Steel Milling Cutters Milling Tools
NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£22.29 excl. VAT
£26.75 incl. VAT
ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£41.17 excl. VAT
£49.40 incl. VAT
Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel
Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£47.08 excl. VAT
£56.50 incl. VAT
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck for Hardened Steel
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.33 excl. VAT
£25.60 incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£8.88 excl. VAT
£10.66 incl. VAT
FRANKEN 3 Flute High Performance Short Length End Mill
FRANKEN Top-Cut 3 Flute High Performance Short Length End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£13.69 excl. VAT
£16.43 incl. VAT
Max-Mill TiAlN Coated Carbide 2 Flute Long Length End Mill
- Solid Micrograin Carbide
- TiALN coated
- Suitable for machining upto 55HRC
- Can be used for wet and dry cutting
- Centre cutting
£15.23 excl. VAT
£18.28 incl. VAT
ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel
ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£24.81 excl. VAT
£29.77 incl. VAT
Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill
Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon shank
- Suitable for a wide range of materials
£7.12 excl. VAT
£8.54 incl. VAT
MasterMill VX Series 4 Flute High Performance End Mill
MasterMill VX 178323 Series 4 Flute High Performance End Mill
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£13.17 excl. VAT
£15.80 incl. VAT
NANO-MILL JE Series Coated Carbide 2 Flute Square Slot Drill
Max-Mill Coated Carbide 2 Flute End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£8.28 excl. VAT
£9.94 incl. VAT
ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.64 excl. VAT
£27.17 incl. VAT
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£28.84 excl. VAT
£34.61 incl. VAT
NANO-MILL Max-Mill JLR Series Coated Carbide 4 Flute Corner Radius Long Length End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£13.23 excl. VAT
£15.88 incl. VAT
NANO-MILL Max-Mill JNR Series Coated Carbide 2 Flute Corner Radius End Mill
Max-Mill Coated Carbide 2 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£9.94 excl. VAT
£11.93 incl. VAT
Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill
Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill
- HSS 8% cobalt
- Uncoated
- Weldon shank
- Suitable for a wide range of materials
£4.85 excl. VAT
£5.82 incl. VAT
ZCC-CT HM-2ES Series 2 Flute Micro Diameter End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
- Starting at 0.3mm diameter
£13.31 excl. VAT
£15.97 incl. VAT
Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel
Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£22.44 excl. VAT
£26.93 incl. VAT
NANO-MILL Max-Mill JIB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 75mm OAL
£15.24 excl. VAT
£18.29 incl. VAT
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£33.64 excl. VAT
£40.37 incl. VAT
Clarkson HSS Co8 Long Length Threaded Shank End Mill
Clarkson HSS Co8 Long Length Threaded Shank End Mill
- HSS 8% cobalt
- 4-8 flutes
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£7.22 excl. VAT
£8.66 incl. VAT
CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill
CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill
- HSS 8% cobalt
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£6.38 excl. VAT
£7.66 incl. VAT
ZCC-CT UM-4R 4 Flute Corner Radius Variable Helix End Mill
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£22.26 excl. VAT
£26.71 incl. VAT
FRANKEN Extra Long Length High Performance End Mill 4XD
FRANKEN Extra Long Length High Performance End Mill 4XD
- Solid micrograin carbide
- TiALN coated
- Extra long (4XD)
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£43.42 excl. VAT
£52.10 incl. VAT