Special Offers

Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.

Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel

• Premium nanograin carbide
• Suitable for dry cutting
• Corner radius
• Suitable for machining upto 70HRC
• High speed cutting
• 45 degree helix
• Excellent workpiece finish

Powder Metal 4 Flute Long Length End Mill Weldon Shank (Europa)

• Sabre coating for increased wear resistance at high speeds.
• Designed for steels, stainless steels and cast iron.
• Suitable for use on difficult to cut materials

Clarkson 3 Flute HSS Co8 Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Pulsar Blue 2 Flute Rib Processing Corner Radius Slot Drill for Hardened Steel

• Premium nanograin carbide
• Suitable for dry cutting
• Corner radius
• Suitable for machining upto 70HRC
• High speed cutting
• 30 degree helix
• Excellent workpiece finish

ZCC-CT VSM 4 Flute High Performance Solid Carbide Corner Radius End Mill

• Solid micrograin carbide
• ALTiN coated
• Wide range of corner radii available
• Variable helix geometry
• Sharp cutting edge designed for HRSA
• Smooth machining with minimal vibration
• One tool for roughing and finishing
• Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
• High metal removal rates

• Intermediate precision HSS-E AcuRea (M35 Cob) straight shank Reamer.
• Left hand spiral flute, right hand cutting, DIN 212-B
• AcuRea : Hard surface multi layer nano chrome coating.
• Tolerance :
  • D = ± 0.0015 mm

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NT2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

Clarkson 3 Flute HSS Co8 TiAlN Coated Short Length End Mill 

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

Clarkson 2 Flute HSS Co8 Extra-Long Length Slot Drill

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

CLARKSON HSS Co8 2 Flute Long Length Threaded Shank Slot Drill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

• For Machining Up To 55HRC
• Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
• Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
• Diameter Range 3mm - 20mm 
• Solid Micrograin Carbide
• PVD Coated Substrate

• For Machining Up To 55HRC
• Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
• Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
• Diameter Range 3mm - 20mm 
• Solid Micrograin Carbide
• PVD Coated Substrate

BT40 shrink fit holder through coolant

• BT40 taper
• Balanced up to 25,000rpm G2.5 
• Internal coolant through the collar (AD/B)
• Better performance, longer tool life and quicker set up times than conventional holders

BT50 shrink fit holder through coolant

• BT40 taper
• Balanced up to 25,000rpm G2.5 
• Internal coolant through the collar (AD/B)
• Better performance, longer tool life and quicker set up times than conventional holders

SK40 shrink fit holder through coolant

• SK40 taper (DIN69871)
• Balanced up to 25,000rpm G2.5 
• Internal coolant through the collar (AD/B)
• Better performance, longer tool life and quicker set up times than conventional holders

SK50 shrink fit holder through coolant

• SK50 taper (DIN69871)
• Balanced up to 25,000rpm G2.5 
• Internal coolant through the collar (AD/B)
• Better performance, longer tool life and quicker set up times than conventional holders

BT40 hydraulic through coolant chuck

• BT40 taper
• Balanced up to 25,000rpm G2.5
• Internal coolant through the collar (AD/B)
• Better performance, longer tool life and quicker set up times than conventional holders

SK40 hydraulic chuck through coolant

• SK40 taper (DIN69871)
• Balanced up to 25,000rpm G2.5 
• Internal coolant through the collar (AD/B)
• Better performance, longer tool life and quicker set up times than conventional holders

BT50 hydraulic through coolant chuck

• BT50 taper
• Balanced up to 25,000rpm G2.5 
• Internal coolant through the collar (AD/B)
• Better performance, longer tool life and quicker set up times than conventional holders

SK50 hydraulic chuck through coolant

• SK50 taper (DIN69871)
• Balanced up to 25,000rpm G2.5 
• Internal coolant through the collar (AD/B)
• Better performance, longer tool life and quicker set up times than conventional holders

Reduction sleeves to be used with hydraulic chucks.

The RH12 range is for a 12mm hydraulic chuck reducing the diameter to between 2mm and 10mm

Reduction sleeves to be used with hydraulic chucks.

The RH20 range is for a 20mm hydraulic chuck reducing the diameter to between 2mm and 18mm