3 Flute Milling Cutters Milling Tools
Franken 3 Flute Carbide Corner Radius End Mill for Aluminium
Series: 2546
Franken Alu-Cut solid carbide 3 flute end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
Features:
- High performance tool.
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Several corner radii per cutting diameter
- Suitable for z-axis milling
- Suitable for roughing and finishing
- Low-vibration machining
Starting From:
£31.07 excl. VAT
£37.28 incl. VAT
£31.07 excl. VAT
£37.28 incl. VAT
FRANKEN 3 Flute Long Length Corner Radius For Aluminium
Series: 2546K
Franken Alu-Cut solid carbide 3 flute long length end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
Features:
- High performance tool.
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Several corner radii per cutting diameter
- Suitable for z-axis milling
- Suitable for roughing and finishing
- Low-vibration machining
Starting From:
£40.95 excl. VAT
£49.14 incl. VAT
£40.95 excl. VAT
£49.14 incl. VAT
CLARKSON HSS Co8 3 Flute 37 Degree Helix Coarse Pitch Short Length Roughing End Mill
Series: 124121
CLARKSON HSS CO8 TiALN coated 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for aluminium and non-ferrous materials
Starting From:
£35.92 excl. VAT
£43.10 incl. VAT
£35.92 excl. VAT
£43.10 incl. VAT
CLARKSON HSS Co8 TiAlN Coated 3 Flute Long Length End Mill
Series: 105121
CLARKSON HSS Co8 TiAlN Coated 3 Flute Long Length End Mill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£19.57 excl. VAT
£23.48 incl. VAT
£19.57 excl. VAT
£23.48 incl. VAT
Clarkson 3 Flute HSS Co8 TiAlN Coated Short Length End Mill
Series: 104121
Clarkson 3 Flute HSS Co8 TiAlN Coated Short Length End Mill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£11.94 excl. VAT
£14.33 incl. VAT
£11.94 excl. VAT
£14.33 incl. VAT
Clarkson 3 Flute HSS Co8 Short Length End Mill
Series: 104102
Clarkson 3 Flute HSS Co8 Short Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£9.15 excl. VAT
£10.98 incl. VAT
£9.15 excl. VAT
£10.98 incl. VAT
Ali-Mill 3 Flute Long Series carbide Slot Drill for Aluminium (STARKE AL453)
Series: AL453
- Suitable for machining aluminium and other non-ferrous materials
- Mirror polishied flutes
- Excellent surface finishe and superior chip removal
- Micrograin carbide
- Hi-helix geometry
- Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm