ZCC-CT
PDJNR/L 93 Deg. Lever Lock Turning Tool Holder (DN**)
- Lever Clamp System
- Suitable for DN** Style Inserts
- 93 Degree Approach
£41.88 excl. VAT
£50.26 incl. VAT
£25.93excl. VAT
£31.12incl. VAT
SCLCR/L 95 Deg. Screw Clamp Turning Tool Holder (CC**)
- Screw Clamp System
- Suitable for CC** Style Inserts
- 95 Degree Approach
£26.64 excl. VAT
£31.97 incl. VAT
£9.72excl. VAT
£11.66incl. VAT
PWLNR/L 95 Deg. Lever Lock Turning Tool Holder (WN**)
- Lever Clamp System
- Suitable for WN** Style Inserts
- 95 Degree Approach
£41.88 excl. VAT
£50.26 incl. VAT
£10.34excl. VAT
£12.41incl. VAT
LNKT Insert For Machining Steel YBM253 (ZCC-CT)
ZCC-CT LNKT-GM-YBM253 indexable milling inserts for use with the ZCC-CT FMD03, FME04, FMP03 and EMP09 indexable face milling bodies.
£6.13 excl. VAT
£7.36 incl. VAT
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£19.12 excl. VAT
£22.94 incl. VAT
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£21.75 excl. VAT
£26.10 incl. VAT
ZCC-CT Coated Profiling Insert
- Coated Carbide Grooving Inserts
- Full Radius Geometry
- Suitable For ZCC-CT Gooving Tools
- Wide Range Of Material Specific Grades Available
- Double Edged
£9.70 excl. VAT
£11.64 incl. VAT
ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
APKT Insert For Machining Stainless & HRSA YB9320 (ZCC-CT)
APKT-APM carbide milling insert
- Grade YB9320 is our best performing insert for general purpose milling including heat resistant alloys
- CVD coated
- APM chipbreaker is designed for medium machining
- APKT geometry insert
£5.48 excl. VAT
£6.58 incl. VAT
APKT Insert For Machining Steel YBM253 (ZCC-CT)
APKT-APM carbide milling insert
- Grade YBM253 is our best performing insert for milling stainless steel
- CVD coated
- APM chipbreaker is designed for medium machining
- APKT geometry insert
£6.67 excl. VAT
£8.00 incl. VAT
APKT Insert For Machining Cast iron YBD152 (ZCC-CT)
APKT-APM carbide milling insert
- Grade YBD152 is our best performing insert for milling cast iron
- CVD coated
- APM chipbreaker is designed for medium machining
- APKT geometry insert
£6.67 excl. VAT
£8.00 incl. VAT
90° Indexable Face Mill for Insert Style APKT - ZCC-CT
- Diameter range Ø40–250 mm
- For steel, stainless steel, cast iron, nonferrous metals and heat-resistant alloys
- For square-shoulder, slot and plunge milling
- Milling cutter with positive, soft cutting geometry
- Inserts with two cutting edges
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck for Hardened Steel
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.56 excl. VAT
£25.87 incl. VAT
ANGX Insert For Machining Steel YBM253 (ZCC-CT)
ANGX-GM carbide milling insert
- Grade YBM253 is our best performing insert for milling stainless steel
- CVD coated
- GM chipbreaker is designed for medium machining
- ANGX geometry insert
£8.75 excl. VAT
£10.50 incl. VAT
XSEQ Insert For Machining Steel & Stainless Steel YBG302 (ZCC-CT)
£8.82 excl. VAT
£10.58 incl. VAT
CCMT Insert For Machining Steel YBC252 Grade (ZCC-CT)
CCMT-HM carbide turning insert
- Grade YBC252 is our best performing insert for turning steel
- CVD coated
- HM chipbreaker is designed for medium machining
- CCMT positive geometry
- 80° rhombic Insert
£3.54 excl. VAT
£4.25 incl. VAT
Indexable Slot Milling Shell for Insert Style XSEQ - ZCC-CT
- Diameter range Ø63 – 160 mm
- For steel, stainless steel and cast iron
- Groove widths 4, 5, 6, 7, 8 mm
£378.74 excl. VAT
£454.49 incl. VAT
CKJNR/L 93 Deg.Top Clamp Turning Tool Holder (KN**)
- Top Clamp System
- Suitable For KN**
- 93 Degree Approach
£57.75 excl. VAT
£69.30 incl. VAT
90° Indexable End Mill for Insert Style APKT - ZCC-CT
- Diameter range Ø12 – 63 mm
- For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
- For square shoulder milling, slot milling and ramping
- Milling cutter with positive, soft cutting geometry
- Inserts with two cutting edges
£51.83 excl. VAT
£62.20 incl. VAT
ZCC-CT 1588SL12C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 12xD Long Series
1588SL12C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 12xD long series
- Through coolant
£90.78 excl. VAT
£108.94 incl. VAT
ZSD05 5xD Indexable Drilling System
- Optimised edge design for stable operation with new chip breaker geometry
- Special grades for outer and inner insert for more efficiency by different materials
- Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
- Large chip pocket better for chip removal
- Optimised insert seat and clamping, Less vibration and longer tool life
£225.00 excl. VAT
£270.00 incl. VAT
ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
ZCC-CT 5501/5601 60 Degree Solid Carbide Deburring Cutter
Features:
- Micro grain carbide substrate.
- TiAlN Coated for longer tool life.
- Point angle: 60 degree
- Weldon shank
For machining steels, stainless steel and cast iron.
£12.92 excl. VAT
£15.50 incl. VAT
ZCC-CT CCMT-EM Carbide Turning Insert (YBG205 Grade)
£3.50 excl. VAT
£4.20 incl. VAT

.jpg&w=640&q=75)
.jpg&w=640&q=75)
.jpg&w=640&q=75)














.jpg&w=640&q=75)





