Emuge-Franken

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• GLT1 is a Multi layered coating which has a hard smooth surface
• Tremendous increase in tool life and superior swarf evacuation
• High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NT2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max 2 x d1

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• GLT1 is a Multi layered coating which has a hard smooth surface
• Tremendous increase in tool life and superior swarf evacuation
• High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 2 x d1

FRANKEN Top-Cut Extra Long Length High Performance Ball Nosed End Mill

• Solid micrograin carbide
• TiALN coated 
• Extra long  
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• GLT1 is a Multi layered coating which has a hard smooth surface
• Tremendous increase in tool life and superior swarf evacuation
• High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

FRANKEN Top-Cut High Performance Ball Nosed End Mill

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NE2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 2.5 x d1

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• GLT1 is a Multi layered coating which has a hard smooth surface
• Tremendous increase in tool life and superior swarf evacuation
• High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 2 x d1

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NT2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max 2 x d1

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• GLT1 is a Multi layered coating which has a hard smooth surface
• Tremendous increase in tool life and superior swarf evacuation
• High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

FRANKEN Top-Cut Long Length High Performance End Mill 3XD

• Solid micrograin carbide
• TiALN coated 
•  Long Series (3XD) 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• GLT coated for improved tool life works in copper alloys in addition to aluminium
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Franken Alu-Cut solid carbide 3 flute end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

Features:

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Several corner radii per cutting diameter
• Suitable for z-axis milling
• Suitable for roughing and finishing
• Low-vibration machining

Franken Alu-Cut solid carbide 3 flute long length end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

Features:

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Several corner radii per cutting diameter
• Suitable for z-axis milling
• Suitable for roughing and finishing
• Low-vibration machining

For the machining of internal threads

• Smooth milling thanks to flutes with 15° helix angle
• Pre-drilled taphole necessary
• Tool for a specific dimension with corrected thread profile
• Through coolant hole
• Metric coarse
• TiALN T4 coated

For the machining of internal threads

• Smooth milling thanks to flutes with 15° helix angle
• Pre-drilled taphole necessary
• Tool for a specific dimension with corrected thread profile
• Through coolant hole
• Metric fine
• TiALN T4 coated

For the machining of countersink chamfer or internal threads

• Smooth milling thanks to flutes with 15° helix angle
• Pre-drilled taphole necessary
• Tool for a specific dimension with corrected thread profile
• Through coolant hole
• Metric coarse
• TiALN T4 coated
• 30 degree countersinking step

For the machining of countersink chamfer or internal threads

• Smooth milling thanks to flutes with 15° helix angle
• Pre-drilled taphole necessary
• Tool for a specific dimension with corrected thread profile
• Through coolant hole
• Metric fine
• TiALN T4 coated
• 30 degree countersinking step

For the machining of countersink chamfer or internal threads

• Smooth milling thanks to flutes with 15° helix angle
• Pre-drilled taphole necessary
• Tool for a specific dimension with corrected thread profile
• Through coolant hole
• UNC
• TiALN T4 coated
• 30 degree countersinking step

For the machining of countersink chamfer or internal threads

• Smooth milling thanks to flutes with 15° helix angle
• Pre-drilled taphole necessary
• Tool for a specific dimension with corrected thread profile
• Through coolant hole
• UNF
• TiALN T4 coated
• 30 degree countersinking step

For the machining of internal threads

• Smooth milling thanks to flutes with 15° helix angle
• Pre-drilled taphole necessary
• Tool for a specific dimension with corrected thread profile
• Through coolant hole
• Whitworth
• TiALN T4 coated

• Machining tapered internal thread
• Smooth milling thanks to flutes with 15° helix angle
• deep threads possible thanks to long thread part
• Partly for several dimensions
• cylindrical or better tapered pre-drilled tap hole necessary
• tool for a specific pitch with corrected thread profile

Solid carbide circular thread mill

• For machining of internal thread
• 2XD
• From thread size M1
• Pre-drilled taphole necessary
• Tool for several dimensions with corrected thread profile
• Partly independant of pitch