Steel Milling Cutters Milling Tools
CLARKSON HSS Co8 4 Flute Long Length Ball Nose End Mill
Series: 116102
CLARKSON HSS Co8 4 Flute Long Length Ball Nose End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£33.92 excl. VAT
£40.70 incl. VAT
£33.92 excl. VAT
£40.70 incl. VAT
CLARKSON TiALN HSS Co8 4 Flute Ball Nose End Mill
Series: 115121
CLARKSON TiALN HSS Co8 4 Flute Ball Nose End Mill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£17.51 excl. VAT
£21.01 incl. VAT
£17.51 excl. VAT
£21.01 incl. VAT
CLARKSON TiALN HSS Co8 2 Flute Ball Nose Slot Drill
Series: 112121
CLARKSON TiALN HSS Co8 2 Flute Ball Nose Slot Drill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£15.19 excl. VAT
£18.23 incl. VAT
£15.19 excl. VAT
£18.23 incl. VAT
Clarkson 4-6 Flute HSS Co8 TiAlN Coated Long Length End Mill
Series: 108121
Clarkson 4-6 Flute HSS Co8 TiAlN Coated Long Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£12.74 excl. VAT
£15.29 incl. VAT
£12.74 excl. VAT
£15.29 incl. VAT
Clarkson 4-6 Flute HSS Co8 TiAlN Coated Short Length End Mill
Series: 107121
Clarkson 4-6 Flute HSS Co8 TiAlN Coated Short Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£10.38 excl. VAT
£12.46 incl. VAT
£10.38 excl. VAT
£12.46 incl. VAT
CLARKSON HSS Co8 TiAlN Coated 3 Flute Long Length End Mill
Series: 105121
CLARKSON HSS Co8 TiAlN Coated 3 Flute Long Length End Mill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£19.57 excl. VAT
£23.48 incl. VAT
£19.57 excl. VAT
£23.48 incl. VAT
Clarkson 3 Flute HSS Co8 TiAlN Coated Short Length End Mill
Series: 104121
Clarkson 3 Flute HSS Co8 TiAlN Coated Short Length End Mill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£11.94 excl. VAT
£14.33 incl. VAT
£11.94 excl. VAT
£14.33 incl. VAT
Clarkson 3 Flute HSS Co8 Short Length End Mill
Series: 104102
Clarkson 3 Flute HSS Co8 Short Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£9.15 excl. VAT
£10.98 incl. VAT
£9.15 excl. VAT
£10.98 incl. VAT
Clarkson 2 Flute HSS Co8 TiAlN Coated Extra-Long Length Slot Drill
Series: 102121
Clarkson 2 Flute HSS Co8 TiALN Coated Extra-Long Length Slot Drill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£17.51 excl. VAT
£21.01 incl. VAT
£17.51 excl. VAT
£21.01 incl. VAT
4 FLUTE POWDER METAL END MILL LONG SERIES
Series: 108140
- Powder Metal
- Sabre coating for increased wear resistance at high speeds.
- Designed for steels, stainless steels and cast iron.
- Suitable for use on difficult to cut materials
Starting From:
£14.53 excl. VAT
£17.44 incl. VAT
£14.53 excl. VAT
£17.44 incl. VAT
ZCC-CT Coated Carbide 2 Flute Slot Drills Long Length
Series: PM2EL
- For Machining Up To 55HRC
- Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
- Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
- Diameter Range 3mm - 20mm
- Solid Micrograin Carbide
- PVD Coated Substrate
Starting From:
£16.67 excl. VAT
£20.00 incl. VAT
£16.67 excl. VAT
£20.00 incl. VAT
ZCC-CT Coated Carbide 4 Flute End Mills Long Length
Series: PM4EL
- For Machining Up To 55HRC
- Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
- Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
- Diameter Range 3mm - 20mm
- Solid Micrograin Carbide
- PVD Coated Substrate
Starting From:
£17.06 excl. VAT
£20.47 incl. VAT
£17.06 excl. VAT
£20.47 incl. VAT