Expert advice available from time served engineers.
Click to view our current special offers.
We offer free carriage on all orders over £39 to mainland UK.
Click to view our current special offers.
Chat with us either by phone, online or email.
Click to view our current special offers.

ZSD High Precision Indexable 'U' Drilling System From ZCC-CT

Banner image highlighting some of the products in this category.
ZTD03 3xD Indexable Drilling System

ZSD03 3xD Indexable Drilling System

Series: ZSD03
  • Optimised edge design for stable operation with new chip breaker geometry
  • Special grades for outer and inner insert for more efficiency by different materials
  • Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
  • Large chip pocket better for chip removal
  • Optimised insert seat and clamping, Less vibration and longer tool life

Please contact us for the offer to be applied

Starting From:
£178.51 excl. VAT
£214.21 incl. VAT

ZTD04 4xD Indexable Drilling System

ZSD04 4xD Indexable Drilling System

Series: ZSD04

The benfits of the 4xD indexable drilling bodies from ZCC-CT are:

  • Optimised edge design for stable operation with new chip breaker geometry
  • Special grades for outer and inner insert for more efficiency by different materials
  • Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
  • Large chip pocket better for chip removal
  • Optimised insert seat and clamping, Less vibration and longer tool life

Please contact us for the offer to be applied

Starting From:
£204.56 excl. VAT
£245.47 incl. VAT

ZTD05 5xD Indexable Drilling System

ZSD05 5xD Indexable Drilling System

Series: ZSD05
  • Optimised edge design for stable operation with new chip breaker geometry
  • Special grades for outer and inner insert for more efficiency by different materials
  • Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
  • Large chip pocket better for chip removal
  • Optimised insert seat and clamping, Less vibration and longer tool life
Starting From:
£225.00 excl. VAT
£270.00 incl. VAT

ZTD02 2xD Indexable Drilling System

ZSD02 2xD Indexable Drilling System

Series: ZSD02
The benfits of the 2xD indexable drilling bodies from ZCC-CT inlcude:
  • Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
  • Large chip pocket better for chip removal
  • Optimised insert seat and clamping, Less vibration and longer tool life
Starting From:
£170.97 excl. VAT
£205.16 incl. VAT

Image of product.

SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker

Series: SPMX060204-EM

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

  • Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
  • Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
  • ap· d.o.c. = 1~4(mm)
  • f= 0.2~0.5(mm/r)
Starting From:
£7.88 excl. VAT
£9.46 incl. VAT

Image of product.

SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker

Series: SPMX060204-LM

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

Starting From:
£8.63 excl. VAT
£10.36 incl. VAT

Image of product.

SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker

Series: SPMX060204-XM

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

Starting From:
£6.05 excl. VAT
£7.26 incl. VAT

Image of product.

SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker

Series: SPMX040203-EM

The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

  • Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
  • Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
  • ap· d.o.c. = 1~4(mm)
  • f= 0.2~0.5(mm/r)
Starting From:
£8.12 excl. VAT
£9.74 incl. VAT

Image of product.

SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker

Series: SPMX050204-EM

The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

  • Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
  • Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
  • ap· d.o.c. = 1~4(mm)
  • f= 0.2~0.5(mm/r)
Starting From:
£6.18 excl. VAT
£7.42 incl. VAT

Image of product.

SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker

Series: SPMX040203-LM

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

Starting From:
£0.00 excl. VAT
£0.00 incl. VAT

Image of product.

SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker

Series: SPMX050204-LM

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

Starting From:
£8.27 excl. VAT
£9.92 incl. VAT

Image of product.

SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker

Series: SPMX040203-XM

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

Starting From:
£0.00 excl. VAT
£0.00 incl. VAT

Image of product.

SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker

Series: SPMX050204-XM

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

Starting From:
£8.27 excl. VAT
£9.92 incl. VAT

Image of product.

SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker

Series: SPMX140512-EM

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

  • Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
  • Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
  • ap· d.o.c. = 1~4(mm)
  • f= 0.2~0.5(mm/r)
Starting From:
£0.00 excl. VAT
£0.00 incl. VAT

Image of product.

SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker

Series: SPMX140512-LM

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

Starting From:
£0.00 excl. VAT
£0.00 incl. VAT

Image of product.

SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker

Series: SPMX140512-XM

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

Starting From:
£7.34 excl. VAT
£8.81 incl. VAT

Image of product.

SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker

Series: SPMX110408-EM

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

  • Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
  • Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
  • ap· d.o.c. = 1~4(mm)
  • f= 0.2~0.5(mm/r)
Starting From:
£0.00 excl. VAT
£0.00 incl. VAT

Image of product.

SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker

Series: SPMX110408-LM

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

Starting From:
£0.00 excl. VAT
£0.00 incl. VAT

Image of product.

SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker

Series: SPMX110408-XM

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

Starting From:
£6.87 excl. VAT
£8.24 incl. VAT

Image of product.

SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker

Series: SPMX07T308EM

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

  • Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
  • Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
  • ap· d.o.c. = 1~4(mm)
  • f= 0.2~0.5(mm/r)
Starting From:
£6.81 excl. VAT
£8.17 incl. VAT

Image of product.

SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker

Series: SPMX07T308-LM

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

Starting From:
£0.00 excl. VAT
£0.00 incl. VAT

Image of product.

SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker

Series: SPMX07T308-XM

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

Starting From:
£0.00 excl. VAT
£0.00 incl. VAT

Image of product.

SPMXT090408 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker

Series: SPMX090408-EM

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

  • Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
  • Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
  • ap· d.o.c. = 1~4(mm)
  • f= 0.2~0.5(mm/r)
Starting From:
£6.81 excl. VAT
£8.17 incl. VAT

Image of product.

SPMXT090408 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker

Series: SPMX090408-LM

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

Starting From:
£6.80 excl. VAT
£8.16 incl. VAT