Aluminium & Non-Ferrous
Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters
Series: E454
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters
Series: E453
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
Ali-Mill 3 Flute 45 Degree Carbide Milling Cutters for Aluminium
Series: A453
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
4 Flute Coated Carbide Long Series General Purpose End Mill (STARKE Eco-Mill)
Series: EL454
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
Ali-Mill 2 Flute 45 Degree Carbide Milling Cutters for Aluminium
Series: A452
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters
Series: EB452
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
Eco-Mill 2 Flute Coated Solid Carbide Slot Drill
Series: E452
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
Ali-Mill 3 Flute Long Series carbide Slot Drill for Aluminium (STARKE AL453)
Series: AL453
- Suitable for machining aluminium and other non-ferrous materials
- Mirror polishied flutes
- Excellent surface finishe and superior chip removal
- Micrograin carbide
- Hi-helix geometry
- Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
2 Flute Long Series carbide Slot Drill for Aluminium (STARKE Ali-Mill)
Series: AL452
- Suitable for machining of aluminium and other non-ferrous materials.
- Mirror polished fl utes
- Excellent surface finishes, superior chip removal.
- Micrograin carbide
- Hi-helix geometry
- Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
Ali-Mill 2 Flute Ball Nosed Solid Carbide for Aluminium
Series: AB382
- Solid micrograin carbide
- 38 degree helix geometry enable better chip removal
- Polished flutes for superior surface finish
- 2 flutes
FRANKEN Alu-Cut 2544 Series 2 & 3 Flute Long Length End mill
Series: 2544
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
Starting From:
£30.30 excl. VAT
£36.36 incl. VAT
£30.30 excl. VAT
£36.36 incl. VAT
Offer Price From:
£27.27excl. VAT
£32.72incl. VAT
£27.27excl. VAT
£32.72incl. VAT
Emuge Franken Metric Drill Thread Mill 2xD
Series: ZBGF-MULTI-M
Emuge Franken solid carbide circular drill thread mill
- Drill, thread mill and chamfer with 1 tool
- Speed up cycle times and reduce tooling cost with 1 tool
- Suitable for steel, stainless steel, cast iron, heat resistant super alloys and non-ferrous materials
- 2xD
- Metric thread
Emuge Franken UNC Drill Thread Mill 2xD
Series: ZBGF-MULTI-UNC
Emuge Franken solid carbide circular drill thread mill
- Drill, thread mill and chamfer with 1 tool
- Speed up cycle times and reduce tooling cost with 1 tool
- Suitable for steel, stainless steel, cast iron, heat resistant super alloys and non-ferrous materials
- 2xD
- UNC thread
Emuge Franken UNF Drill Thread Mill 2xD
Series: ZBGF-MULTI-UNF
Emuge Franken solid carbide circular drill thread mill
- Drill, thread mill and chamfer with 1 tool
- Speed up cycle times and reduce tooling cost with 1 tool
- Suitable for steel, stainless steel, cast iron, heat resistant super alloys and non-ferrous materials
- 2xD
- UNF thread
Osborn 810505 HSS 8% Cobalt TiN Coated Jobber Drill
Series: 810505
- Bright finish body for maximum chip clearance
- Self centring split point above 1.6mm
- TiN coated on working area for longer tool life
Ideal for drilling steel, cast steel-alloyed and non-alloyed, stainless steel, titanium and aluminium. Particularly suited to stainless steel and titanium.
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
Starting From:
£1.06 excl. VAT
£1.27 incl. VAT
£1.06 excl. VAT
£1.27 incl. VAT
HSCR Series Tialn Coated Fine Pitch Roughing HSS Milling Cutters
Series: HSCR
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
Series: NM-2EP
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
Starting From:
£17.68 excl. VAT
£21.22 incl. VAT
£17.68 excl. VAT
£21.22 incl. VAT
HSC Series 3 Flute Tialn Coated HSS Milling Cutters
Series: HSC3
- 3 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
Series: 144303
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
Starting From:
£15.83 excl. VAT
£19.00 incl. VAT
£15.83 excl. VAT
£19.00 incl. VAT
Offer Price From:
£13.06excl. VAT
£15.67incl. VAT
£13.06excl. VAT
£15.67incl. VAT
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
Series: NM-2BP
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
Starting From:
£20.11 excl. VAT
£24.13 incl. VAT
£20.11 excl. VAT
£24.13 incl. VAT
OSBORN 820502 Series HSS 8% Cobalt Stub Drill DIN1897
Series: 820502
Features:
- HSS 8% cobalt stub drill
- Suitable for drilling thin materials with portable drills
- Special twist drills for automatic and turret lathes
- Ideal for general drilling in steels and stainless steels
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
ALU-XP 135303 -Single Flute Slot Drill for Machining Aluminium
Series: 135303
1 Flute ALU-XP Slot Drill for Machining Aluminium and Non-Ferrous Materials. Micro Grain Carbide End Mill with High Helix Geometry for Excellent surface finishes and Superior Chip Removal.
Starting From:
£11.20 excl. VAT
£13.44 incl. VAT
£11.20 excl. VAT
£13.44 incl. VAT
Offer Price From:
£9.25excl. VAT
£11.10incl. VAT
£9.25excl. VAT
£11.10incl. VAT
Osborn 821601 Steam Tempered HSS Morse Taper Shank Drill
Series: 821601
Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic.
- • Bright steam tempered (Black Oxide finish).
- • Morser taper shank.
- • Standard DIN 345
- • Point angle 118 degree
- • H8 tolerance
Starting From:
£13.22 excl. VAT
£15.86 incl. VAT
£13.22 excl. VAT
£15.86 incl. VAT
HSC Series 4 Flute Tialn Coated HSS Milling Cutters
Series: HSC4
- 4 flute HSSE end mill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life