Tool Holding
BT30 End Mill Holder Balanced up to 15,000rpm G6.3
- BT30 taper (BT MAS)
- Balanced at 15,000 rpm G6.3
£24.90 excl. VAT
£29.88 incl. VAT
ER25 Standard Nut Wrench - Spanner for use with ER25 Collet Chuck Standard Nuts
ER25 standard nut wrench - Spanner suitable for use with all ER25 collet chucks, including straight shank collet holders.
£4.99 excl. VAT
£5.99 incl. VAT
ISO40 Morse Taper Adaptor Balanced Up To 15,000 rpm G6.3
- ISO40 taper (DIN2080)
- Balanced at 15,000 rpm G6.3
£29.90 excl. VAT
£35.88 incl. VAT
ER20 Coolant Sealed Collets with Max 5 Micron Runout
ER20 coolant sealed <5 micron runout collets, in diameters from 3.00mm - 13.00mm. Coolant sealed, ultra high accuracy ER collets
ER16 Standard Nut Wrench - Spanner for use with ER16 Collet Chuck Standard Nuts
ER16 standard nut wrench - Spanner suitable for use with all ER16 collet chucks, including straight shank collet holders.
£4.99 excl. VAT
£5.99 incl. VAT
DIN2080 (ISO30 / ISO40 / ISO50) Standard Type Pull Stud
Standard type pull studs (without through coolant) for use with all DIN2080 (ISO30 / ISO40 / ISO50) spindle tooling systems
HSK63A ER Collet Chuck Balanced Up To 15,000 rpm G6.3
- HSK63A taper (DIN69893)
- Balanced at 15,000 rpm G6.3
£66.40 excl. VAT
£79.68 incl. VAT
ER8 Standard Collets with Max 15 Micron Runout
ER08 standard <15 micron runout collets, available in diameters from 1.00mm - 5.00mm. Standard type, standard accuracy ER collets
BT40 Keyless Drill Chuck Balanced Up To 15,000 rpm G6.3
- BT40 taper (BT MAS)
- Balanced at 15,000 rpm G6.3
£92.00 excl. VAT
£110.40 incl. VAT
ER11 Standard Collets with Max 15 Micron Runout
ER11 standard <15 micron runout collets, available in diameters from 1.00mm - 8.00mm. Standard type, standard accuracy ER collets
ER08 Standard Type Collet Set with Max 10 Micron Runout
ER08 standard type collet set with max 10 micron runout - 9 piece high precision ER collets : 1mm - 5mm in 0.5mm increments.
£72.92 excl. VAT
£87.50 incl. VAT
£54.69excl. VAT
£65.63incl. VAT
Straight Shank ER Collet Chuck with Hexagon Nut
£25.30 excl. VAT
£30.36 incl. VAT
ISO50 Face Mill Arbour Balanced Up To 15,000 rpm G6.3
- ISO50 taper (DIN2080)
- Balanced at 15,000 rpm G6.3
£62.68 excl. VAT
£75.22 incl. VAT
ER16 Standard Type Collet Set with Max 10 Micron Runout
ER16 standard type collet set with max 10 micron runout - 10 piece high precision ER collets : 1mm - 10mm in 1mm increments.
£60.62 excl. VAT
£72.74 incl. VAT
£45.47excl. VAT
£54.56incl. VAT
ER08 Mini Nut Wrench - Spanner for use with ER8 Slimline Collet Chuck Mini-Nuts
ER08 mini nut wrench - Spanner suitable for use with all ER08 slimline collet chucks, including straight shank collet holders.
£9.31 excl. VAT
£11.17 incl. VAT
ER20 Coolant Sealed Collets with Max 15 Micron Runout
ER20 coolant sealed <15 micron runout collets, available in diameters from 3.00mm to 13.00mm. The coolant sealed, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.
ER20 Standard Locknut for use with ER20 Standard-Nut Collet Chucks
Replacement / spare bearing locknut for use with ER20 collet chucks. Fits all ER20 bearing nut chucks including straight shank
£8.95 excl. VAT
£10.74 incl. VAT
ISO50 End Mill Holder Balanced Up To 15,000 rpm G6.3
- ISO50 taper (DIN2080)
- Balanced at 15,000 rpm G6.3
£48.88 excl. VAT
£58.66 incl. VAT
ER20 Hexagon Locknut for use with ER20 Hex-Nut Collet Chucks
Replacement / spare hexagon locknut for use with ER20 collet chucks. Fits all ER20 hexagon nut chucks including straight shank
£9.13 excl. VAT
£10.96 incl. VAT
ER20 Mini Nut Wrench - Spanner for use with ER20 Slimline Collet Chuck Mini-Nuts
ER20 mini nut wrench - Spanner suitable for use with all ER20 slimline collet chucks, including straight shank collet holders.
£10.69 excl. VAT
£12.83 incl. VAT
ER16 Hexagon Nut Wrench - Spanner for use with ER16 Collet Chuck Hex-Nuts
ER16 hexagon nut wrench - Spanner suitable for use with all ER16 collet chucks, including straight shank collet holders.
£6.56 excl. VAT
£7.87 incl. VAT
ER50 Standard Nut Wrench - Spanner for use with ER16 Collet Chuck Standard Nuts
ER50 standard nut wrench - Spanner suitable for use with all ER50 collet chucks, including straight shank collet holders.
£20.66 excl. VAT
£24.79 incl. VAT
ER11 Mini Locknut for use with ER11 Mini-Nut Collet Chucks
Replacement / spare mini locknut for use with ER11 collet chucks. Fits all ER11 mini nut chucks including straight shank
£8.95 excl. VAT
£10.74 incl. VAT
ER20 Standard Collets with Max 10 Micron Runout
ER20 standard <10 micron runout collets, available in diameters from 1.00mm - 13.00mm. Standard type, high accuracy ER collets