Metal Working Fluids Lubrication

Millersol EP Semi-Synthetic Metalworking Fluid (Millers Oils)

• Low-foaming to provide consistent lubrication and heat removal
• EP additives ensure excellent cutting performance and surface finish even in very arduous applications
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol EP is a semi-synthetic, formaldehyde-free metalworking fluid designed for very arduous applications where EP additives are required.

Millersol EP is recommended for use on a variety of steel and aluminium alloys as well as yellow metals.

ROCOL RTD® Cleancut is a specially formulated, hand applied cutting lubricant designed to improve all day to day machining operations, whatever the metal being worked. It has a low viscosity, water soluble formula that is non-fuming and has a low odour. Non-staining on yellow metals, aluminium and brass.

Millcool 20 Semi-Synthetic Cutting Fluid (Millers Oils)

• Bio-stability generated frin boron based composition
• Full multi metal capability
• Nitride, chlorine and phenol free formulation
• Undyed to offer good workpiece visibility

Use as a water based machining and grinding fluid.   Recommended dilution rates between 3% and 8%. Note:  Product should be stored under cover. Avoid extremes of temperature and protect from frost.

ROCOL RTD® Foamcut is a metal cutting lubricant specially formulated to provide extreme pressure cutting performance in an economical to use foaming aerosol. With a low odour. Its foaming action adheres to the tool, allowing it to be applied directly to moving tools. Suitable for severe cutting operations.

Rocol RTD® Spray is an aerosol applied metal cutting lubricant consisting of a concentrate of extreme pressure additives. It is suitable for all metals including hardened steels, titaniums and nimonics, in even the most severe cutting operations.

A must have product for all machine shops, tool-rooms and maintenance departments.