Hole Making Tools
Osborn 810334 HSS-Ex 60 degree (form A) Metric Centre Drill - DIN333A
For machining steels, stainless steel, cast iron, titanium, aluminium and plastics.
Features:
• HSS-E.
• Uncoated.
• Point angle: 120 degree
• k12 Tolerance.
• Straight Shank Centre Drill
Taper Shank Intermediate Reamers Carbide
- Intermediate precision carbide tipped (K10) taper shank Reamer.
- Left hand spiral flute, right hand cutting, DIN 8051 B
- Tolerance :
- D = ISO H5
- Items on this list are manufactured to order, please allow 48/72 hours for despatch.
£177.89 excl. VAT
£213.47 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£8.12 excl. VAT
£9.74 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£9999.99 excl. VAT
£11999.99 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£8.27 excl. VAT
£9.92 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£9999.99 excl. VAT
£11999.99 incl. VAT
Long Series Taper Shank Reamers HSS
- Intermediate precision HSS (M2) long series taper shank Reamer.
- Left hand spiral flute, right hand cutting, BS 328/4
- Supplied by Toolex Ltd.
- Tolerance :
- D = ISO H5
- Items on this list are manufactured to order, please allow 48/72 hours for despatch.
£81.17 excl. VAT
£97.40 incl. VAT
Osborn 820604 HSS Goldex Stub Drill – DIN338
Drilling in steel, cast steel - alloyed and non-alloyed, stainless steel, titanium and aluminium.
Straight Shank Spade Drill Extra Long Length
- Excellent chip evacuation
- Body clearance to avoid clogging and workpiece contact
- Nickel plated for added wear resistance
- Versatile drilling system to produce multiple diameters with one tool
- Wide range of inserts available to suit
£501.31 excl. VAT
£601.57 incl. VAT
Taper Shank Spade Drills Short Length
- Excellent chip evacuation
- Body clearance to avoid clogging and workpiece contact
- Nickel plated for added wear resistance
- Versatile drilling system to produce multiple diameters with one tool
- Wide range of inserts available to suit
£164.07 excl. VAT
£196.88 incl. VAT
Carbide Stub Through Coolant Straight Shank Reamers
- Intermediate precision carbide (k10) stub Reamer.
- Left hand spiral flute, right hand cutting, through Coolant, DIN 8093.
- Tolerance :
- D = ISO H4
£86.57 excl. VAT
£103.88 incl. VAT
ZCC-CT 1165PA03 PA Series 3 Flute Solid Coated Carbide Twist Drill Aluminium & Non-Ferrous Drilling - 3xD Stub Drill
1165PA03 PA Series by ZCC-CT.
- Designed to machine materials with short chips such as aluminium and non-ferrous materials
- 3xD stub drill
- 3 flutes
£11.67 excl. VAT
£14.00 incl. VAT
Osborn 810504 Goldex HSS Jobber General Purpose Drill Sets
High performance self-centring HSS goldex jobber drills with Titanium Nitride (TiN) coating on the working part of the drill. Long tool life on materials including steel alloyed and non-alloyed cast steel cast iron grey cast iron titanium aluminium graphite and malleable cast iron.
£62.39 excl. VAT
£74.87 incl. VAT
ZCC-CT 1588SL20C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 20xD Long Series
1588SL20C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 20xD long series
- Through coolant
£173.45 excl. VAT
£208.14 incl. VAT
Long Series Taper Shank Reamers HSS
- Intermediate precision HSS (M2) long series taper shank Reamer.
- Left hand spiral flute, right hand cutting, BS 328/4
- Supplied by Toolex Ltd.
- Tolerance :
- D = ISO H5
- Items on this list are manufactured to order, please allow 48/72 hours for despatch.
£143.14 excl. VAT
£171.77 incl. VAT
SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£9999.99 excl. VAT
£11999.99 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£9999.99 excl. VAT
£11999.99 incl. VAT
ZCC-CT 1534SH03 SH Series Solid Coated Carbide Twist Drill for Hardened Steel Drilling - 3xD Stub Drill
1534SH03 SH Series by ZCC-CT.
- Solid carbide with high performance coating for drilling high hardness steel (HRc 40-60) and higher tensile strength.
- 3xD stub drill
£21.21 excl. VAT
£25.45 incl. VAT
ZCC-CT 1588SL10C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 10xD Long Series
1588SL10C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 10xD long series
- Through coolant
£63.94 excl. VAT
£76.73 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£6.81 excl. VAT
£8.17 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£9.68 excl. VAT
£11.62 incl. VAT
ZCC-CT 1588SL30C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 30xD Long Series
1588SL30C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 30xD long series
- Through coolant
£227.59 excl. VAT
£273.11 incl. VAT
Taper Shank Spade Drill Intermediate Length
- Excellent chip evacuation
- Body clearance to avoid clogging and workpiece contact
- Nickel plated for added wear resistance
- Versatile drilling system to produce multiple diameters with one tool
- Wide range of inserts available to suit
£239.37 excl. VAT
£287.24 incl. VAT
Hand Reamers Straight Shank (Standard H7 Tolerance) HSS
- Standard HSS (M2) Hand Reamer.
- Left hand spiral flute, right hand cutting, DIN 206-B
- Tolerance :
- D = ISO H7
£30.42 excl. VAT
£36.50 incl. VAT

-metric-centre-drill-din333a.jpg&w=640&q=75)






















