ZCC-CT

• Screw Clamp System
• Suitable for DC** Style Inserts
• 90 Degree Approach

• Double Clamp System
• More Rigid Insert Clamping
• Suitable For TN**
• 91 Degree Approach

• Lever Clamp System
• Suitable for CN** Style Inserts
• 75 Degree Approach

• Screw Clamp System
• Suitable For TC** Style Inserts
• 91 Degree Approach
• Steel Shank

• Diameter range Ø12 – 32 mm
• For steel, stainless steel and cast iron
• Chamfer milling cutter 45°
• Weldon shank

• Diameter range Ø12 – 32 mm
• For steel, stainless steel and cast iron
• Chamfer milling cutter 30°
• Weldon shank

The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

• Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
• Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
• ap· d.o.c. = 1~4(mm)
• f= 0.2~0.5(mm/r)

• Screw Clamp System
• Suitable for TC** Style Inserts
• 91 Degree Approach

DNMG-DF carbide turning insert for finishing

• Grade YBC152 is our best performing finishing insert for turning steel
• CVD coated
• DF chipbreaker is designed for finishing
• DNMG negative geometry
• 55° rhombic Insert

1101SC05 SC Series by ZCC-CT

• Designed to machine materials with short chips such as aluminium and non-ferrous material
• Improved chip flow due to flute geometry and chip space
• Superior finish and avoids built up edge
• 5xD jobber drill

ZCC-CT SEET-LH-YD101 indexable milling inserts for use with the ZCC-CT FMA01, FMA02 and FMB02 indexable face milling bodies.

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

• Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
• Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
• ap· d.o.c. = 1~4(mm)
• f= 0.2~0.5(mm/r)

ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

• Screw Clamp System
• Suitable For SC** Style Inserts
• 75 Degree Approach
• Steel Shank

• Multi Clamp System
• Suitable for CN** Style Inserts
• 75 Degree Approach

WNMG-DR carbide turning insert for roughing

• Grade YBC252 is our best performing roughing insert for turning steel
• CVD coated
• DR chipbreaker is designed for roughing
• WNMG negative geometry
• 80° trigonal Insert

• Diameter range Ø12 – 32 mm
• For steel, stainless steel and cast iron
• Chamfer milling cutter 45°

• Double Clamp System
• More Rigid Insert Clamping
• Suitable For DN**
• 93 Degree Approach

• Multi Clamp System
• Suitable for WN** Style Inserts
• 95 Degree Approach

1105SC03 SC Series by ZCC-CT

• Designed to machine materials with short chips such as aluminium and non-ferrous material
• Improved chip flow due to flute geometry and chip space
• Superior finish and avoids built up edge
• 3xD stub drill

• Lever Clamp System
• Suitable for DN** Style Inserts
• 63 Degree Approach