3xD Stub Drill Solid Carbide Drills Hole Making Tools
SU Series Solid Coated Carbide Twist Drill 3xD (STUB) ZCC-CT
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Optimised Chipbreaker
- High Rake angle
- 3xD stub drill
- Series available up to 8xD in selected sizes
£20.88 excl. VAT
£25.06 incl. VAT
UD Series Solid Coated Carbide Twist Drill 3xD Stub Drill For Stainless Steel & HRSA
- For high-speed drilling of Tough Steel, Stainless Steel and Heat-Resistant Alloys
- TiAlN coated for increased tool life
- Optimised Chipbreaker and sharp cutting edge to avoid built up edge
- High Rake angle
- Through coolant
- 3xD stub drill
£32.59 excl. VAT
£39.11 incl. VAT
ZCC-CT Solid Coated Carbide Stub Drill Through Coolant
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Optimised Chipbreaker
- High Rake angle
- Through coolant
- 3xD stub drill
- Series available up to 8xD in selected sizes
£35.40 excl. VAT
£42.48 incl. VAT
ZCC-CT ST Series Solid Coated Carbide Through Coolant Drill
- For high-speed drilling of Tough Steel, Stainless Steel and Heat-Resistant Alloys
- TiAlN coated for increased tool life
- Optimised Chipbreaker and sharp cutting edge to avoid built up edge
- High Rake angle
- Through coolant
- 3xD stub drill
£33.22 excl. VAT
£39.86 incl. VAT
ZCC-CT 1105SC03 SC Series Solid Coated Carbide Twist Drill for Aluminium & Non-Ferrous Drilling - 3xD Stub Drill
1105SC03 SC Series by ZCC-CT
- Designed to machine materials with short chips such as aluminium and non-ferrous material
- Improved chip flow due to flute geometry and chip space
- Superior finish and avoids built up edge
- 3xD stub drill
£8.52 excl. VAT
£10.22 incl. VAT
ZCC-CT 1534SH03 SH Series Solid Coated Carbide Twist Drill for Hardened Steel Drilling - 3xD Stub Drill
1534SH03 SH Series by ZCC-CT.
- Solid carbide with high performance coating for drilling high hardness steel (HRc 40-60) and higher tensile strength.
- 3xD stub drill
£24.70 excl. VAT
£29.64 incl. VAT
ZCC-CT 1165PA03 PA Series 3 Flute Solid Coated Carbide Twist Drill Aluminium & Non-Ferrous Drilling - 3xD Stub Drill
1165PA03 PA Series by ZCC-CT.
- Designed to machine materials with short chips such as aluminium and non-ferrous materials
- 3xD stub drill
- 3 flutes
£14.45 excl. VAT
£17.34 incl. VAT
ZCC-CT 1534SP03C SP Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 3xD Stub Drill
1534SP03C SU Series by ZCC-CT. Solid coated carbide drill.
- For high-speed drilling of Steel, Stainless Steel, Cast Iron, Aluminium & Non-Ferrous material and Heat-Resistant Alloys
- TiAlN coated for increased tool life
- 3xD stub drill
- Through coolant
£39.15 excl. VAT
£46.98 incl. VAT
ZCC-CT 1634SU03C SU Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 3xD Stub Drill
1634SU03C SU Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Weldon shank
- 3xD stub drill
- Through coolant
£24.51 excl. VAT
£29.41 incl. VAT
ZCC-CT 1734SU03C SU Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 3xD Stub Drill
1734SU03C SU Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- 3xD stub drill
- Through coolant
£32.71 excl. VAT
£39.25 incl. VAT
Eco-Drill Solid Carbide Stub Drill for General Machining
- Micrograin Carbide
- TiALN Coated for Increased Tool Life
- For General Machining of Steel, Stainless Steel and Cast Iron
- 3XD
- Without Through Coolant
£6.79 excl. VAT
£8.15 incl. VAT
£4.75excl. VAT
£5.70incl. VAT
KENNAMETAL Solid Carbide 3xD Through Coolant GOdrill
- GOdrill — the first microdrill from Kennametal.
- General purpose SC drill for most materials.
- Marginless design for reduced friction and heat — thus longer tool life.
- Optimized gashing design for microdrilling ensures free flow of chips in the center of the drill.
- Size range from 1mm - 20mm
£52.10 excl. VAT
£62.52 incl. VAT
KENNAMETAL Solid Carbide 3xD GOdrill
- GOdrill — the first microdrill from Kennametal.
- General purpose SC drill for most materials.
- Marginless design for reduced friction and heat — thus longer tool life.
- Optimized gashing design for microdrilling ensures free flow of chips in the center of the drill.
- Size range from 1mm - 20mm
£37.15 excl. VAT
£44.58 incl. VAT
Emuge Franken Solid Carbide Through Coolant Stub Drill
Emuge Franken Basic Drill series for high performance drilling.
- For high-speed drilling of Steel, Stainless Steel, Cast Iron, Aluminium and Heat-Resistant Alloys
- Coated for increased tool life
- 3xD stub drill
- Through coolant
- Out performing most major brands on the market
£37.50 excl. VAT
£45.00 incl. VAT