Roughing Turning Inserts for Lathes

• Grade P3501 is our first choice for turning stainless steel and interrupted turning of steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• WNMG negative geometry
• Trigon insert

DNMG-DR carbide turning insert for roughing

• Grade YBC252 is our best performing roughing insert for turning steel
• CVD coated
• DR chipbreaker is designed for roughing
• DNMG negative geometry
• 55° rhombic Insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• TNMG negative geometry
• Triangular insert

CNMG-DR carbide turning insert for roughing

• Grade YBC252 is our best performing roughing insert for turning steel
• CVD coated
• DR chipbreaker is designed for roughing
• CNMG negative geometry
• 80° rhombic Insert

• Grade M2501 is our first choice and best performing insert for turning stainless steel and heat resistant super alloys at low cutting speeds
• PVD coated
• AR chipbreaker is designed for roughing of stainless steel and heat-resistant super alloys
• CNMG negative geometry
• 80° rhombic Insert

• Grade P2501 is our first choice and best performing insert for turning steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• WNMG negative geometry
• Trigon insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• DNMG negative geometry
• 55° rhombic Insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• SNMG negative geometry
• Square insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• VNMG negative geometry
• 35° rhombic Insert

WNMG-DR carbide turning insert for roughing

• Grade YBC252 is our best performing roughing insert for turning steel
• CVD coated
• DR chipbreaker is designed for roughing
• WNMG negative geometry
• 80° trigonal Insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• WNMG negative geometry
• Trigon insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• CNMG negative geometry
• 80° rhombic Insert

• Grade P2501 is our first choice and best performing insert for turning steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• SNMG negative geometry
• Square insert

• Grade P3501 is our first choice for turning stainless steel and interrupted turning of steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• TNMG negative geometry
• Triangular insert

• Grade P2501 is our first choice and best performing insert for turning steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• TNMG negative geometry
• Triangular insert

• Grade P2501 is our first choice and best performing insert for turning steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• VNMG negative geometry
• 35° rhombic Insert

• Grade P3501 is our first choice for turning stainless steel and interrupted turning of steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• VNMG negative geometry
• 35° rhombic Insert

• Grade P3501 is our first choice for turning stainless steel and interrupted turning of steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• DNMG negative geometry
• 55° rhombic Insert

• Grade P3501 is our first choice for turning stainless steel and interrupted turning of steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• DNMG negative geometry
• 55° rhombic Insert

CNMG T-Max® P turning inserts feature 4 cutting edges and a neutral direction for both left and right hand cutting applications. Made with a hard carbide construction for greater rigidity and strength during machining. The CVD TICN+AL2O3+TIN coating helps reduce heat and wear prolonging the tool life.

• Grade P2501 is our first choice and best performing insert for turning steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• DNMG negative geometry
• 55° rhombic Insert

• Grade P2501 is our first choice and best performing insert for turning steel
• CVD coated
• KR chipbreaker is designed for roughing and interrupted cutting
• CNMG negative geometry
• 80° rhombic Insert