Milling Cutters Milling Tools

FRANKEN Top-Cut 3 Flute High Performance Short Length End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill

• Solid micrograin carbide
• Variable helix geometry
• ALTiN coated
• Sharp cutting edge designed for HRSA
• Smooth machining with minimal vibration
• One tool for roughing and finishing
• Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
• High metal removal rates

FRANKEN Top-Cut Long Length High Performance End Mill 3XD

• Solid micrograin carbide
• TiALN coated 
•  Long Series (3XD) 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

CLARKSON HSS CO8 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank
• Suitable for aluminium and non-ferrous materials

Max-Mill Coated Carbide 3 Flute End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Clarkson 4-6 Flute HSS Co8 TiAlN Coated Short Length End Mill

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

ZCC-CT HM-2E 2 Flute End Mill with Straight Shank

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• GLT coated for improved tool life works in copper alloys in addition to aluminium
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Clarkson 2 Flute HSS Co8 TiALN Coated Extra-Long Length Slot Drill

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill With Through Coolant

• Solid micrograin carbide 
• Variable helix geometry
• ALTiN coated
• Through coolant
• Sharp cutting edge designed for HRSA
• Smooth machining with minimal vibration
• One tool for roughing and finishing
• Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
• High metal removal rates

CLARKSON HSS TiALN coated 1 Flute End Mill for Aluminium

• HSS
• Uncoated
• Suitable for aluminium and non-ferrous material

• Solid Micrograin Carbide
• TiALN coated
• Suitable for machining upto 55HRC
• Can be used for wet and dry cutting
• Centre cutting

CLARKSON Series HSS Co8 3 Flute Long Length Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.

Clarkson 3 Flute HSS Co8 Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

4 Flute CrN Coated Carbide Aluminium End Mill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 1mm-12mm 

Clarkson 3 Flute HSS Co8 TiAlN Coated Short Length End Mill 

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

Clarkson 2 Flute HSS Co8 Extra-Long Length Slot Drill

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

ALI-MAX Solid Carbide 3 Flute End Mill from Nano-Mill 

• 55 degree helix
• Manufactured from ultra fine micrograin carbide
• Sharp cutting edge for greater swarf evacuation
• Ideal for aluminium and non-ferrous machining