Filter by:
Hardened Steel Milling Cutters Milling Tools
Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel
Series: 101950
Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
ZCC-CT HM-4RP 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel
Series: HM-4RP
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£26.25 excl. VAT
£31.50 incl. VAT
£26.25 excl. VAT
£31.50 incl. VAT
ZCC-CT HM-2E Series 2 Flute End Mill with Straight Shank for Hardened Steel Machining
Series: HM-2E
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£17.49 excl. VAT
£20.99 incl. VAT
£17.49 excl. VAT
£20.99 incl. VAT
Pulsar Blue 2 Flute Corner Radius Rib Processing End Mill for Hardened Steel
Series: 102350
Pulsar Blue 2 Flute Rib Processing Corner Radius Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel
Series: HM-4BL
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£38.11 excl. VAT
£45.73 incl. VAT
£38.11 excl. VAT
£45.73 incl. VAT
Pulsar Blue 4 Flute Corner Radius Extended Neck End Mill for Hardened Steel
Series: 101650
Pulsar Blue 4 Flute Extended Neck Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel
Series: 108350
Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
Series: HM-4B
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£32.54 excl. VAT
£39.05 incl. VAT
£32.54 excl. VAT
£39.05 incl. VAT
Pulsar Blue 2 Flute Corner Radius Rib Processing Slot Drill for Hardened Steel
Series: 101850
Pulsar Blue 2 Flute Rib Processing Corner Radius Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
ZCC-CT Coated Carbide 2 Flute Slot Drills Long Length
Series: PM2EL
- For Machining Up To 55HRC
- Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
- Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
- Diameter Range 3mm - 20mm
- Solid Micrograin Carbide
- PVD Coated Substrate
Starting From:
£19.74 excl. VAT
£23.69 incl. VAT
£19.74 excl. VAT
£23.69 incl. VAT
Offer Price From:
£16.45excl. VAT
£19.74incl. VAT
£16.45excl. VAT
£19.74incl. VAT
ZCC-CT Coated Carbide 4 Flute End Mills Long Length
Series: PM4EL
- For Machining Up To 55HRC
- Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
- Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
- Diameter Range 3mm - 20mm
- Solid Micrograin Carbide
- PVD Coated Substrate
Starting From:
£20.20 excl. VAT
£24.24 incl. VAT
£20.20 excl. VAT
£24.24 incl. VAT
Offer Price From:
£16.83excl. VAT
£20.20incl. VAT
£16.83excl. VAT
£20.20incl. VAT