STARKE Carbide & HSS Milling Cutters

STARKE Eco-Mill E454 4 flute TiALN coated carbide end mills for steel, stainless steel, cast iron and non-ferrous materials up to 45 HRC, in diameters from 1mm to 25mm.

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.

• Cut up to 45 HRC 

• Can be used wet or dry to increase tool life.

• Micrograin carbide

• Centre cutting

• Available diameter sizes between 1mm and 20mm

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.
• Replaces the V554 series. Now has an improved coating to machine to a higher HRC.

• 2 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

• 3 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

• 3 & 4 flute HSSE end mill ripper
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

ALI-MILL Solid Carbide 2 Flute 45 Degree Slot Drill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.

• The special Hi-Helix geometry enables better chip removal.

• Micrograin carbide

• 4 flute HSSE end mill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 1mm and 20mm

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm to 20mm

• Cut up to 55 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 6mm and 20mm

• Suitable for machining of aluminium and other non-ferrous materials.
• Mirror polished fl utes
• Excellent surface finishes, superior chip removal.
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

• Suitable for machining aluminium and other non-ferrous materials
• Mirror polishied flutes
• Excellent surface finishe and superior chip removal
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

• Solid micrograin carbide
• 38 degree helix geometry enable better chip removal
• Polished flutes for superior surface finish
• 2 flutes

• Micrograin Carbide
• TIALN coated to machine up to 45 HRC
• Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
• Centre cutting
• Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm