High Performance Water Based Soluble Cutting Fluids

RUNCOOL PREMIUM is a bio-stable, semi-synthetic soluble cutting fluid concentrate especially suitable for use where the machine tool manufacturers recommend a coolant which contains more than 35% mineral oil.

(Recommended treat rate 3-8% in water depending on severity of application. Minimum treat rate 3% in water)

A high performance, emulsion soluble cutting fluid suitable for a wide range of applications.

(Recommended treat rate 3-8% in water depending on severity of application. Minimum treat rate 3% in water)

Runcool 431AF is a premium quality, bio-stable, semi-synthetic soluble cutting fluid designed to have very low foaming properties in soft water areas.

(Recommended treat rate 3-8% in water, depending on severity of application. For most general purpose work, a treat rate of 4-6% is normally acceptable. Minimum treat rate 3% in water)

RUNCOOL ULTRA is a high oil content, bio-stable, water soluble cutting fluid for applications where maximum EP performance and low foaming are required.

(Recommended treat rate 5-10% in water, depending on severity of application. For most general purpose work, a treat rate of 6-8% is normally acceptable. Minimum treat rate 5% in water)

Benefits:

• In accordance with REACH
• Low Boron content
• Reduced maintenance cost
• Excellent foam properties
• Increase tool life
• Guaranteed surface finish especially on aluminium alloys

A semi-synthetic medium to hard water high performance coolant.

RUNCOOL ECO 2425 is a biocide-free, soft to medium water, high lubricity micro-emulsion coolant. This chlorine free metalworking fluid will perform extremely well on multi-metal applications and is machine tool friendly with extremely low foaming properties

RUNCOOL ECO 4778 is an extremely adaptable high performance, biocide free, chlorine free, high lubricity micro-emulsion biostable high oil semi- synthetic water mix cutting fluid offering truly universal multi-metal compatibility