4 Flute Milling Cutters Milling Tools

ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.

ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.

MasterMill VX5 173323 Series 5 Flute High Performance Short Corner Radius End Mill

• Solid micrograin carbide
• Short design
• Corner radius
• Multi layer VX coated
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
• Exceptional performance in Titanium, Inconel and other HRSA materials
• High rigidity of flute for heavy profiling and high speed machining
• Reinforced cutting edge

ZCC-CT UM-4RFP Series 4 Flute Short Cutting Edge Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill

• Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
• Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
• End mills and torus Mills.
• HSC/HPC machining.
• AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.

ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill With Through Coolant

• Solid micrograin carbide 
• Variable helix geometry
• ALTiN coated
• Through coolant
• Sharp cutting edge designed for HRSA
• Smooth machining with minimal vibration
• One tool for roughing and finishing
• Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
• High metal removal rates

ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.

Pulsar Blue 4 Flute Extended Neck Corner Radius End Mill for Hardened Steel

• Premium nanograin carbide
• Suitable for dry cutting
• Corner radius
• Suitable for machining upto 70HRC
• High speed cutting
• 30 degree helix
• Excellent workpiece finish

ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

Powder Metal 4 Flute Long Length End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials

ZCC-CT VSM 4 Flute High Performance Solid Carbide Corner Radius End Mill

• Solid micrograin carbide
• ALTiN coated
• Wide range of corner radii available
• Variable helix geometry
• Sharp cutting edge designed for HRSA
• Smooth machining with minimal vibration
• One tool for roughing and finishing
• Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
• High metal removal rates

4 Flute CrN Coated Carbide Aluminium End Mill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 1mm-12mm 

• For Machining Up To 55HRC
• Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
• Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
• Diameter Range 3mm - 20mm 
• Solid Micrograin Carbide
• PVD Coated Substrate

Powder Metal 4 Flute Standard Length End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials. 

Powder Metal Flute Short Length Fine Pitch End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Fine pitch

Powder Metal Long Length Fine Pitch End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Fine pitch 

Powder Metal Extended Neck Fine Pitch End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Fine pitch 

Powder Metal Short Length Coarse Pitch End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Coarse pitch 

Powder Metal Extended Neck Coarse Pitch Ripper (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials
• Coarse pitch  

Corner Radius Extended Neck 4 Flute Milling Cutters For Graphite (Europa) 

• High hardness coating for increased wear resistance. 
• High performance on graphite and non-metals.
• Unique ultra fine diamond coating for high quality surface finish.