Milling Cutters
Alu-XP 154303 Series 2 Flute Carbide Long Length End Mill for Aluminium & Non-Ferrous Machining
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£11.82 excl. VAT
£14.18 incl. VAT
Clarkson 2 Flute HSS Threaded Shank Long Length Slot Drill
Clarkson 2 Flute HSS Threaded Shank Long Length Slot Drill
- HSS
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£6.27 excl. VAT
£7.52 incl. VAT
ALU-XP 135303 -Single Flute Slot Drill for Machining Aluminium
1 Flute ALU-XP Slot Drill for Machining Aluminium and Non-Ferrous Materials. Micro Grain Carbide End Mill with High Helix Geometry for Excellent surface finishes and Superior Chip Removal.
£10.88 excl. VAT
£13.06 incl. VAT
FRANKEN Long Length High Performance End Mill 3XD
FRANKEN Top-Cut Long Length High Performance End Mill 3XD
- Solid micrograin carbide
- TiALN coated
- Long Series (3XD)
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£26.10 excl. VAT
£31.32 incl. VAT
CLARKSON HSS CO8 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium
CLARKSON HSS CO8 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for aluminium and non-ferrous materials
£27.46 excl. VAT
£32.95 incl. VAT
Pulsar Blue 4 Flute Corner Radius Extended Neck End Mill for Hardened Steel
Pulsar Blue 4 Flute Extended Neck Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£35.64 excl. VAT
£42.77 incl. VAT
Clarkson 2 Flute HSS Threaded Shank Slot Drill
Clarkson 2 Flute HSS Threaded Shank Slot Drill
- HSS
- Threaded shank
- Uncoated
- Suitable for a wide range of materials
£4.05 excl. VAT
£4.86 incl. VAT
4 Flute CrN Coated Carbide Aluminium End Mill
4 Flute CrN Coated Carbide Aluminium End Mill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£15.88 excl. VAT
£19.06 incl. VAT
ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£41.17 excl. VAT
£49.40 incl. VAT
ZCC-CT HM-6EL Series 6 Flute End Mill with Long Straight Shank for Hardened Steel Machining
ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£32.22 excl. VAT
£38.66 incl. VAT
NANO-MILL Max-Mill JKB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 150mm OAL
£33.65 excl. VAT
£40.38 incl. VAT
CLARKSON HSS Co8 4 Flute Ball Nose End Mill
CLARKSON HSS Co8 4 Flute Ball Nose End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£15.84 excl. VAT
£19.01 incl. VAT
Clarkson 6 Flute HSS Threaded Shank Long Length End Mill
£5.64 excl. VAT
£6.77 incl. VAT
CLARKSON HSS 1 Flute End Mill for Aluminium
CLARKSON HSS 1 Flute End Mill for Aluminium
- HSS
- Uncoated
- Suitable for aluminium and non-ferrous material
£8.15 excl. VAT
£9.78 incl. VAT
CLARKSON HSS TiALN Coated 1 Flute End Mill for Aluminium
CLARKSON HSS TiALN coated 1 Flute End Mill for Aluminium
- HSS
- Uncoated
- Suitable for aluminium and non-ferrous material
£13.88 excl. VAT
£16.66 incl. VAT
2 Flute CrN Coated Carbide Aluminium Slot Drill
2 Flute CrN Coated Carbide Aluminium Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£14.38 excl. VAT
£17.26 incl. VAT
AL-2R 2 Flute Corner Radius End Mill for Aluminium
AL-2R 2 Flute Corner Radius End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£43.38 excl. VAT
£52.06 incl. VAT
ZCC-CT HM-4EFP 4 Flute With Reduced Neck for Hardened Steel
ZCC-CT HM-4EFP 4 Flute Reduced Neck End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£34.15 excl. VAT
£40.98 incl. VAT
Alu-XP 142303 Series 3 Flute Carbide Corner Radius End Mill for Aluminium & Non-Ferrous Machining
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£12.63 excl. VAT
£15.16 incl. VAT
ZCC-CT UM-4EL 4 Flute Long Length Variable Helix End Mill
ZCC-CT UM-4EL Series 4 Flute Long Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£22.36 excl. VAT
£26.83 incl. VAT
ZCC-CT UM-4RL 4 Flute Long Length Corner Radius Variable Helix End Mill
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£25.03 excl. VAT
£30.04 incl. VAT
MasterMill VX Series 4 Flute Short Length High Performance End Mill
- Short design
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£11.64 excl. VAT
£13.97 incl. VAT
MasterMill VX Series 4 Flute Corner Radius High Performance End Mill
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£24.82 excl. VAT
£29.78 incl. VAT
MasterMill VX Series 4 Flute Long Length High Performance Necked End Mill
- Solid micrograin carbide
- Necked design
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£21.86 excl. VAT
£26.23 incl. VAT