Expert advice available from time served engineers.
Click to view our current special offers.
We offer free carriage on all orders over £39 to mainland UK.
Click to view our current special offers.
Chat with us either by phone, online or email.
Click to view our current special offers.

Cutting Fluids, Tapping Oils and Whitewater Lubricants

Banner image highlighting some of the products in this category.
MTO Runcool Premium

MTO Runcool Premium Semi-Synthetic Cutting Fluid

Series: RCSCO

MTO Runcool Premium Semi-Synthetic Cutting Fluid

  • Compatible with most water qualities up to 400ppm calcium carbonate
  • Highly resistant to bacterial and fungal degradation
  • Excellent corrosion inhibition to ferrous metals
  • Chlorine, formaldehyde, nitrite and phenol free formulation for optimum operator acceptability
  • Extremely low foaming tendency
Starting From:
£88.98 excl. VAT
£106.78 incl. VAT

MTO Runsol Whitewater EP

MTO Runsol Whitewater EP Water Soluble Cutting Fluid

Series: RSWHEP

MTO Runsol Whitewater EP Water Soluble Cutting Fluid

  • High oil content.
  • Exceptional cooling properties.
  • Good anti-corrosion inhibition to ferrous metals.
  • EP additives ensure good tool cutting and high quality surface finish.
  • Boron, formaldehyde, nitrite and phenol free formulation for optimum operator acceptability.

 

Starting From:
£59.23 excl. VAT
£71.08 incl. VAT

MTO Runcool 431AF

MTO Runcool 431AF Semi-Stynthetic Cutting Fluid

Series: RCSCO431AF

MTO Runcool 431AF Semi-Stynthetic Cutting Fluid 

  • Contains specially developed silicone-free anti-foam additives to overcome foaming in high-pressure systems using soft or de-ionised water.
  • Forms a translucent micro emulsion in most waters.
  • Compatible with most water qualities up to 400ppm calcium carbonate.
  • Highly resistant to bacterial and fungal degradation, giving freedom from bad smells or slimy deposits.
  • Offers good corrosion inhibition to ferrous metals.
  • Good resistance to contact corrosion thus allowing work pieces to be stacked without staining.
  • Chlorine, nitrite, phenol and formaldehyde free and based on highly refined mineral oil, thus giving optimum operator acceptability.
  • Creates minimal sticky residues that can easily be washed away with water.
Starting From:
£95.66 excl. VAT
£114.79 incl. VAT

MTO Runcool Ultra

MTO Runcool Ultra Semi-Synthetic Cutting Fluid

Series: RCSCOU

MTO Runcool Ultra Semi-Synthetic Cutting Fluid

  • Outstanding lubricity and extreme pressure properties.
  • Based on highly developed synthetic ester technology.
  • Chlorine-free.
    • Free from secondary amines, nitrites and phenols for the most stringent health and safety requirements.
  • Low staining potential on aluminium and its alloys.
  • Widely used for aerospace applications.
  • Forms a stable milky emulsion in waters up to 400ppm CaCO3 hardness.
  • Outstanding resistance to bacterial and fungal degradation.
  • Good rejection of tramp oil.
  • Low foaming characteristics, achieved with only silicone free anti-foams.
  • Found to be particularly effective in preventing rusting when machining cast iron.
Starting From:
£110.23 excl. VAT
£132.28 incl. VAT

QUAKER COOL 7101LF - 193 LITRE

QUAKER COOL 7101LF - 193 LITRE

Series: QUAKERCOOL7101LF

Benefits:

  • In accordance with REACH
  • Low Boron content
  • Reduced maintenance cost
  • Excellent foam properties
  • Increase tool life
  • Guaranteed surface finish especially on aluminium alloys
Starting From:
£1167.39 excl. VAT
£1400.87 incl. VAT

MTO Runneat 22 Cutting Oils

MTO Runneat 22 Cutting Oils

Series: RNNEAT22

• Enhanced lubricity promotes superior metal wetting and improved surface finish on machined parts
• Good workpiece visibility
• Low oil mist levels
• Promotes extended tool life
• Chlorine-free formulation

Starting From:
£76.33 excl. VAT
£91.60 incl. VAT

MTO TAPPING OIL - 1 LITRE

MTO TAPPING OIL - 1 LITRE

Series: THREADCUT-1L
Benefits
  • Based on highly effective extreme pressure and lubricity additives to promote ease of cutting and prolong tool life.
  • Effective on high alloy steels and can be used on all non-ferrous metals.
  • Optimum consistency so that the lubricant clings to the metal surface, even on the highest speed applications.
    Starting From:
    £12.60 excl. VAT
    £15.12 incl. VAT

    MTO Runcool ECO 4779

    MTO Runcool ECO 4779 Semi Sytnthetic Cutting Fluid For Hard Water

    Series: RCECO-4779

    A semi-synthetic medium to hard water high performance coolant.

    Benefits

    • Outstanding sump life
    • Superior corrosion protection
    • Multi-metal compatible
    • Medium-hard water tolerant
    • Extremely hard water tolerant
    • Excellent tramp oil rejection
    • Low foaming
    • Chlorine, biocide free
    • High operator acceptance
    • Clear running on cast iron
    • Non-staining on aluminium alloys
    Starting From:
    £130.16 excl. VAT
    £156.19 incl. VAT

    Image of product.

    MTO Runcool ECO 2425

    Series: RCECO-2425

    RUNCOOL ECO 2425 is a biocide-free, soft to medium water, high lubricity micro-emulsion coolant. This chlorine free metalworking fluid will perform extremely well on multi-metal applications and is machine tool friendly with extremely low foaming properties

    Starting From:
    £103.67 excl. VAT
    £124.40 incl. VAT

    MTO Runneat Cutting Oils

    MTO Runneat Cutting Oils

    Series: RNNEAT
    • Synthetic formulation with a high flash point of 2150C, greatly reduces the risk of fire in the event of a tool crash
    • The synthetic formulation greatly assists the dispersal of heat away from the machine tool
    • Chlorine free EP additive package
    • Extended tool life, increased cutting speed and improves productivity
    • Compatible for use with yellow metals without staining
    • Good workpiece visibility
    • Excellent operator acceptability, low misting
    Starting From:
    £78.33 excl. VAT
    £94.00 incl. VAT

    MTO THREAD PASTE TAPPING COMPOUND - 3KG

    MTO THREAD PASTE TAPPING COMPOUND - 3KG

    Series: RUNCUT3KG
    • Suitable for drilling, sawing and thread cutting.
    • Safe on steels, copper, brass, stainless steel and ceramics.
    • Extends tool life.
    • High anti weld features.
    • Silicone and CFCs Free.
    • Reduces heat and improves surface finish.
    • Non-drip compound for brush application or dipping small cutting tool.
    Starting From:
    £27.10 excl. VAT
    £32.52 incl. VAT

    MTO Runcut CASF 10 Neat Cutting Oil

    MTO Runcut CASF 10 Neat Cutting Oil

    Series: RCCASF10

    RUNCUT CASF 10 is an extreme pressure neat cutting oil blended from solvent refined mineral oil using selected additives, affording a high level of lubricity and EP performance.

    Suitable for machining a wide range of materials in various applications, including deep hole boring, broaching, H.D. tapping, threading and gear cutting. Arduous operations are overcome using high performance EP package. 

    • Enhanced lubricity with high EP 
    • Good workpiece visibility
    • Improved finish on machine parts
    • Low oil mist levels
    • Promotes extended tool life 
    Starting From:
    £48.00 excl. VAT
    £57.60 incl. VAT

    MTO Runcool ECO 4778

    MTO Runcool ECO 4778 Semi Sytnthetic Cutting Fluid For Soft Water

    Series: RCECO-4778

    MTO Runcool ECO 4778 Semi Sytnthetic Cutting Fluid For Soft Water 

    • Outstanding sump life
    • Superior corrosion protection
    • Multi-metal compatible
    • Medium – soft water tolerant
    • Excellent tramp oil rejection
    • Low foaming
    • Chlorine, biocide free
    • High operator acceptance
    • Clear running on cast iron
    • Non-staining on aluminium alloys
    Starting From:
    £119.01 excl. VAT
    £142.81 incl. VAT

    MTO Runcut CASF 32 Neat Cutting Oil

    MTO Runcut CASF 32 Neat Cutting Oil

    Series: RCCASF32

    Runcut CASF 32 Neat Cutting Oil is an extreme pressure neat cutting oil blended from solvent refined mineral oil using selected additives, affording a high level of lubricity and EP performance.

    Suitable for machining a wide range of materials in various applications, including broaching, H.D. tapping, threading and gear cutting. Arduous operations are overcome using high performance EP package.

    • Enhanced lubricity
    • Good workpiece visibility
    • Improved finish on machine parts
    • Low oil mist levels
    • Promotes extended tool life
    Starting From:
    £62.24 excl. VAT
    £74.69 incl. VAT

    MTO MasterGrind NF400

    MTO MasterGrind NF400

    Series: MASTERGRIND-NF400
    Benefits:
    • Fully synthetic grinding fluid.
    • Formulated to promote enhanced protection against bacterial and fungal degradation.
    • Exceptional cooling properties.
    • Good wheel flushing properties.
    • Excellent corrosion protection of machine and work pieces.
    • Nitrite, phenol and chlorine free.
    Starting From:
    £81.41 excl. VAT
    £97.69 incl. VAT

    Image of ROC53072 bottle 400g bottle

    Rocol RTD Liquid for Reaming, Tapping and Drilling

    Series: ROC-RTD-LIQUID

    ROCOL RTD® Liquid is a hand applied, lubricant for reaming, tapping and drilling, the market leader for over 60 years.

    Suitable for all metals including hardened steels, titaniums and nimonics. It can also be added to ordinary mineral cutting oil for the most severe cutting operations, such as broaching and gear cutting on the toughest metals.

    A must have product for all machine shops, tool-rooms and maintenance departments.

    Starting From:
    £32.69 excl. VAT
    £39.23 incl. VAT

    Image of ROC53020 tube 50g.

    Rocol RTD Compound for Reaming, Tapping and Drilling

    Series: ROC-RTD-COMPOUND

    ROCOL RTD® Compound is a soft paste and is suitable for all metals including hardened steels, titaniums and nimonics, in even the most severe cutting operations.

    RTD® Compound is the world leading, hand applied, lubricant for reaming, tapping and drilling and has been the market leader for over 60 years. A must have product for all machine shops, tool-rooms and maintenance departments.

    Starting From:
    £7.55 excl. VAT
    £9.06 incl. VAT

    Image of ROC53041 spray 300ml.

    Rocol RTD Foamcut Spray for Reaming, Tapping and Drilling

    Series: ROC-RTD-FOAMCUT

    ROCOL RTD® Foamcut is a metal cutting lubricant specially formulated to provide extreme pressure cutting performance in an economical to use foaming aerosol. With a low odour. Its foaming action adheres to the tool, allowing it to be applied directly to moving tools. Suitable for severe cutting operations.

    Starting From:
    £40.44 excl. VAT
    £48.53 incl. VAT

    Image of ROC53011 spray 400ml.

    Rocol RTD Spray for Reaming, Tapping and Drilling

    Series: ROC-RTD-SPRAY

    Rocol RTD® Spray is an aerosol applied metal cutting lubricant consisting of a concentrate of extreme pressure additives. It is suitable for all metals including hardened steels, titaniums and nimonics, in even the most severe cutting operations.

    A must have product for all machine shops, tool-rooms and maintenance departments.

    Starting From:
    £33.98 excl. VAT
    £40.78 incl. VAT

    Image of ROC53062 bottle 350g.

    Rocol RTD Cleancut for Reaming, Tapping and Drilling

    Series: ROC-RTD-CLEANCUT

    ROCOL RTD® Cleancut is a specially formulated, hand applied cutting lubricant designed to improve all day to day machining operations, whatever the metal being worked. It has a low viscosity, water soluble formula that is non-fuming and has a low odour. Non-staining on yellow metals, aluminium and brass.

    Starting From:
    £33.47 excl. VAT
    £40.16 incl. VAT