Expert advice available from time served engineers.
Click to view our current special offers.
We offer free carriage on all orders over £39 to mainland UK.
Click to view our current special offers.
Chat with us either by phone, online or email.
Click to view our current special offers.

Milling Cutters

Image of an E454 series 4 flute end mill milling cutter.

Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters

Series: E454

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 25mm
Image indicating the E454 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E454 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE

Image of a JELF series 4 flute end mill milling cutter

Max-Mill TiAlN Coated Carbide 4 Flute Long Length Milling Cutters

Series: JELF**04
  • Solid Micrograin Carbide
  • TiALN coated
  • Suitable for machining upto 55HRC
  • Can be used for wet and dry cutting
  • Centre cutting
  • Available diameter sizes between 1mm and 20mm
Starting From:
£15.23 excl. VAT
£18.28 incl. VAT

Image of an E453 series 3 flute end mill milling cutter

Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters

Series: E453

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 20mm
Image indicating the E453 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E453 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE

STARKE Ali-Mill A453 Series 3 Flute 45 Degree Solid Carbide End Mill for Machining Aluminium.

Ali-Mill 3 Flute 45 Degree Carbide Milling Cutters for Aluminium

Series: A453

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

  • Polished flutes for superior surface finish.
  • The special Hi-Helix geometry enables better chip removal.
  • Micrograin carbide
Starting From:
£9.08 excl. VAT
£10.90 incl. VAT
Buy 2 Get 1 FREE

STARKE V55 Mill V554 Series 4 Flute High Performance Variable Helix Solid Carbide End Mill.

V55 4 Flute High Performance Variable Helix Milling Cutters

Series: V554

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

  • Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
  • Variable helix angle designed to rough and finish with 1 tool.
  • Chatter free design which allows for increased cutting depths and feed rates.
Starting From:
£16.73 excl. VAT
£20.08 incl. VAT
Buy 2 Get 1 FREE

Image of product.

V60 4 Flute High Performance Variable Helix Milling Cutters

Series: V604

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

  • Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
  • Variable helix angle designed to rough and finish with 1 tool.
  • Chatter free design which allows for increased cutting depths and feed rates.
  • Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
Starting From:
£17.57 excl. VAT
£21.08 incl. VAT
Buy 2 Get 1 FREE

Image of product.

HSC Series 2 Flute Tialn Coated HSS Milling Cutters

Series: HSC2
  • 2 flute HSSE slot drill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE

HSC Series 3 Flute Tialn Coated HSS Milling Cutters

Series: HSC3
  • 3 flute HSSE slot drill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE

HSCR Series Tialn Coated Fine Pitch Roughing HSS Milling Cutters

Series: HSCR
  • 3 & 4 flute HSSE end mill ripper
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£21.46 excl. VAT
£25.75 incl. VAT
Buy 2 Get 1 FREE

STARKE Ali-Mill A452 Series 2 Flute 45 Degree Solid Carbide End Mill for Machining Aluminium.

Ali-Mill 2 Flute 45 Degree Carbide Milling Cutters for Aluminium

Series: A452

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

  • Polished flutes for superior surface finish.
  • The special Hi-Helix geometry enables better chip removal.
  • Micrograin carbide
Starting From:
£9.08 excl. VAT
£10.90 incl. VAT
Buy 2 Get 1 FREE

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank

ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters

Series: HM-4E

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£15.68 excl. VAT
£18.82 incl. VAT
Offer Price From:
£13.33excl. VAT
£16.00incl. VAT
15% DISCOUNT

ZCC-CT UM-4E 4 Flute Standard Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill

ZCC-CT UM-4E Series 4 Flute Variable Helix Milling Cutters

Series: UM-4E

ZCC-CT UM-4E Series 4 Flute Standard Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill

  • Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
  • Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
  • End mills and torus Mills.
  • HSC/HPC machining.
  • AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
Starting From:
£15.19 excl. VAT
£18.23 incl. VAT

ALI-MAX Solid Carbide 3 Flute Long Length End Mill

Ali-Max 3 Flute Long Length Milling Cutters For Aluminium

Series: LAE**03

ALI-MAX Solid Carbide 3 Flute Long Length End Mill from Nano Mill.

  • 55 degree helix
  • Manufactured from ultra fine micrograin carbide
  • Sharp cutting edge for greater swarf evacuation
Starting From:
£17.32 excl. VAT
£20.78 incl. VAT

HSC Series 4 Flute Tialn Coated HSS Milling Cutters

Series: HSC4
  • 4 flute HSSE end mill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE

Max-Mill JE Series Coated Carbide 4 Flute Square End Mill

Max-Mill TIALN Coated Carbide 4 Flute Milling Cutters

Series: JE**04

Max-Mill Coated Carbide 4 Flute End Mill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£8.28 excl. VAT
£9.94 incl. VAT

STARKE ECO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill.

Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters

Series: EB452

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Available diameter sizes between 1mm and 20mm
Image indicating the EB452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the EB452 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE

Image of product.

ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters

Series: HM-2BP

ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£23.53 excl. VAT
£28.24 incl. VAT
Offer Price From:
£20.00excl. VAT
£24.00incl. VAT
15% DISCOUNT

Image of product.

PM75E Series High Performance Powder Metal 4 Flute Milling Cutters

Series: PM75E

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

  • Multiple helix technology for reduced vibration
  • Excellent performance in unstable machining conditions
  • Higher cutting speed than equivalent HSSCo tools
  • Reduced chatter
  • Improved tool harmonics
  • Exceptional performance in unstable cutting conditions
  • Increased chip flow
Starting From:
£9.05 excl. VAT
£10.86 incl. VAT

ALI-MAX Solid Carbide 2 Flute End Mill

Ali-Max 2 Flute Solid Carbide Milling Cutters for Machining Aluminium

Series: AE**02

ALI-MAX Solid Carbide 2 Flute Slot Drill from Nano-Mill 

  • 55 degree helix
  • Manufactured from ultra fine micrograin carbide
  • Sharp cutting edge for greater swarf evacuation
  • Ideal for aluminium and non-ferrous machining

 

 

Starting From:
£7.40 excl. VAT
£8.88 incl. VAT

ALI-MAX Solid Carbide 3 Flute End Mill

Ali-Max 3 Flute Solid Carbide Milling Cutters for Machining Aluminium

Series: AE**03

ALI-MAX Solid Carbide 3 Flute End Mill from Nano-Mill 

  • 55 degree helix
  • Manufactured from ultra fine micrograin carbide
  • Sharp cutting edge for greater swarf evacuation
  • Ideal for aluminium and non-ferrous machining
Starting From:
£8.23 excl. VAT
£9.88 incl. VAT

Image of product.

Alu-Cut 2544K Series 2 & 3 Flute Long Length Milling Cutters

Series: 2544K

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

  • Highest metal removal rates for stable milling processes
  • Several corner radii per diameter
  • Center cutting
  • GLT coated for improved tool life, works in copper alloys in addition to aluminum
  • Rough and finish with 1 tool
Starting From:
£38.73 excl. VAT
£46.48 incl. VAT

Clarkson PM75 Multiple Helix High Performance Powder Metal Fine Pitch Ripper

PM75S Series High Performance Powder Metal Fine Pitch Ripper

Series: PM75S

Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

  • Multiple helix technology for reduced vibration
  • Excellent performance in unstable machining conditions
  • Higher cutting speed than equivalent HSSCo tools
  • Reduced chatter
  • Improved tool harmonics
  • Exceptional performance in unstable cutting conditions
  • Increased chip flow
Starting From:
£19.01 excl. VAT
£22.81 incl. VAT

Max-Mill JB Series TiAlN Coated Carbide 4 Flute Ball Nose End Mill

Max-Mill 4 Flute Coated Carbide Ball Nose Milling Cutters

Series: JB**04

Max-Mill Coated Carbide 4 Flute Ball Nosed End Mill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£9.79 excl. VAT
£11.75 incl. VAT

Max-Mill JEF Series Coated Carbide 3 Flute Square End Mill

Max-Mill Series 3 Flute Coated Carbide Milling Cutters

Series: JEF**03

Max-Mill Coated Carbide 3 Flute End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£8.28 excl. VAT
£9.94 incl. VAT