Special Offers

ER50 standard type collet set with max 10 micron runout - 12 piece high precision ER collets : 12mm - 34mm in 2mm increments.

ER50 standard type collet set with max 5 micron runout - 12 piece ultra high precision ER collets : 12mm - 34mm in 2mm increments.

ER25 Tapping with Square Collet Set with Max 10 Micron Runout - 15 piece high precision ER collet set : 3.5mm - 16mm diameter.

ER40 Tapping with Square Collet Set with Max 10 Micron Runout - 19 piece high precision ER collet set : 3.5mm - 25mm diameter.

• Easy to read LCD Display
• Functions: mm/inch conversion, on/off, zero setting, battery low indication
• Ground & Micro lapped measuring surfaces.
• Functions: mm/inch conversion, on/off, zero setting, preset.
• With fine adjustment.
• Supplied with carbide tipped scriber.
• Hand wheel operation with positive lock.

ER11 coolant sealed <15 micron runout collets, in diameters from 3.00mm to 6.00mm. Coolant sealed, standard accuracy ER collets

ER40 coolant sealed <10 micron runout collets, in diameters from 3.00mm - 26.00mm. Coolant sealed, high accuracy ER collets

ER50 standard 10 micron runout collets, available in diameters from 6mm - 40mm. Standard type, high accuracy ER collets

ER50 standard 5 micron runout collets available in diameters from 6mm - 40m. Standard type, ultra high accuracy ER collets

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• GLT coated for improved tool life works in copper alloys in addition to aluminium
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Franken Alu-Cut solid carbide 3 flute end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

Features:

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Several corner radii per cutting diameter
• Suitable for z-axis milling
• Suitable for roughing and finishing
• Low-vibration machining

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NT2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• GLT1 is a Multi layered coating which has a hard smooth surface
• Tremendous increase in tool life and superior swarf evacuation
• High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• GLT1 is a Multi layered coating which has a hard smooth surface
• Tremendous increase in tool life and superior swarf evacuation
• High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 2 x d1

CLARKSON HSS Co8 4 Flute Ball Nose End Mill

• HSS 8% cobalt 
• Uncoated
• Weldon (flatted) shank
• Suitable for a wide range of materials

CLARKSON HSS TiALN coated 1 Flute End Mill for Aluminium

• HSS
• Uncoated
• Suitable for aluminium and non-ferrous material

Clarkson 2 Flute HSS Co8 TiALN Coated Extra-Long Length Slot Drill

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

MasterMill VX5 171323 Series 5 Flute High Performance Short End Mill

• Solid micrograin carbide
• Short design
• Chamfered for corner protection
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials
• High rigidity of flute for heavy profiling and high speed machining
• Reinforced cutting edge

Pulsar Blue 2 Flute Rib Processing Corner Radius Slot Drill for Hardened Steel

• Premium nanograin carbide
• Suitable for dry cutting
• Corner radius
• Suitable for machining upto 70HRC
• High speed cutting
• 30 degree helix
• Excellent workpiece finish

MasterMill VX6 173329 Series 6 Flute High Performance Long Length Corner Radius End Mill

• Solid micrograin carbide
• Long series
• Optimised for high speed and trochoidal milling
• Corner radius
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials

MasterMill VX5 174323 Series 5 Flute High Performance Corner Radius End Mill

• Solid micrograin carbide
• Corner radius
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials
• High rigidity of flute for heavy profiling and high speed machining
• Reinforced cutting edge