Lubrication

ROCOL FLAWFINDER is a non-destructive inspection system that is designed to provide a fast, reliable method for visual detection of cracks or flaws, which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings, etc.

Highly absorbent white film for rapid results. Suitable for pressure testing and leak detection.

ROCOL PR Spray is designed to give fast, efficient clean release in critical moulding applications. It penetrates and spreads to all parts of the most intricate mould to give full, clean release, with improved gloss finish.

It has a gloss finish, the nature of the gloss finish is not suitable for painting or printing on the surface, please see MOULD RELEASE Spray for an alternative dry film product which is suitable to printing and painting on.

ROCOL MOISTURE GUARD Spray forms a flexible, dry corrosion preventative film. It provides medium/long term indoor corrosion protection, up to five years, of bare metal components and mould tools particularly where condensation is a problem. The flexible film does not chip, crack or attract dirt/dust.

Suitable for indoor protection of components such as bearings, gears, pressings and any machined metal product which requires protection from corrosive attack. Whether in storage, transit or between operations.

ROCOL SPATTER RELEASE Spray has been formulated to allow easy removal of weld spatter from metal surfaces, nozzles, jigs and fixtures. It offers exceptional spatter release, one pass coating. The film allows multiple welds. Silicone free.

Comprsing 1 each of the following:

• 1 FLAWFINDER Cleaner Spray (300ml)
• 1 FLAWFINDER Developer Spray (400ml)
• 1 FLAWFINDER Dye Penetrant (300ml)

ROCOL ULTRAGLIDE X5 is a total protection slideway lubricant which is resistant to water wash off and protects slides from corrosion. With rapid demulsification, separates rapidly from cutting fluid and is easily removed by oil skimmers/separators. It also has great lubricant and load carrying properties, reduces wear and prevents stick slip.

ROCOL RTD® Cleancut is a specially formulated, hand applied cutting lubricant designed to improve all day to day machining operations, whatever the metal being worked. It has a low viscosity, water soluble formula that is non-fuming and has a low odour. Non-staining on yellow metals, aluminium and brass.

Rocol RTD® Spray is an aerosol applied metal cutting lubricant consisting of a concentrate of extreme pressure additives. It is suitable for all metals including hardened steels, titaniums and nimonics, in even the most severe cutting operations.

A must have product for all machine shops, tool-rooms and maintenance departments.

ROCOL RTD® Foamcut is a metal cutting lubricant specially formulated to provide extreme pressure cutting performance in an economical to use foaming aerosol. With a low odour. Its foaming action adheres to the tool, allowing it to be applied directly to moving tools. Suitable for severe cutting operations.

Millersol LF Semi-Synthetic Metalworking Fluid (Millers Oils) 

• Extremely low-foaming even in high pressure systems and soft water areas, to provide consistent lubrication and heat removal
• High level of lubricity additives ensures excellent cutting performance and surface finish
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Chlorine-free and formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol LF is a semi-synthetic, formaldehyde-free metalworking fluid, designed for severe machining operations where a low foaming product is required.

Millersol LF is recommended for use on ferrous alloys including stainless steel and titanium, aluminium alloys and yellow metals.

ROCOL FLAWFINDER is a non-destructive inspection system that is designed to provide a fast, reliable method for visual detection of cracks or flaws, which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings, etc.

ROCOL FLAWFINDER DYE PENETRANT is an aerosol applied red dye which is designed to penetrate into the finest cracks and flaws to facilitate detection when used in conjunction with FLAWFINDER DEVELOPER and FLAWFINDER CLEANER Sprays. Water washable.

ROCOL FLAWFINDER is a non-destructive inspection system that is designed to provide a fast, reliable method for visual detection of cracks or flaws, which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings, etc.

ROCOL FLAWFINDER Cleaner Spray is a fast drying, no residue cleaner that cuts through dirt, grease and grime. Zero residue. Prepares the surface for non destructive testing.

Millcool 20 Semi-Synthetic Cutting Fluid (Millers Oils)

• Bio-stability generated frin boron based composition
• Full multi metal capability
• Nitride, chlorine and phenol free formulation
• Undyed to offer good workpiece visibility

Use as a water based machining and grinding fluid.   Recommended dilution rates between 3% and 8%. Note:  Product should be stored under cover. Avoid extremes of temperature and protect from frost.

Millcool Synth Synthetic Metalworking Fluid (Millers Oils)

• High lubricity promotes excellent tool life
• Forms a stable solution in water between 50ppm and 400ppm CaCO3
• Rejects tramp oil
• Low foam product
• Free from formaldehyde, secondary amines, phenols, nitrites, chlorine and sulphur
• Does not produce sticky residues, clean in use
• Good fines handling properties
• Excellent bio-stability
• Good anti-corrosion properties
• Good workpiece visibility 

Millcool Synth is a synthetic formaldehyde- and chlorine-free metalworking fluid suitable for arduous grinding and cutting operations. For general machining, thread cutting, deep hole drilling and reaming on ferrous, high tensile and stainless steels, inconel, aluminium alloys, plastics and non ferrous composites. 

Millergrease NS Copper Anti-Seize Compound (Millers Oils)

• Easy to apply by brush, sponge or lint-free cloth
• Offers long-lasting protection against seizure to aid dismantling
• Wide operating temperature range -20 to +1100°C

Millergrease WG2 (Millers Oils)

• Good mechanical stability extends lubrication intervals
• Excellent load carrying and shock load resistance properties reduces premature component wear
• High level of water resistance ensures long lubricant service life
• Full corrosion protection of working surfaces reduces component costs

Millergrease WG2 is an off-white lithium calcium soap thickened grease, highly resistant to water washout with EP performance.

Designed for use in anti-friction and plain bearings subjected to high load and where water washout is a problem.  

Millersol EP Semi-Synthetic Metalworking Fluid (Millers Oils)

• Low-foaming to provide consistent lubrication and heat removal
• EP additives ensure excellent cutting performance and surface finish even in very arduous applications
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol EP is a semi-synthetic, formaldehyde-free metalworking fluid designed for very arduous applications where EP additives are required.

Millersol EP is recommended for use on a variety of steel and aluminium alloys as well as yellow metals.

Millersol HW Semi-Synthetic Metalworking Fluid For Hard Water Applications (Millers Oils)

• High level of lubricity additives ensures excellent cutting performance and surface finish
• Low foaming formulation and excellent emulsion stability in hard water areas provides consistent lubrication and heat removal, even in high pressure through-spindle coolant systems
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Chlorine-free and formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol HW is a semi-synthetic, formaldehyde-free metalworking fluid, designed for severe machining operations even in hard water areas.

Millersol HW is recommended for use on ferrous alloys, aluminium alloys and yellow metals.