ZCC-CT
ZCC-CT 1536ST05C ST Series Solid Coated Carbide Through Coolant Twist Drill for Steel, Stainless Steel & Heat-Resistant-Alloy Drilling - 5xD
Series: 1536ST05C
1534ST05C ST Series by ZCC-CT. Solid coated carbide drill.
- For high-speed drilling of Tough Steel, Stainless Steel and Heat-Resistant Alloys
- TiAlN coated for increased tool life
- 5xD jobber drill
- Through coolant
Starting From:
£39.80 excl. VAT
£47.76 incl. VAT
£39.80 excl. VAT
£47.76 incl. VAT
Coated Carbide Jobber Drill for General machining - 5xD
Series: 1536SU05
Features:
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Optimised Chipbreaker
- High Rake angle
- 5xD jobber drill
- Series available up to 8xD in selected sizes
Starting From:
£25.91 excl. VAT
£31.09 incl. VAT
£25.91 excl. VAT
£31.09 incl. VAT
Carbide Through Coolant General Purpose Jobber Drill- 5xD
Series: 1536SU05C
Features:
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Optimised Chipbreaker
- High Rake angle
- Through coolant
- 5xD jobber drill
- Series available up to 8xD in selected sizes
Starting From:
£41.45 excl. VAT
£49.74 incl. VAT
£41.45 excl. VAT
£49.74 incl. VAT
SU Series Solid Coated Carbide Twist Drill 3xD (STUB) ZCC-CT
Series: 1534SU03
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Optimised Chipbreaker
- High Rake angle
- 3xD stub drill
- Series available up to 8xD in selected sizes
Starting From:
£20.88 excl. VAT
£25.06 incl. VAT
£20.88 excl. VAT
£25.06 incl. VAT
UD Series Solid Coated Carbide Twist Drill 3xD Stub Drill For Stainless Steel & HRSA
Series: 1534UD03C
- For high-speed drilling of Tough Steel, Stainless Steel and Heat-Resistant Alloys
- TiAlN coated for increased tool life
- Optimised Chipbreaker and sharp cutting edge to avoid built up edge
- High Rake angle
- Through coolant
- 3xD stub drill
Starting From:
£32.59 excl. VAT
£39.11 incl. VAT
£32.59 excl. VAT
£39.11 incl. VAT
UD Series Solid Coated Carbide Twist Drill 5xD Jobber Drill For Stainless Steel & HRSA
Series: 1536UD05C
- For high-speed drilling of Tough Steel, Stainless Steel and Heat-Resistant Alloys
- TiAlN coated for increased tool life
- Optimised Chipbreaker and sharp cutting edge to avoid built up edge
- High Rake angle
- Through coolant
- 5xD jobber drill
Starting From:
£38.27 excl. VAT
£45.92 incl. VAT
£38.27 excl. VAT
£45.92 incl. VAT
CNMG Insert For Machining Stainless Steel YBM253 (ZCC-CT)
Series: CNMG-EM YBM253
CNMG-EM carbide turning insert
- Grade YBM253 is our best performing insert for turning stainless steel
- CVD coated
- EM chipbreaker is designed for medium machining
- CNMG negative geometry
- 80° rhombic Insert
Starting From:
£5.89 excl. VAT
£7.07 incl. VAT
£5.89 excl. VAT
£7.07 incl. VAT
ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters
Series: HM-4E
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£15.68 excl. VAT
£18.82 incl. VAT
£15.68 excl. VAT
£18.82 incl. VAT
ZCC-CT UM-4E Series 4 Flute Variable Helix Milling Cutters
Series: UM-4E
ZCC-CT UM-4E Series 4 Flute Standard Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
Starting From:
£15.19 excl. VAT
£18.23 incl. VAT
£15.19 excl. VAT
£18.23 incl. VAT
CCMT Insert For Machining Stainless Steel YBM253 (ZCC-CT)
Series: CCMT-EM YBM253
CCMT-EM carbide turning insert
- Grade YBM253 is our best performing insert for turning stainless steel
- CVD coated
- EM chipbreaker is designed for medium machining
- CCMT positive geometry
- 80° rhombic Insert
Starting From:
£3.96 excl. VAT
£4.75 incl. VAT
£3.96 excl. VAT
£4.75 incl. VAT
Solid Coated Carbide Through Coolant Twist Drill 8XD ZCC-CT
Series: 1538SU08C
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Optimised Chipbreaker
- High Rake angle
- Through coolant
- 8xD long series
- Series also available in 3xD and 5xD
Starting From:
£80.24 excl. VAT
£96.29 incl. VAT
£80.24 excl. VAT
£96.29 incl. VAT
CNMG Insert For Machining Heat Resistant Super Alloys YBG205 (ZCC-CT)
Series: CNMG-EM YBG205
CNMG-EM carbide turning insert
- Grade YBG205 is our best performing insert for turning heat-resistant super alloys
- CVD coated
- EM chipbreaker is designed for medium machining
- CNMG negative geometry
- 80° rhombic Insert
Starting From:
£5.81 excl. VAT
£6.97 incl. VAT
£5.81 excl. VAT
£6.97 incl. VAT
ZSD03 3xD Indexable Drilling System
Series: ZSD03
- Optimised edge design for stable operation with new chip breaker geometry
- Special grades for outer and inner insert for more efficiency by different materials
- Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
- Large chip pocket better for chip removal
- Optimised insert seat and clamping, Less vibration and longer tool life
Please contact us for the offer to be applied
Starting From:
£178.51 excl. VAT
£214.21 incl. VAT
£178.51 excl. VAT
£214.21 incl. VAT
WNMG Insert For Machining Stainless Steel YBM253 (ZCC-CT)
Series: WNMG-EM YBM253
WNMG-EM carbide turning insert
- Grade YBM253 is our best performing insert for turning stainless steel
- CVD coated
- EM chipbreaker is designed for medium machining
- WNMG negative geometry
- 80° trigonal Insert
Starting From:
£4.88 excl. VAT
£5.86 incl. VAT
£4.88 excl. VAT
£5.86 incl. VAT
ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters
Series: HM-2BP
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£23.53 excl. VAT
£28.24 incl. VAT
£23.53 excl. VAT
£28.24 incl. VAT
CNMG Insert For Machining Steel YBC252 Grade (ZCC-CT)
Series: CNMG-DM YBC252
CNMG-DM carbide turning insert
- Grade YBC152 is our best performing insert for turning steel
- CVD coated
- DM chipbreaker is designed for medium machining
- CNMG negative geometry
- 80° rhombic Insert
Starting From:
£3.74 excl. VAT
£4.49 incl. VAT
£3.74 excl. VAT
£4.49 incl. VAT
ZCC-CT 5501/5601 90 Degree Solid Carbide Deburring Cutter
Series: 5501/5601-R90
Features:
- Micro grain carbide substrate.
- TiAlN Coated for longer tool life.
- Point angle: 90 degree
- Weldon shank.
For machining steels, stainless steel and cast iron.
Starting From:
£12.92 excl. VAT
£15.50 incl. VAT
£12.92 excl. VAT
£15.50 incl. VAT
DCMT Insert For Machining Stainless Steel YBM253 (ZCC-CT)
Series: DCMT-EM YBM253
DCMT-EM carbide turning insert
- Grade YBM253 is our best performing insert for turning stainless steel
- CVD coated
- EM chipbreaker is designed for medium machining
- DCMT positive geometry
- 55° rhombic Insert
Starting From:
£3.91 excl. VAT
£4.69 incl. VAT
£3.91 excl. VAT
£4.69 incl. VAT
WNMG Insert For Machining Heat Resistant Super Alloys YBG205 (ZCC-CT)
Series: WNMG-EM YBG205
WNMG-EM carbide turning insert
- Grade YBG205 is our best performing insert for turning heat-resistant super alloys
- CVD coated
- EM chipbreaker is designed for medium machining
- WNMG negative geometry
- 80° trigonal Insert
Starting From:
£4.70 excl. VAT
£5.64 incl. VAT
£4.70 excl. VAT
£5.64 incl. VAT
.jpg&w=640&q=75)
PCLNR/L 95 Deg. Lever Lock Turning Tool Holder (CN**)
Series: TTH-PCLNR/L
- Lever Clamp System
- Suitable for CN** Style Inserts
- 95 Degree Approach
Starting From:
£41.13 excl. VAT
£49.36 incl. VAT
£41.13 excl. VAT
£49.36 incl. VAT
ZSD04 4xD Indexable Drilling System
Series: ZSD04
The benfits of the 4xD indexable drilling bodies from ZCC-CT are:
- Optimised edge design for stable operation with new chip breaker geometry
- Special grades for outer and inner insert for more efficiency by different materials
- Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
- Large chip pocket better for chip removal
- Optimised insert seat and clamping, Less vibration and longer tool life
Please contact us for the offer to be applied
Starting From:
£204.56 excl. VAT
£245.47 incl. VAT
£204.56 excl. VAT
£245.47 incl. VAT
ZCC-CT Solid Coated Carbide Stub Drill Through Coolant
Series: 1534SU03C
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Optimised Chipbreaker
- High Rake angle
- Through coolant
- 3xD stub drill
- Series available up to 8xD in selected sizes
Starting From:
£35.40 excl. VAT
£42.48 incl. VAT
£35.40 excl. VAT
£42.48 incl. VAT
DNMG Insert For Machining Stainless Steel YBM253 (ZCC-CT)
Series: DNMG-EM YBM253
DNMG-EM carbide turning insert
- Grade YBM253 is our best performing insert for turning stainless steel
- CVD coated
- EM chipbreaker is designed for medium machining
- DNMG negative geometry
- 55° rhombic Insert
Starting From:
£7.21 excl. VAT
£8.65 incl. VAT
£7.21 excl. VAT
£8.65 incl. VAT
DCMT Insert For Machining Steel YBC252 Grade (ZCC-CT)
Series: DCMT-HM YBC252
DCMT-HM carbide turning insert
- Grade YBC252 is our best performing insert for turning steel
- CVD coated
- HM chipbreaker is designed for medium machining
- DCMT positive geometry
- 55° rhombic Insert
Starting From:
£3.91 excl. VAT
£4.69 incl. VAT
£3.91 excl. VAT
£4.69 incl. VAT