Finishing Inserts for Lathes

CCMT-EF carbide turning insert for finishing

• Grade YBM153 is our best performing finishing insert for turning steel
• CVD coated
• EF chipbreaker is designed for finishing
• CCMT positive geometry
• 80° rhombic Insert

• Grade N1001 is our first choice and best performing insert for turning aluminium and non-ferrous meterials
• AL chipbreaker designed for turning aluminium
• CCGT positive geometry
• 80° rhombic insert

DCMT-EF carbide turning insert for finishing

• Grade YBM153 is our best performing finishing insert for turning steel
• CVD coated
• EF chipbreaker is designed for finishing
• DCMT positive geometry
• 55° rhombic Insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KF chipbreaker is designed for finishing
• CCMT negative geometry
• 80° rhombic insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KF chipbreaker is designed for finishing
• DCMT negative geometry
• 55° rhombic insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• PVD coated
• KF chipbreaker is designed for finishing
• CNMG negative geometry
• 80° rhombic Insert

CNMG-EF carbide turning insert for finishing

• Grade YBM153 is our best performing finishing insert for turning steel
• CVD coated
• EF chipbreaker is designed for finishing
• CNMG negative geometry
• 80° rhombic Insert

• Grade N1001 is our first choice insert for turning aluminium and non-ferrous materials
• AL chipbreaker designed for turning aluminium and non-ferrous materials
• VCGT positive geometry
• 35° rhombic insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• PVD coated
• KF chipbreaker is designed for finishing
• DNMG negative geometry
• 55° rhombic insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KF chipbreaker is designed for finishing
• TCMT negative geometry
• Triangular insert

• Grade N1001 is our first choice and best performing insert for turning aluminium and non-ferrous materials
• AL chipbreaker designed for turning aluminium and non-ferrous materials
• DCGT positive geometry
• 55° rhombic insert

• Grade P3501 is our first choice for turning stainless steel and interrupted turning of steel
• CVD coated
• LF chipbreaker is designed for finishing of sticky materials
• DNMG negative geometry
• 55° rhombic insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KF chipbreaker is designed for finishing
• VCMT negative geometry
• 55° rhombic Insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KF chipbreaker is designed for finishing
• WNMG negative geometry
• 80° trigon insert

CNMG-DF carbide turning insert for finishing

• Grade YBC152 is our best performing finishing insert for turning steel
• CVD coated
• DF chipbreaker is designed for finishing
• CNMG negative geometry
• 80° rhombic Insert

• Grade M2501 is our first choice and best performing insert for turning stainless steel and heat resistant super alloys at low cutting speeds
• PVD coated
• AF chipbreaker is designed for finishing of stainless steel and heat-resistant super alloys
• CNMG negative geometry
• 80° rhombic Insert

DNMG-EF carbide turning insert for finishing

• Grade YBM153 is our best performing finishing insert for turning steel
• CVD coated
• EF chipbreaker is designed for finishing
• DNMG negative geometry
• 55° rhombic Insert

WNMG-EF carbide turning insert for finishing

• Grade YBM153 is our best performing finishing insert for turning steel
• CVD coated
• EF chipbreaker is designed for finishing
• WNMG negative geometry
• 80° trigonal Insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KF chipbreaker is designed for finishing
• TNMG negative geometry
• Triangular insert

WNMG-DF carbide turning insert for finishing

• Grade YBC152 is our best performing finishing insert for turning steel
• CVD coated
• DF chipbreaker is designed for finishing
• WNMG negative geometry
• 80° trigonal Insert Insert

DCMT-DF carbide turning insert for finishing

• Grade YBC152 is our best performing finishing insert for turning steel
• CVD coated
• DF chipbreaker is designed for finishing
• DCMT positive geometry
• 55° rhombic Insert

DNMG-DF carbide turning insert for finishing

• Grade YBC152 is our best performing finishing insert for turning steel
• CVD coated
• DF chipbreaker is designed for finishing
• DNMG negative geometry
• 55° rhombic Insert

• Grade KA9000 is our universal grade for turning most steels and cast iron
• CVD coated
• KF chipbreaker is designed for finishing
• SCMT negative geometry
• Square insert

• Grade P3501 is our first choice for turning stainless steel and interrupted turning of steel
• CVD coated
• LF chipbreaker is designed for finishing of sticky materials
• CNMG negative geometry
• 80° rhombic Insert