Filter by:
Brand
Range
Diameter
> Show more
Insert Type
Square Shoulder Milling Indexable Milling Milling Tools
20mm EMP01 Series 90 Degree Indexable End Mill for APKT11 Inserts - 2 Teeth
Series: EMP01-020-G20-AP11-02C
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£50.41ex VAT
£60.49inc VAT
View Products
£50.41ex VAT
£60.49inc VAT
25mm EMP01 Series 90 Degree Indexable End Mill for APKT11 Inserts - 4 Teeth
Series: EMP01-025-G25-AP11-04C
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£62.03ex VAT
£74.44inc VAT
View Products
£62.03ex VAT
£74.44inc VAT
16mm EMP01 Series 90 Degree Indexable End Mill for APKT11 Inserts - 2 Teeth
Series: EMP01-016-G16-AP11-02C
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£50.41ex VAT
£60.49inc VAT
View Products
£50.41ex VAT
£60.49inc VAT
12mm EMP01 Series 90 Degree Indexable End Mill for APKT11 Inserts - Single Tooth
Series: EMP01-012-G16-AP11-01
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£40.33ex VAT
£48.40inc VAT
View Products
£40.33ex VAT
£48.40inc VAT
25mm EMP01 Series 90 Degree Indexable End Mill for APKT16 Inserts - 2 Teeth
Series: EMP01-025-G25-AP16-02C
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£51.94ex VAT
£62.33inc VAT
View Products
£51.94ex VAT
£62.33inc VAT
32mm EMP01 Series 90 Degree Indexable End Mill for APKT11 Inserts - 4 Teeth
Series: EMP01-032-G32-AP11-04
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£79.09ex VAT
£94.91inc VAT
View Products
£79.09ex VAT
£94.91inc VAT
32mm EMP01 Series 90 Degree Indexable End Mill for APKT16 Inserts - 3 Teeth
Series: EMP01-032-G32-AP16-03C
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£62.03ex VAT
£74.44inc VAT
View Products
£62.03ex VAT
£74.44inc VAT
40mm EMP01 Series 90 Degree Indexable End Mill for APKT16 Inserts - 4 Teeth
Series: EMP01-040-G32-AP16-04C
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£72.12ex VAT
£86.54inc VAT
View Products
£72.12ex VAT
£86.54inc VAT
50mm EMP01 Series 90 Degree Indexable End Mill for APKT16 Inserts - 5 Teeth
Series: EMP01-050-G32-AP16-05
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£81.42ex VAT
£97.70inc VAT
View Products
£81.42ex VAT
£97.70inc VAT
63mm EMP01 Series 90 Degree Indexable End Mill for APKT16 Inserts - 6 Teeth
Series: EMP01-063-G32-AP16-06
- 90 Degree Shoulder End Mill
- Excellent for slotting, ramping and shoulder milling with a sharp cutting geometry
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 12mm-63mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£91.49ex VAT
£109.79inc VAT
View Products
£91.49ex VAT
£109.79inc VAT
50mm EMP02 Series 90 Degree Indexable Face Mill for APKT11 Inserts - 6 Teeth
Series: EMP02-050-A22-AP11-06C
- 90 Degree for Square Shoulder Milling
- Positive inserts provide a soft cutting geometry.
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 40mm-125mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£138.79ex VAT
£166.55inc VAT
View Products
£138.79ex VAT
£166.55inc VAT
100mm EMP02 Series 90 Degree Indexable Face Mill for APKT11 Inserts - 10 Teeth
Series: EMP02-100-B32-AP11-10C
- 90 Degree for Square Shoulder Milling
- Positive inserts provide a soft cutting geometry.
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 40mm-125mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£268.27ex VAT
£321.92inc VAT
View Products
£268.27ex VAT
£321.92inc VAT
50mm EMP02 Series 90 Degree Indexable Face Mill for APKT16 Inserts - 5 Teeth
Series: EMP02-050-A22-AP16-05C
- 90 Degree for Square Shoulder Milling
- Positive inserts provide a soft cutting geometry.
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 40mm-125mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£134.15ex VAT
£160.98inc VAT
View Products
£134.15ex VAT
£160.98inc VAT
63 mm EMP02 Series 90 Degree Indexable Face Mill for APKT16 Inserts - 6 Teeth
Series: EMP02-063-A22-AP16-06C
- 90 Degree for Square Shoulder Milling
- Positive inserts provide a soft cutting geometry.
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 40mm-125mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£173.46ex VAT
£208.15inc VAT
View Products
£173.46ex VAT
£208.15inc VAT
80mm EMP02 Series 90 Degree Indexable Face Mill for APKT16 Inserts - 7 Teeth
Series: EMP02-080-A27-AP16-07C
- 90 Degree for Square Shoulder Milling
- Positive inserts provide a soft cutting geometry.
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 40mm-125mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£199.26ex VAT
£239.11inc VAT
View Products
£199.26ex VAT
£239.11inc VAT
100mm EMP02 Series 90 Degree Indexable Face Mill for APKT16 Inserts - 8 Teeth
Series: EMP02-100-B32-AP16-08C
- 90 Degree for Square Shoulder Milling
- Positive inserts provide a soft cutting geometry.
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 40mm-125mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£255.87ex VAT
£307.04inc VAT
View Products
£255.87ex VAT
£307.04inc VAT
125mm EMP02 Series 90 Degree Indexable Face Mill for APKT16 Inserts - 6 Teeth
Series: EMP02-125-B40-AP16-06C
- 90 Degree for Square Shoulder Milling
- Positive inserts provide a soft cutting geometry.
- Inserts to suit are available in a large range of grades for various materials
- Diameter Range available from 40mm-125mm
- New through coolant holes for increased performance, chip control/tool life.
Starting From:
£358.22ex VAT
£429.86inc VAT
View Products
£358.22ex VAT
£429.86inc VAT
50mm EMP09 Series 90 Degree Indexable Face Mill for Tangential Milling - 6 Teeth
Series: EMP09-050-A22-LN08-06C
- 90 Degree Face Mill
- High cost benefit factor due to 16 cutting edges.
- Thick Insert Geometry for improved stability and break resistance.
- Different chip breakers for excellent chip control.
- Two insert sizes available.
Starting From:
£160.51ex VAT
£192.61inc VAT
View Products
£160.51ex VAT
£192.61inc VAT
63mm EMP09 Series 90 Degree Indexable Face Mill for Tangential Milling - 8 Teeth
Series: EMP09-063-A22-LN08-08C
- 90 Degree Face Mill
- High cost benefit factor due to 16 cutting edges.
- Thick Insert Geometry for improved stability and break resistance.
- Different chip breakers for excellent chip control.
- Two insert sizes available.
Starting From:
£192.30ex VAT
£230.76inc VAT
View Products
£192.30ex VAT
£230.76inc VAT
80mm EMP09 Series 90 Degree Indexable Face Mill for Tangential Milling - 7 Teeth
Series: EMP09-080-A27-LN12-07C
- 90 Degree Face Mill
- High cost benefit factor due to 16 cutting edges.
- Thick Insert Geometry for improved stability and break resistance.
- Different chip breakers for excellent chip control.
- Two insert sizes available.
Starting From:
£223.31ex VAT
£267.97inc VAT
View Products
£223.31ex VAT
£267.97inc VAT
100mm EMP09 Series 90 Degree Indexable Face Mill for Tangential Milling - 9 Teeth
Series: EMP09-100-B32-LN12-09C
- 90 Degree Face Mill
- High cost benefit factor due to 16 cutting edges.
- Thick Insert Geometry for improved stability and break resistance.
- Different chip breakers for excellent chip control.
- Two insert sizes available.
Starting From:
£310.92ex VAT
£373.10inc VAT
View Products
£310.92ex VAT
£373.10inc VAT
25mm EMP13 Series 90 Degree Indexable End Mill for ANGX11 4 Edged Inserts - 2 Teeth
Series: EMP13-025-XP25-AN11-02
- 90 Degree End Mill.
- Specially developed cutting edges for high quality 90 degree square shoulder milling.
- Extra thick inserts for better stability.
- Polished, high precision geometry inserts for aluminium alloys, steel and cast iron.
- Two insert sizes available.
Starting From:
£82.19ex VAT
£98.63inc VAT
View Products
£82.19ex VAT
£98.63inc VAT
32mm EMP13 Series 90 Degree Indexable End Mill for ANGX11 4 Edged Inserts - 3 Teeth
Series: EMP13-032-XP32-AN11-03
- 90 Degree End Mill.
- Specially developed cutting edges for high quality 90 degree square shoulder milling.
- Extra thick inserts for better stability.
- Polished, high precision geometry inserts for aluminium alloys, steel and cast iron.
- Two insert sizes available.
Starting From:
£114.76ex VAT
£137.71inc VAT
View Products
£114.76ex VAT
£137.71inc VAT
40mm EMP13 Series 90 Degree Indexable End Mill for ANGX11 4 Edged Inserts - 4 Teeth
Series: EMP13-040-XP32-AN11-04
- 90 Degree End Mill.
- Specially developed cutting edges for high quality 90 degree square shoulder milling.
- Extra thick inserts for better stability.
- Polished, high precision geometry inserts for aluminium alloys, steel and cast iron.
- Two insert sizes available.
Starting From:
£170.58ex VAT
£204.70inc VAT
View Products
£170.58ex VAT
£204.70inc VAT