected.

Clarkson 4-6 Flute HSS Co8 Long Length End Mill

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

Clarkson 6 Flute HSS Threaded Shank Long Length End Mill

• Used for profile milling and producing open slots.

• Bright finish.

• Flute type: 30° helix.

• Manufactured to BS 12

ZCC-CT UM-4EL Series 4 Flute Long Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill

• Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
• Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
• End mills and torus Mills.
• HSC/HPC machining.
• AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.

Clarkson 4-6 Flute HSS Co8 TiAlN Coated Long Length End Mill

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

CLARKSON HSS Co8 TiAlN Coated 3 Flute Long Length End Mill

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill 

• HSS 8% cobalt
• Uncoated 
• Weldon shank
• Suitable for a wide range of materials

FRANKEN Top-Cut Long Length High Performance End Mill 3XD

• Solid micrograin carbide
• TiALN coated 
•  Long Series (3XD) 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Alu-XP 126103 2 Flute Long Weldon Rougher for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Exellent surface finishes.

• superior chip removal.

• Corner protected

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• GLT coated for improved tool life works in copper alloys in addition to aluminium
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Alu-XP 126303 2 Flute Long Roughing End Mill for Aluminium

• Excellent surface finishes.

• Superior chip removal.

• Reinforced cutting edge.

• Corner protected.

• Mirror polished" flutes.

CLARKSON Series HSS Co8 3 Flute Long Length Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Powder Metal 4 Flute Long Length End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials

Alu-XP 125103 3 Flute Long Roughing End Mill for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Exellent surface finishes

• Superior chip removal.

• Corner protected.

• For Machining Up To 55HRC
• Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
• Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
• Diameter Range 3mm - 20mm 
• Solid Micrograin Carbide
• PVD Coated Substrate