Special Offers

ER16 standard type collet set with max 10 micron runout - 10 piece high precision ER collets : 1mm - 10mm in 1mm increments.

ER20 coolant sealed <15 micron runout collets, available in diameters from 3.00mm to 13.00mm. The coolant sealed, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.

ER20 standard <10 micron runout collets, available in diameters from 1.00mm - 13.00mm. Standard type, high accuracy ER collets

ER40 Tapping with square <10 micron runout collets, available in diameters from 3.50mm to 20.00mm. The Tapping with square, high accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of high precision machining applications.

ER25 standard 10 micron runout collets, available in diameters from 1mm - 20mm. Standard type, high accuracy ER collets

Emuge Franken solid carbide circular drill thread mill

• Drill, thread mill and chamfer with 1 tool
• Speed up cycle times and reduce tooling cost with 1 tool
• Suitable for steel, stainless steel, cast iron, heat resistant super alloys and non-ferrous materials
• 2xD
• Metric thread

ER40 coolant sealed <5 micron runout collets, in diameters from 3.00mm - 26.00mm. Coolant sealed, ultra high accuracy ER collets

Emuge Franken solid carbide circular drill thread mill

• Drill, thread mill and chamfer with 1 tool
• Speed up cycle times and reduce tooling cost with 1 tool
• Suitable for steel, stainless steel, cast iron, heat resistant super alloys and non-ferrous materials
• 2xD
• UNC thread

Emuge Franken solid carbide circular drill thread mill

• Drill, thread mill and chamfer with 1 tool
• Speed up cycle times and reduce tooling cost with 1 tool
• Suitable for steel, stainless steel, cast iron, heat resistant super alloys and non-ferrous materials
• 2xD
• UNF thread

ER40 coolant sealed <15 micron runout collets, available in diameters from 3.00mm to 26.00mm. The coolant sealed, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.

ER08 standard <10 micron runout collets, available in diameters from 1.00mm - 5.00mm. Standard type, high accuracy ER collets

ER11 standard <10 micron runout collets, available in diameters from 1.00mm - 8.0mm. Standard type, high accuracy ER collets

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NE2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 2.5 x d1

The Tuscan Single Station Vices are designed to withstand the pressure and force of CNC machining. With a built in anti-lift mechanism the vice ensures accurate and repeatable machining down to microns.

• 100mm, 150mm and 200mm jaw width options available
• Matched bed heights for multiple vice use
• Manufactured from FCD-60 ductile iron
• Machined key ways and alignment rail for quick set ups
• Built-in anti jaw lift mechanism

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NT2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium 

• Excellent surface finishes.
• Superior chip removal
• Micrograin solid carbide substrate
• Mirror polished Flutes
• Suitable for high speed machining of aluminium and other non-ferrous materials
• Corner protected.
• Long series

FRANKEN 4 Flute Long Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

• Manufactured from stabilised and hardened alloy steel 
• Supplied with wrench, tenons and hold down lugs
• Vice can be set on a swivel base as an optional extra
• Matched bed heights for multiple vice use
• Parallelism of bed vice to base 0.02/100mm
• Available between 100mm and 200mm jaw width

1 Flute ALU-XP Slot Drill for Machining Aluminium and Non-Ferrous Materials. Micro Grain Carbide End Mill with High Helix Geometry for Excellent surface finishes and Superior Chip Removal.

• Made in the UK by certified ISO9001 company
• Machined all over with chamfered edges
• Ground serration
• Grade 080 M15 capable of being heat treated

FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Corner radius
• Several coerner radii per cutting diameter  
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

ER20 Coolant Sealed Collet Set with Max 5 Micron Runout - 11 piece ultra high precision ER collets : 3mm - 13mm in 1mm increments.