Milling Cutters ZCC-CT
ZCC-CT HM-6EL Series 6 Flute End Mill with Long Straight Shank for Hardened Steel Machining
ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£33.17 excl. VAT
£39.80 incl. VAT
2 Flute Corner Radius Long Length End Mill for Aluminium
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£50.22 excl. VAT
£60.26 incl. VAT
2 Flute CrN Coated Carbide Aluminium Slot Drill
2 Flute CrN Coated Carbide Aluminium Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£14.39 excl. VAT
£17.27 incl. VAT
ZCC-CT TM-4BP Series 4 Flute KMS405 Coated Carbide Ball Nose Reduced Neck End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£33.30 excl. VAT
£39.96 incl. VAT
£26.95excl. VAT
£32.34incl. VAT
ZCC-CT HM-4RP 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£26.25 excl. VAT
£31.50 incl. VAT
ZCC-CT HM-2E Series 2 Flute End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.11 excl. VAT
£22.93 incl. VAT
ZCC-CT TM-5R Series 5 Flute KMS405 Coated Carbide Corner Radius End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£30.32 excl. VAT
£36.38 incl. VAT
£24.55excl. VAT
£29.46incl. VAT
ZCC-CT TM-7R Series 7 Flute KMS405 Coated Carbide Corner Radius End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£98.59 excl. VAT
£118.31 incl. VAT
£79.81excl. VAT
£95.77incl. VAT
ZCC-CT TM-9R Series 9 Flute KMS405 Coated Carbide Corner Radius End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£560.70 excl. VAT
£672.84 incl. VAT
£441.29excl. VAT
£529.55incl. VAT
ZCC-CT TM-9RP Series 9 Flute KMS405 Coated Carbide Corner Radius Reduced Neck End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£749.17 excl. VAT
£899.00 incl. VAT
£589.62excl. VAT
£707.54incl. VAT
ZCC-CT TM-4BL Series 4 Flute KMS405 Coated Carbide Ball Nose Long Length End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£29.95 excl. VAT
£35.94 incl. VAT
£24.24excl. VAT
£29.09incl. VAT
ZCC-CT TM-4R Series 4 Flute KMS405 Coated Carbide Corner Radius End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£28.37 excl. VAT
£34.04 incl. VAT
£22.97excl. VAT
£27.56incl. VAT
ZCC-CT TM-7RP Series 7 Flute KMS405 Coated Carbide Corner Radius Reduced Neck End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£124.78 excl. VAT
£149.74 incl. VAT
£101.27excl. VAT
£121.52incl. VAT
ZCC-CT TM-5RP Series 5 Flute KMS405 Coated Carbide Corner Radius Reduced Neck End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£59.53 excl. VAT
£71.44 incl. VAT
£48.19excl. VAT
£57.83incl. VAT
ZCC-CT TM-4RP Series 4 Flute KMS405 Coated Carbide Corner Radius Reduced Neck End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£47.62 excl. VAT
£57.14 incl. VAT
£38.55excl. VAT
£46.26incl. VAT
ZCC-CT TM-5BP Series 5 Flute KMS405 Coated Carbide Ball Nose Reduced Neck End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£35.72 excl. VAT
£42.86 incl. VAT
£28.91excl. VAT
£34.69incl. VAT
ZCC-CT TM-5BL Series 5 Flute KMS405 Coated Carbide Ball Nose Long Length End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£32.28 excl. VAT
£38.74 incl. VAT
£26.13excl. VAT
£31.36incl. VAT
ZCC-CT TM-5B Series 5 Flute KMS405 Coated Carbide Ball Nose End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£30.32 excl. VAT
£36.38 incl. VAT
£24.55excl. VAT
£29.46incl. VAT
ZCC-CT TM-4B Series 4 Flute KMS405 Coated Carbide Ball Nose End Mill for Titanium & Heat-Resistant Alloy Machining
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£28.37 excl. VAT
£34.04 incl. VAT
£22.97excl. VAT
£27.56incl. VAT
AL-2R 2 Flute Corner Radius End Mill for Aluminium
AL-2R 2 Flute Corner Radius End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£44.68 excl. VAT
£53.62 incl. VAT
ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£41.61 excl. VAT
£49.93 incl. VAT
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£35.54 excl. VAT
£42.65 incl. VAT
4 Flute CrN Coated Carbide Aluminium End Mill
4 Flute CrN Coated Carbide Aluminium End Mill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£15.91 excl. VAT
£19.09 incl. VAT























