Filter by:
ZCC-CT HM Series End Mills for Machining Hardened Materials
ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters
Series: HM-4E
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£14.53 excl. VAT
£17.44 incl. VAT
£14.53 excl. VAT
£17.44 incl. VAT
ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters
Series: HM-2BP
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£21.79 excl. VAT
£26.15 incl. VAT
£21.79 excl. VAT
£26.15 incl. VAT
ZCC-CT HM-6E Series 6 Flute End Mill with Straight Shank for Hardened Steel Machining
Series: HM-6E
ZCC-CT HM-6E 6 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£26.10 excl. VAT
£31.32 incl. VAT
£26.10 excl. VAT
£31.32 incl. VAT
ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining
Series: HM-2BL
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£38.11 excl. VAT
£45.73 incl. VAT
£38.11 excl. VAT
£45.73 incl. VAT
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck for Hardened Steel
Series: HM-2EP
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£19.74 excl. VAT
£23.69 incl. VAT
£19.74 excl. VAT
£23.69 incl. VAT
ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel
Series: HM-4EL
ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£22.97 excl. VAT
£27.56 incl. VAT
£22.97 excl. VAT
£27.56 incl. VAT
ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel
Series: HM-4R
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£25.50 excl. VAT
£30.60 incl. VAT
£25.50 excl. VAT
£30.60 incl. VAT
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
Series: HM-4B
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£32.54 excl. VAT
£39.05 incl. VAT
£32.54 excl. VAT
£39.05 incl. VAT
ZCC-CT HM-2ES Series 2 Flute Micro Diameter End Mill with Straight Shank for Hardened Steel Machining
Series: HM-2ES
ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
- Starting at 0.3mm diameter
Starting From:
£12.31 excl. VAT
£14.77 incl. VAT
£12.31 excl. VAT
£14.77 incl. VAT
ZCC-CT HM-4RP 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel
Series: HM-4RP
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£26.25 excl. VAT
£31.50 incl. VAT
£26.25 excl. VAT
£31.50 incl. VAT
ZCC-CT HM-2E Series 2 Flute End Mill with Straight Shank for Hardened Steel Machining
Series: HM-2E
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£17.49 excl. VAT
£20.99 incl. VAT
£17.49 excl. VAT
£20.99 incl. VAT
ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining
Series: HM-2B
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel
Series: HM-4BL
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£38.11 excl. VAT
£45.73 incl. VAT
£38.11 excl. VAT
£45.73 incl. VAT
ZCC-CT HM-6EL Series 6 Flute End Mill with Long Straight Shank for Hardened Steel Machining
Series: HM-6EL
ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£29.81 excl. VAT
£35.77 incl. VAT
£29.81 excl. VAT
£35.77 incl. VAT
ZCC-CT HM-4EFP 4 Flute With Reduced Neck for Hardened Steel
Series: HM-4EFP
ZCC-CT HM-4EFP 4 Flute Reduced Neck End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£31.61 excl. VAT
£37.93 incl. VAT
£31.61 excl. VAT
£37.93 incl. VAT