STARKE

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 25mm

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.
• Replaces the V554 series. Now has an improved coating to machine to a higher HRC.

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 20mm

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

• Micrograin Carbide
• TIALN coated to machine up to 45 HRC
• Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
• Centre cutting
• Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm

ALI-MILL Solid Carbide 2 Flute 45 Degree Slot Drill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.

• The special Hi-Helix geometry enables better chip removal.

• Micrograin carbide

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 1mm and 20mm

• Micrograin Carbide
• TiALN Coated for Increased Tool Life
• For General Machining of Steel, Stainless Steel and Cast Iron 
• 3XD
• Without Through Coolant

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm to 20mm

• Micrograin Carbide
• TiALN Coated for Increased Tool Life
• For General Machining of Steel, Stainless Steel and Cast Iron 
• 5XD
• Without Through Coolant

• Cut up to 55 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 6mm and 20mm

• Suitable for machining aluminium and other non-ferrous materials
• Mirror polishied flutes
• Excellent surface finishe and superior chip removal
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

• Coated carbide
• Tix04 3 layer coating for improved tool life, TiN, AICRSiN & TiSiN
• Excellent performance on steels, stainless steel and cast iron
• Sizes available 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm and 20mm

• Suitable for machining of aluminium and other non-ferrous materials.
• Mirror polished fl utes
• Excellent surface finishes, superior chip removal.
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

• Solid carbide
• TISIN coated to machine up to 60 HRC
• 2XD minimum flute length
• Standard metric coarse
• Sizes available: M3 to M16

• Solid micrograin carbide
• 38 degree helix geometry enable better chip removal
• Polished flutes for superior surface finish
• 2 flutes

• 3 & 4 flute HSSE end mill ripper
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

• 3 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

• 4 flute HSSE end mill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

• 2 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

VNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• VNMG negative geometry with 4 cutting edges 
• Grade SM0115 - PVD coated suitable for steels and stainless steels

VCMT Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• VCMT positive geometry with 2 cutting edges 
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels

VCGX Style Turning Inserts (Starke)

• VCGX style positive inserts with 2 cutting edges
• Highly polished to prevent swarf build up
• High rake angle for non-ferrous machining
• Grade NK10 suitable for roughing and finishing on aluminiums and plastics

VBMT Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• VBMT positive geometry with 2 cutting edges 
• Grade SM5015A - PVD coated for HRSA's, duplex and stainless steels
• Grade SM5115 - PVD coated for HRSA's, duplex, stainless steels, steels and non-ferrous materials
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SM0115 - PVD coated suitable for steels and stainless steels