Expert advice available from time served engineers.We offer free carriage on all orders over £39 to mainland UK.Chat with us either by phone, online or email.Click to view our current special offers.
  1. Home Page
  2. Aluminium & Non-Ferrous

Milling Cutters for Aluminium and Non-Ferrous Materials

Banner image highlighting some of the products in this category.
Image of an E454 series 4 flute end mill milling cutter.

Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters

Series: E454

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 25mm
Image indicating the E454 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E454 series end mill manufacturer STARKE.
Starting From:
£7.78 excl. VAT
£9.34 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Image of an E453 series 3 flute end mill milling cutter

Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters

Series: E453

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 20mm
Image indicating the E453 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E453 series end mill manufacturer STARKE.
Starting From:
£7.78 excl. VAT
£9.34 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Image of HSS 8% cobalt tin coated jobber drill.

Osborn 810505 HSS 8% Cobalt TiN Coated Jobber Drill

Series: 810505
    • Bright finish body for maximum chip clearance
    • Self centring split point above 1.6mm
    • TiN coated on working area for longer tool life

Ideal for drilling steel, cast steel-alloyed and non-alloyed, stainless steel, titanium and aluminium. Particularly suited to stainless steel and titanium.

* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5

Starting From:
£1.06 excl. VAT
£1.27 incl. VAT
View Products
Osborn 820505 HSS Cobalt TiN Coated Goldex Stub Drill

Osborn 820505 HSS 8% Cobalt TiN Coated Stub Drill

Series: 820505
    • Bright finish body for maximum chip clearance
    • Self centring split point above 1.6mm
    • TiN coated on working area for longer tool life

Ideal for drilling steel, cast steel-alloyed and non-alloyed, stainless steel, titanium and aluminium. Particularly suited to stainless steel and titanium.

* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5

Starting From:
£2.80 excl. VAT
£3.36 incl. VAT
Clearance
View Products
STARKE Ali-Mill A453 Series 3 Flute 45 Degree Solid Carbide End Mill for Machining Aluminium.

Ali-Mill 3 Flute 45 Degree Carbide Milling Cutters for Aluminium

Series: A453

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

  • Polished flutes for superior surface finish.
  • The special Hi-Helix geometry enables better chip removal.
  • Micrograin carbide
Starting From:
£10.48 excl. VAT
£12.58 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Image of product.

HSC Series 2 Flute Tialn Coated HSS Milling Cutters

Series: HSC2
  • 2 flute HSSE slot drill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE
View Products

HSC Series 3 Flute Tialn Coated HSS Milling Cutters

Series: HSC3
  • 3 flute HSSE slot drill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE
View Products

HSCR Series Tialn Coated Fine Pitch Roughing HSS Milling Cutters

Series: HSCR
  • 3 & 4 flute HSSE end mill ripper
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£21.46 excl. VAT
£25.75 incl. VAT
Buy 2 Get 1 FREE
View Products
STARKE Ali-Mill A452 Series 2 Flute 45 Degree Solid Carbide End Mill for Machining Aluminium.

Ali-Mill 2 Flute 45 Degree Carbide Milling Cutters for Aluminium

Series: A452

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

  • Polished flutes for superior surface finish.
  • The special Hi-Helix geometry enables better chip removal.
  • Micrograin carbide
Starting From:
£10.48 excl. VAT
£12.58 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
ALI-MAX Solid Carbide 3 Flute Long Length End Mill

Ali-Max 3 Flute Long Length Milling Cutters For Aluminium

Series: LAE**03

ALI-MAX Solid Carbide 3 Flute Long Length End Mill from Nano Mill.

  • 55 degree helix
  • Manufactured from ultra fine micrograin carbide
  • Sharp cutting edge for greater swarf evacuation
Starting From:
£17.32 excl. VAT
£20.78 incl. VAT
View ProductsCutting Data

HSC Series 4 Flute Tialn Coated HSS Milling Cutters

Series: HSC4
  • 4 flute HSSE end mill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE
View Products
STARKE ECO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill.

Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters

Series: EB452

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Available diameter sizes between 1mm and 20mm
Image indicating the EB452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the EB452 series end mill manufacturer STARKE.
Starting From:
£7.78 excl. VAT
£9.34 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Image of steam tempered HSS morse taper shank drill.

Osborn 821601 Steam Tempered HSS Morse Taper Shank Drill

Series: 821601

Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic.

  • • Bright steam tempered (Black Oxide finish).
  • • Morser taper shank.
  • • Standard DIN 345
  • • Point angle 118 degree
  • • H8 tolerance
Starting From:
£13.22 excl. VAT
£15.86 incl. VAT
View Products
ALI-MAX Solid Carbide 2 Flute End Mill

Ali-Max 2 Flute Solid Carbide Milling Cutters for Machining Aluminium

Series: AE**02

ALI-MAX Solid Carbide 2 Flute Slot Drill from Nano-Mill 

  • 55 degree helix
  • Manufactured from ultra fine micrograin carbide
  • Sharp cutting edge for greater swarf evacuation
  • Ideal for aluminium and non-ferrous machining

 

 

Starting From:
£7.40 excl. VAT
£8.88 incl. VAT
Clearance
View ProductsCutting Data
Image of HSS 8% cobalt stub drill.

OSBORN 820502 Series HSS 8% Cobalt Stub Drill DIN1897

Series: 820502

Features:

  • HSS 8% cobalt stub drill
  • Suitable for drilling thin materials with portable drills
  • Special twist drills for automatic and turret lathes
  • Ideal for general drilling in steels and stainless steels

* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5

Starting From:
£0.99 excl. VAT
£1.19 incl. VAT
Clearance
View Products
ALI-MAX Solid Carbide 3 Flute End Mill

Ali-Max 3 Flute Solid Carbide Milling Cutters for Machining Aluminium

Series: AE**03

ALI-MAX Solid Carbide 3 Flute End Mill from Nano-Mill 

  • 55 degree helix
  • Manufactured from ultra fine micrograin carbide
  • Sharp cutting edge for greater swarf evacuation
  • Ideal for aluminium and non-ferrous machining
Starting From:
£8.23 excl. VAT
£9.88 incl. VAT
View ProductsCutting Data
Image of product.

Alu-Cut 2544K Series 2 & 3 Flute Long Length Milling Cutters

Series: 2544K

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

  • Highest metal removal rates for stable milling processes
  • Several corner radii per diameter
  • Center cutting
  • GLT coated for improved tool life, works in copper alloys in addition to aluminum
  • Rough and finish with 1 tool
Starting From:
£40.70 excl. VAT
£48.84 incl. VAT
Offer Price From:
£36.63excl. VAT
£43.96incl. VAT
10% DISCOUNT
View ProductsCutting Data
STARKE Eco-Mill Coated Carbide 2 Flute End Mill.

Eco-Mill 2 Flute Coated Solid Carbide Slot Drill

Series: E452

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm to 20mm
Image indicating the E452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E452 series end mill manufacturer STARKE.
Starting From:
£7.78 excl. VAT
£9.34 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Image of HPD-SUS HSS vanadium tin coated 3xD stub drill.

Osborn HPD-SUS HSS Vanadium TiN Coated (Stainless)Stub Drill

Series: 820434
  • High helix-sharp cutting edges to avoid built-up and to be suitable for high performance drilling.
  • Wide flute and stub length-increasing chip removal and reducing vibration and deflection.
  • High vanadium HSS-EX material with superior TiN coating - higher speed and feed, longer service life.
  • High quality-good surface finishes, high productivity

Designed for drilling in stainless steels, mild steels, aluminium, aluminium alloy, aluminium die cast, copper alloy etc.

Starting From:
£5.95 excl. VAT
£7.14 incl. VAT
View Products
Image of product.

FRANKEN Alu-Cut 2544 Series 2 & 3 Flute Long Length End mill

Series: 2544

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

  • Highest metal removal rates for stable milling processes
  • Several corner radii per diameter
  • Center cutting
  • Uncoated
  • Available with high performance GLT coating works in copper alloys in addition to aluminum
  • Rough and finish with 1 tool
Starting From:
£30.30 excl. VAT
£36.36 incl. VAT
Offer Price From:
£27.27excl. VAT
£32.72incl. VAT
10% DISCOUNT
View ProductsCutting Data
Image of product.

Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium

Series: 144303

Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium 

  • Excellent surface finishes.
  • Superior chip removal
  • Micrograin solid carbide substrate
  • Mirror polished Flutes
  • Suitable for high speed machining of aluminium and other non-ferrous materials
  • Corner protected.
  • Long series
Starting From:
£15.83 excl. VAT
£19.00 incl. VAT
Offer Price From:
£13.06excl. VAT
£15.67incl. VAT
15% DISCOUNT
View ProductsCutting Data
Image of product.

Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium

Series: 143303

Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium 

  • Excellent surface finishes.
  • Superior chip removal
  • Micrograin solid carbide substrate
  • Mirror polished Flutes
  • Suitable for high speed machining of aluminium and other non-ferrous materials
  • Corner protected.
  • Long series
Starting From:
£18.35 excl. VAT
£22.02 incl. VAT
View ProductsCutting Data
ALI-MAX Solid Carbide 2 Flute Long Length End Mill

2 Flute Long Length End Mill for Aluminium LAE Series

Series: LAE**02

ALI-MAX Solid Carbide 2 Flute Long Length End Mill from Nano Mill.

  • 55 degree helix
  • Manufactured from ultra fine micrograin carbide
  • Sharp cutting edge for greater swarf evacuation
Starting From:
£17.32 excl. VAT
£20.78 incl. VAT
View ProductsCutting Data
Image of product.

2 Flute Carbide Reduced Neck End Mill for Aluminium

Series: 153303
  • Excellent surface finishes.
  • Superior chip removal
  • Micrograin solid carbide substrate
  • Mirror polished Flutes
  • Suitable for high speed machining of aluminium and other non-ferrous materials
  • Corner protected.
  • Long series
Starting From:
£15.44 excl. VAT
£18.53 incl. VAT
Offer Price From:
£12.75excl. VAT
£15.30incl. VAT
15% DISCOUNT
View ProductsCutting Data