Filter by:
Ball Nose Milling Cutters Milling Tools
ZCC-CT TM-5BP Series 5 Flute KMS405 Coated Carbide Ball Nose Reduced Neck End Mill for Titanium & Heat-Resistant Alloy Machining
Series: TM-5BP
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
Starting From:
£34.01 excl. VAT
£40.81 incl. VAT
£34.01 excl. VAT
£40.81 incl. VAT
Offer Price From:
£28.91excl. VAT
£34.69incl. VAT
£28.91excl. VAT
£34.69incl. VAT
CLARKSON HSS Co8 4 Flute Ball Nose End Mill
Series: 115102
CLARKSON HSS Co8 4 Flute Ball Nose End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£23.88 excl. VAT
£28.66 incl. VAT
£23.88 excl. VAT
£28.66 incl. VAT
Offer Price From:
£19.12excl. VAT
£22.94incl. VAT
£19.12excl. VAT
£22.94incl. VAT
NANO-MILL Max-Mill JKB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 150mm OAL
Series: JKB**02
Max-Mill Coated Carbide 2 Flute Extra Long Length Ball Nose End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium.
MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
Starting From:
£33.65 excl. VAT
£40.38 incl. VAT
£33.65 excl. VAT
£40.38 incl. VAT
ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel
Series: HM-4BL
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£38.11 excl. VAT
£45.73 incl. VAT
£38.11 excl. VAT
£45.73 incl. VAT
CLARKSON TiALN HSS Co8 2 Flute Ball Nose Slot Drill
Series: 112121
CLARKSON TiALN HSS Co8 2 Flute Ball Nose Slot Drill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
Starting From:
£19.50 excl. VAT
£23.40 incl. VAT
£19.50 excl. VAT
£23.40 incl. VAT
Offer Price From:
£15.62excl. VAT
£18.74incl. VAT
£15.62excl. VAT
£18.74incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill
Series: JB**02
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
Starting From:
£8.88 excl. VAT
£10.66 incl. VAT
£8.88 excl. VAT
£10.66 incl. VAT
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
Series: HM-4B
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£32.54 excl. VAT
£39.05 incl. VAT
£32.54 excl. VAT
£39.05 incl. VAT
NANO-MILL Ali-Max AB**02 Series 2 Flute Ball Nose Solid Carbide End Mill for Machining Aluminium
Series: AB**02
ALI-MAX Solid Carbide 2 Flute Ball Nose End Mill from Nano-Mill is 1st choice for machining aluminium and non ferrous material, giving superior surface finish. The special Hi-Helix geometry enables better chip removal.
Starting From:
£9.55 excl. VAT
£11.46 incl. VAT
£9.55 excl. VAT
£11.46 incl. VAT
Max-Mill 4 Flute Coated Carbide Ball Nose Milling Cutters
Series: JB**04
Max-Mill Coated Carbide 4 Flute Ball Nosed End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
Starting From:
£9.79 excl. VAT
£11.75 incl. VAT
£9.79 excl. VAT
£11.75 incl. VAT
Powder Metal 2 Flute Short Length Ball Nosed Slot Drill Weldon Shank (Europa)
Series: 112140
Powder Metal 2 Flute Short Length Ball Nosed Slot Drill Weldon Shank (Europa)
- Sabre coating for increased wear resistance at high speeds.
- Designed for steels, stainless steels and cast iron.
- Suitable for use on difficult to cut materials.
Starting From:
£15.14 excl. VAT
£18.17 incl. VAT
£15.14 excl. VAT
£18.17 incl. VAT
Offer Price From:
£12.57excl. VAT
£15.08incl. VAT
£12.57excl. VAT
£15.08incl. VAT
Powder Metal 2 Flute Standard Length Ball Nose Weldon Shank (Europa)
Series: 114140
Powder Metal 2 Flute Standard Length Ball Nose Weldon Shank (Europa)
- Sabre coating for increased wear resistance at high speeds.
- Designed for steels, stainless steels and cast iron.
- Suitable for use on difficult to cut materials.
Starting From:
£23.58 excl. VAT
£28.30 incl. VAT
£23.58 excl. VAT
£28.30 incl. VAT
Offer Price From:
£19.58excl. VAT
£23.50incl. VAT
£19.58excl. VAT
£23.50incl. VAT
Short Length Ball Nose Extended Neck For Graphite (Europa Tool)
Series: 103333
Short Length Ball Nose Extended Neck For Graphite (Europa Tool)
- High hardness coating for increased wear resistance.
- High performance on graphite and non-metals.
- Unique ultra fine diamond coating for high quality surface finish.
Starting From:
£108.60 excl. VAT
£130.32 incl. VAT
£108.60 excl. VAT
£130.32 incl. VAT
Offer Price From:
£86.88excl. VAT
£104.26incl. VAT
£86.88excl. VAT
£104.26incl. VAT
Short Length Ball Nose Extended Neck 2 Flute Milling Cutters For Graphite (Europa)
Series: 106333
Short Length Ball Nose Extended Neck 2 Flute Milling Cutters For Graphite (Europa)
- High hardness coating for increased wear resistance.
- High performance on graphite and non-metal
- Unique ultra fine diamond coating for high quality surface finish.
Starting From:
£124.46 excl. VAT
£149.35 incl. VAT
£124.46 excl. VAT
£149.35 incl. VAT
Offer Price From:
£99.57excl. VAT
£119.48incl. VAT
£99.57excl. VAT
£119.48incl. VAT