3 Flute Milling Cutters / 3 Flute Slot Drills

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.

• Cut up to 45 HRC 

• Can be used wet or dry to increase tool life.

• Micrograin carbide

• Centre cutting

• Available diameter sizes between 1mm and 20mm

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

• 3 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

• Highest metal removal rates for stable milling processes
• Several corner radii per diameter
• Center cutting
• GLT coated for improved tool life, works in copper alloys in addition to aluminum
• Rough and finish with 1 tool

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

• Highest metal removal rates for stable milling processes
• Several corner radii per diameter
• Center cutting
• Uncoated
• Available with high performance GLT coating works in copper alloys in addition to aluminum
• Rough and finish with 1 tool

FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Corner radius
• Several coerner radii per cutting diameter  
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium 

• Excellent surface finishes.
• Superior chip removal
• Micrograin solid carbide substrate
• Mirror polished Flutes
• Suitable for high speed machining of aluminium and other non-ferrous materials
• Corner protected.
• Long series

Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium 

• Excellent surface finishes.
• Superior chip removal
• Micrograin solid carbide substrate
• Mirror polished Flutes
• Suitable for high speed machining of aluminium and other non-ferrous materials
• Corner protected.
• Long series

FRANKEN Top-Cut 3 Flute High Performance Short Length End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill 

• HSS 8% cobalt
• Uncoated 
• Weldon shank
• Suitable for a wide range of materials

FRANKEN Top-Cut 3 Flute High Performance Long Length End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Clarkson 3 Flute HSS Co8 Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

CLARKSON Series HSS Co8 3 Flute Long Length Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

CLARKSON HSS CO8 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank
• Suitable for aluminium and non-ferrous materials

Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.

Pulsar Blue 3 Flute Ball Nose End Mill for Hardened Steel

• Premium nanograin carbide
• Suitable for dry cutting
• Suitable for machining upto 70HRC
• High speed cutting
• 30 degree helix
• Excellent workpiece finish

Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel

• Premium nanograin carbide
• Suitable for dry cutting
• Suitable for machining upto 70HRC
• High speed cutting
• 30 degree helix
• Excellent workpiece finish

ALU-XP 155303 2 Flute Extended Neck 30 Degree Helix Corner Radius End Mill for Aluminium

• Suitable for high speed machining of aluminium and other non-ferrous materials.

• Excellent surface finishes.

• Superior chip removal.

• Corner radius

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

• High performance tool.
• GLT coated for improved tool life works in copper alloys in addition to aluminium
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Plain Shank

• Suitable for machining aluminium and other non-ferrous materials
• Mirror polishied flutes
• Excellent surface finishe and superior chip removal
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

Clarkson 3 Flute HSS Co8 Short Length End Mill 

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

Franken Alu-Cut solid carbide 3 flute long length end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.

Features:

• High performance tool.
• Special geometry for the machining of aluminium
• Centre cutting
• 3 Flute Ripper
• Several corner radii per cutting diameter
• Suitable for z-axis milling
• Suitable for roughing and finishing
• Low-vibration machining

CLARKSON HSS Co8 TiAlN Coated 3 Flute Long Length End Mill

• HSS 8% cobalt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials