Special Offers

ER40 Coolant Sealed Collet Set with Max 15 Micron Runout - 19 piece standard precision ER collets : 3mm - 25mm in plasctic case.

ER25 Tapping with square <10 micron runout collets, available in diameters from 3.50mm to 16.00mm. The Tapping with square, high accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of high precision machining applications.

ER20 standard 5 micron runout collets available in diameters from 1mm - 16mm. Standard type, ultra high accuracy ER collets

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.

ER40 standard type collet set with max 15 micron runout - 23 piece standard precision ER collets : 4mm - 26mm in 1mm increments.

ER32 Tapping with Square Collets with Max 10 Micron Runout

Features:

• • All collets 100% run out checked.
• • Hardened to prevent breakage from small shocks.
• • Tapping with square and high precision (<10 micron runout).
• • No deformity when clamping to the minimum diameter
•  Friendly to your toolholder in terms of their smooth surface free of sharp edges and their exact angle geometry to suit the chuck taper and its clamping nut.

ER11 standard type collet set with max 5 micron runout - 13 piece ultra high precision ER collets : 1mm - 7mm in 0.5mm increments.

ER50 standard type collet set with max 15 micron runout - 12 piece standard precision ER collets : 12mm - 34mm in 2mm increments.

ER25 standard type collet set with max 5 micron runout - 15 piece ultra high precision ER collets : 2mm - 16mm in 1mm increments.

ER16 Tapping with Square Collet Set with Max 10 Micron Runout - 10 piece high precision ER collet set : 2.8mm - 8mm diameter.

ER25 coolant sealed <15 micron runout collets, available in diameters from 3.00mm to 16.00mm. The coolant sealed, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.

ER20 Tapping with square <10 micron runout collets, available in diameters from 3.50mm to 12.00mm. The Tapping with square, high accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of high precision machining applications.

ER40 standard <5 micron runout collets available in diameters from 2.00mm - 32.00mm. Standard type, ultra high accuracy ER collets

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

• Highest metal removal rates for stable milling processes
• Several corner radii per diameter
• Center cutting
• Uncoated
• Available with high performance GLT coating works in copper alloys in addition to aluminum
• Rough and finish with 1 tool

ER32 standard type collet set with max 10 micron runout - 18 piece high precision ER collets : 3mm - 20mm in 1mm increments.

Through Coolant type pull studs (with through coolant) for use with all DIN2080 (ISO30 / ISO40 / ISO50) spindle tooling systems

ER20 standard <15 micron runout collets, available in diameters from 1.00mm - 13.00mm. Standard type, standard accuracy ER collets

ER11 standard type collet set with max 15 micron runout - 13 piece standard precision ER collets : 1mm - 7mm in 0.5mm increments.

ER40 standard type <15 micron runout collets, available in diameters from 1mm to 32mm. The standard type, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.

ER16 coolant sealed <15 micron runout collets, available in diameters from 3.00mm to 10.00mm. The coolant sealed, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.

ER32 Coolant Sealed Collet Set with Max 5 Micron Runout - 18 piece ultra high precision ER collets : 3mm - 20mm in 1mm increments.

ER16 Tapping with square <10 micron runout collets, available in diameters from 2.80mm to 8.00mm. The Tapping with square, high accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of high precision machining applications.

ER25 standard type collet set with max 10 micron runout - 15 piece high precision ER collets : 2mm - 16mm in 1mm increments.

ER32 standard <10 micron runout collets, available in diameters from 1mm - 20mm. Standard type, high accuracy ER collets