Lathe Tools

• Tool designed for burnishing internal and/or external surfaces
• For burnishing holes from Ø22 mm x 70 mm deep
• Usable on workpiece of different types of materials with hardness up to 45 HRC
• Tool supplied with a single burnishing roll

• Usable on pieces of different types of materials with hardness of 45 HRC
• Form E roll for use with form E tools
• Provided with a U type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4
• Tool supplied with a single burnishing roll

• Form B for use with form B tools
• Usable on pieces of different types of materials with hardness of 45 HRC
• Provided with a B type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4
• Tool supplied with a single burnishing roll

• Usable on pieces of different types of materials with hardness of 45 HRC
• Form U for use with form U tools
• Provided with a U type burnishing roll made of HSS and tempered to 62 HRC, with a polished surface to Ra<0.4

• Tool designed for burnishing external diameters of various shapes on sliding head lathes
• The diamond tip is aligned with the top face of the shank
• The pressure of the head can be adjusted in order to obtain different levels of burnishing on the workpiece
• Can be used on workpiece made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the life of the tool

• Tool designed for burnishing on lathes, on various profiles
• Diamond tip aligned with the top face of the shank
• The head is equipped with an internal spring system to regulate the pressure of the diamond tip, making it homogeneous on all parts
• Can be used on workpieces made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the life of the tool

• Tool designed for burnishing on lathes, on various profiles
• Diamond tip aligned with the the centre of the shank
• The head is equipped with an interal spring system to regulate the pressure of the diamond tip, making it homogenous on all parts (Fig.1)
• Can be used on workpieces made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the life of the tool

• Tool designed for burnishing on lathes, on various profiles
• Diamond tip aligned with the top face of the shank
• The head is equipped with an internal spring sytem to regulate the pressure of the diamond tip, making it homogeneous on all parts (Fig.3)
• Can be used on workpieces made of different types of materials with hardness up to 63 HRC
• Possibility of placing the diamond tip in different positions to extend the tool life

• 30 degree angle
• Tool designed for burnishing on lathes, external surfaces of various shapes
• Compact design
• Indexable diamond tip for extended tool life
• Tool head supported by an internal preload spring system, for constant pressure on all parts
• Can be used on different mateiral with hardness up to 63HRC
• Diamond tip not included

• 45 degree angle
• Tool designed for burnishing on lathes, external surfaces of various shapes
• Compact design
• Indexable diamond tip for extended tool life
• Tool head supported by an internal preload spring system, for constant pressure on all parts
• Can be used on different mateiral with hardness up to 63HRC
• Diamond tip not included

• 60 degree angel
• Tool designed for burnishing on lathes, external surfaces of various shapes
• Compact design
• Indexable diamond tip for extended tool life
• Tool head supported by an internal preload spring system, for constant pressure on all parts
• Can be used on different mateiral with hardness up to 63HRC
• Diamond tip not included

Parting Blade With 10 Inserts

• Steel parting blade for AP style inserts
• Available in 26mm or 32mm height
• Inserts can be removed with a flathead screwdriver or an insert extractor
• Supplied with 10x general purpose parting inserts

Tool Holder:

• Steel Grooving Toolholder
• Suitable For MGMN And MRMN Style Inserts
• Full Radius Inserts Available
• Suitable For External Grooving, Turning And Parting Off
• Right Hand Cutting

Parting Off Inserts:

• PVD Coated
• Grade UM25 (M25, P35 + PVD NaCo3) Suitable For Steel, Stainless And General Use On A Wide Range Of Materials.

Tool Holders:

• Steel Internal Grooving Tools
• Right Hand Cutting
• Suitable For MGMN And MRMN Style Inserts
• Full Radius Inserts Available

Parting Off Inserts:

PVD Coated
Grade UM25 (M25, P35 + PVD NaCo3) Suitable For Steel, Stainless And General Use On A Wide Range Of Materials.

CNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available
• CNMG negative geometry with 4 cutting edges 
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SM3230 - CVD coated for a wide range of stainless steels
• Grade SM5015A - PVD coated for HRSA's, duplex and stainless steels

WNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• WNMG negative geometry with 6 cutting edges 
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1225S - CVD coated for a wide range of steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SM3230 - CVD coated for a wide range of stainless steels
• Grade SM5015A - PVD coated for HRSA's, duplex and stainless steels

DNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• DNMG negative geometry with 4 cutting edges 
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SM3230 - CVD coated for a wide range of stainless steels
• Grade SM5015A - PVD coated for HRSA's, duplex and stainless steels
• Grade SM5115 - PVD coated for HRSA's, duplex, stainless steels, steels and non-ferrous materials

TNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• TNMG negative geometry with 6 cutting edges 
• Grade SM3215 - CVD coated suitable stainless steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SP1225S - CVD coated for a wide range of steels
• Grade SM3230 - CVD coated for a wide range of stainless steels

CCGX Style Turning Inserts (Starke)

• CCGX style positive inserts with 2 cutting edges
• Highly polished to prevent swarf build up
• High rake angle for non-ferrous machining
• Grade NK10 suitable for roughing and finishing on aluminiums and plastics

CCMT Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• CCMT positive geometry with 2 cutting edges 
• Grade SM0315 - PVD coated suitable for stainless steels
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1025 - CVD coated for a wide range of steels
• Grade SP1315 - CVD coated for machining steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels

DCGX Style Turning Inserts (Starke)

• DCGX style positive inserts with 2 cutting edges
• Highly polished to prevent swarf build up
• High rake angle for non-ferrous machining
• Grade NK10 suitable for roughing and finishing on aluminiums and plastics

DCMT Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• DCMT positive geometry with 2 cutting edges 
• Grade SM0315 - PVD coated suitable for stainless steels
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1025 - CVD coated for a wide range of steels
• Grade SP1315 - CVD coated for machining steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels

SNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• SNMG negative geometry with 8 cutting edges 
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SM5115 - PVD coated for HRSA's, duplex, stainless steels, steels and non-ferrous materials

VBMT Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• VBMT positive geometry with 2 cutting edges 
• Grade SM5015A - PVD coated for HRSA's, duplex and stainless steels
• Grade SM5115 - PVD coated for HRSA's, duplex, stainless steels, steels and non-ferrous materials
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SM0115 - PVD coated suitable for steels and stainless steels